How to Assemble Ottoman Storage Side gas Lift Bed Frame | Complete guide

Never seen and explained before on You Tube, this is how:
This is how to how to Assemble Ottoman Storage Side gas Lift Bed Frame.
A Complete instructions from start to finish. Very convenient if one has a limited space for storage.
Thanks for watching, and please "Subscribe & give Thumbs Up", if you have not done so, also Spread the word "Jevon Randh" Extras.
#jevonrandh#assembleottomanbed
Please click below for other DIY Videos:
• Microwave Bulb Replace...
• How To Replace Your Fr...
• 3 Tools To Dehusk Coc...
• How To Repair Leaking ...
• How To Clean PS4/Pro ...
• Dual flush toilet keep...
• How to Assemble Ottoma...

[@lilyfattore2009]

Thank you very much,your video help my husband so much. Gracie.

[@JevonRandh]

I'm so glad!, Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@hennessycool]

Thanks for taking the time to show us how to assembled the Ottoman storage bed...OKAY

[@JevonRandh]

I appreciate

[@billtully2346]

Thank you. Very helpful

[@JevonRandh]

Glad it was helpful!

[@ladyrosepetel]

So helpful. Thank you!

[@JevonRandh]

Glad it was helpful!

[@carolinedavis106]

Thank you

[@oladipoakinmade1746]

Thanks!! This was a very helpful video

[@JevonRandh]

you are welcome

[@ange.w.s]

Thanks this has just helped me when putting together this bed. Those pistons had me bamboozled

[@JevonRandh]

Great to hear!

[@deletebilderberg]

This video was a huge help. Many thanks!!

[@JevonRandh]

Glad it helped!

[@Evenhex]

Thank you so much

[@JevonRandh]

👍

[@kinton95]

Nice one really helpful

[@JevonRandh]

Glad to hear that,

[@soniafarooq29]

Thankyou for this video

[@JevonRandh]

My pleasure 😊

[@my4evernever131]

Thank you so much 💕💕

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani

[@melmel368]

Thank You. Very Helpful!

[@JevonRandh]

Thanks for watching, and please "Subscribe & give Thumbs Up", if you have not done so, also Spread the word "Jevon Randh" Recipes.

[@abot789]

Thank you man, I thought my pistons were broken but was just a bit stiff.

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@AnthonyWabo]

Thank you mate, i am getting the same bed next week, cheers!

[@JevonRandh]

Glad I could help

[@bluebear6133]

Where do you get the bed from

[@JevonRandh]

@@bluebear6133 Amazon

[@joedias7946]

@@JevonRandhthe

[@coollad4722]

How is it mate?

[@vikramgoel6496]

Thanks!

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@ayy2193]

Gas pistons wouldn't move down but found the solution - the gas pistons were so stiff they literally wouldn't move a cm, we thought they needed replacing but they didn't - the key is to pull down with both hands WHERE THE PISTON is with the mattres on top, this way the force goes right on it, and less likely to damage the bed from too much force at the end - this way you can get it moving and doing it on both sides loosens them up enough for it to work properly

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@e.r.7785]

Yesssssss thank you, I've spent the last 4 hours going mad about it thinking I did something wrong, that was extremely helpful thanks 🙏🏽

[@daddydavinci1946]

You're a legend mate!!

[@pn81]

Thanks a lottttttt!! U were a saviour !! God bless

[@ahmadnawaz3058]

Thx so much

[@JevonRandh]

Thanks, Please do not forget to share Jevon Randh recipes only channel in Konkani

[@redhawkrobin]

Does anyone know the specs on the screws that fastens the pistons ?

[@aslamchowdhury6305]

what is that velcro handle thing called?

[@soniafarooq29]

Quick question i have double ottoman gas bed i want to paint/decorate my sons room, do i need to take all the storage out from the underneath, & mattress off then just slowly lift the bed frame to the side to paint the wall. Or do i need to completely open the entire bed again. When i bought my bed the workers fixed/assembled the whole bed for me.

[@JevonRandh]

Honestly, if you have enough space move to otherside.

[@jolieengule2891]

Thank u I have a question I have the same put I’m missing some of those lil black things to put together how do u call the and where can I buy them please thanks

[@JevonRandh]

black clamps?

[@annabellebrinkins2922]

what are the black brackets that you used to connect the wood together called ?

[@JevonRandh]

BLACK METAL CORNER BRACKETS OTTOMAN LIFT UP BED SPARE PARTS

[@sadikshyahumagain4399]

Hi,
What are the tools you have used to assemble the bed?
Is the tool same for every bed?

[@JevonRandh]

if you are assembling this type of Ottoman Bed, than yes.

[@empireman1077]

Allen key is the tool

[@UKPlateSpotter]

👌

[@JevonRandh]

👍

[@apexacquisition]

does anyone know the dimensions of each slat? I need to get a replacement slat and not sure if they're 53MM wide or another size

[@leenorton9100]

Hi, A couple of the wooden slabs broke on mine and I'm trying to fit replacement parts. I'm having trouble getting the plastic fittings for the wooden slabs out of the frame so I can put new ones in. Any idea how to get the old ones out?

[@JevonRandh]

If these are difficult to find, sawn timber are easily available in the DIY stores, cut them according to your size, hope this would help

[@empireman1077]

@@JevonRandh hello, had the bed for about 5 years, but after a very hot weather the wooden slaps just fall out
Like they shrunk, I know wood won't shrink
The frame is twisted to 1 side & hard to keep down flat ?

[@patriciagallacher2905]

@@empireman1077 you need to move the bottom corner of the bed either to the right or left slightly this will make it square, even on both sides so there is no strain or stress on the parts.

[@susanelliott1]

Do you have the memory fo as m mattress for the same bed bug a small double?

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@yeoman2551]

Thanks man, only got half the bed delivered at first with no instructions. Raging, I got a refund and then the other half came 😂 still no instructions though so thank you very much.

[@JevonRandh]

Glad I could help

[@surajpookkate6129]

What do you call the wooden strips and from where one can buy those ?

[@JevonRandh]

wooden slats, Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@nels6822]

Looks nice, where did u get from? Amazon? Or IKEA?

[@JevonRandh]

Ebay

[@saidarav7583]

Can you set gas lift both side ? Right or left?

[@JevonRandh]

yes, both sides

[@abasinNasimi2016]

Did you add lift up to regular bed?

[@JevonRandh]

no, Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani

[@isleybruh]

When I insert the gas bar it stops the bed from moving up and down completely. How do I fix it??

[@JevonRandh]

Please check if the gas bar is working, inform the manufacture to replace it.

[@samosa434]

Or check if it's the right way round

[@ayy2193]

Found the solution - the gas pistons were so stiff they literally wouldn't move a cm, we thought they needed replacing but they didn't - the key is to pull down with both hands WHERE THE PISTON is with the mattres on top, this way the force goes right on it, and less likely to damage the bed from too much force at the end - this way you can get it moving and doing it on both sides loosens them up enough for it to work properly

[@VirussDetected]

Patrao...
From Chief Cook to Fitter zalo kit re 😂😂
Nonetheless 👍

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@VirussDetected]

@@JevonRandh but this is not cooking mure.. but I see all recepies...

[@JevonRandh]

Just an ad, 🤣

[@harveymaskell9338]

can you open it from either side?

[@JevonRandh]

👍

[@thestarswillshineagain1824]

hey can you get the bed to lift from any side?

[@JevonRandh]

that's true

[@thestarswillshineagain1824]

@@JevonRandh thankyou so much!!

[@mattballeste1]

Mine wont stay up with the mattress on top ,if I take the mattress off it stays up. Any ideas what I'm doing wrong

[@JevonRandh]

Please try again

[@thadil95]

Hi I'm currently assembling this bed right now and the pistons/hydraulics are very stiff any idea how to fix, thanks

[@JevonRandh]

assemble them and see if they are working

[@anj4776]

Hi did you get this fixed? I got a bed today and they’re so stiff they won’t go down no matter how much Force is applied :(

[@thadil95]

@@anj4776 ya it actually work when we put my mattress on it, the pistons worked straight away

[@JevonRandh]

@@anj4776 please contact your bed supplier

[@patriciagallacher2905]

You are not meant to lift it up and down until mattress is on.

[@meepmeep7462]

My bed won’t close after assembly, is there a way to resolve this?

[@JevonRandh]

restart whole process again, Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@sarahmed29]

Can u choose which side it lifts from

[@JevonRandh]

sure,

[@thehell88]

I have set up about 20 similar beds a day, and the floor you have set up is no use at all because it is a very thin and fragile fabric. We used wooden floors so that the bed has much more resistance.

[@JevonRandh]

👍

[@amyalexander8055]

Yip like cheap weed suppressant. I need mine higher off tge floor wood a wooded thick frame attached work then paint it same colour as base

[@ujaalaniazi5083]

Hi, when we order online these beds, do they come with base cardboards or not like those that sit on the floor?

[@my4evernever131]

Awesome thanks

[@celineamore3914]

how long did it take you to do this

[@JevonRandh]

approximately 2 hrs

[@nkenchington6575]

Feet? Mine's got feet, but it looks like I need to drill into the frame to fit them, as there are no holes!

[@JevonRandh]

there is nothing on the bottom

[@footballvhy4496]

on the bottom frame can you take them off again

[@JevonRandh]

you can

[@jediknight108]

Thank you - Hare Krishna

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@samueljason9787]

Why is one side of my bed lower than the other ?
The side that is lower is where you lift it up but it’s making my bed lopsided

[@JevonRandh]

check the size or contact the manufacturer

[@Sujapillai]

Where did you get the bed from ?

[@JevonRandh]

online

[@svanaunni4124]

Online from where ?

[@ramanjiii1745]

@@svanaunni4124 Argos

[@The_Success_Core]

My bed didn’t come with the black cover on the bottom but it’s the same bed

[@JevonRandh]

Please contact the provider or you may buy from your local DIY store, Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@Modzilla32]

Can you let us know where to buy one?

[@JevonRandh]

try Amazon

[@jayasundaraweerasuriyamudi8398]

I bought mine from wayfair

[@amyalexander8055]

Wish we saw this before taking 7 hours to build super king size same as this NEVER AGAIN

[@JevonRandh]

thanks

[@jacknorman8439]

wd40 and my full body weight wouldnt move one ditached piston, tried the methonf whilst attached to the bed and we ended up sat on either side ontop of the bed to get it to move....it didnt, FLM

[@JevonRandh]

okay

[@taimanelemuelu7538]

My slats always snap off when I put to much weight on bed

[@JevonRandh]

🤣

[@Mrgreen2558]

This beds are original from the ottoman empire is ottoman design beds am I correct

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@sherazg7634]

Mine doesn’t stay down help me

[@JevonRandh]

Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@thekiwifruit3659]

I got given the wrong amount of bolts, what do I do?

[@JevonRandh]

contact the company you purchased from

[@thekiwifruit3659]

They don’t care

[@JevonRandh]

which company?

[@nishab3568]

Jevon Randh is it possible for you to come and build mine I have the bed frame just not the slats n metal parts

[@desireunikorn5018]

@@thekiwifruit3659 SUE 'EM

[@artfte]

OOOOOOO the bed will collapse ,!!! you have the washers and the spring washers on the wrong side ,my friend

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@keshaborja8564]

Let's go to woodprix, if you want to learn how to build it yourself.

[@JevonRandh]

Please try

[@keshaborja8564]

@@JevonRandh OK

[@johnydeep1568]

How much it cost you?

[@JevonRandh]

$380

[@johnydeep1568]

@@JevonRandh ihave buy same bed for 170$in offerup..in usa!😉

[@davidmiroslav7829]

U missed the part how the frame goes in or connects to the weight bar

[@JevonRandh]

👍

[@LindajoyceB]

Ive ordered end lift is it same assembly as no instructio with it

[@lauradrew177]

Didn't show what size screws went in where 🙄

[@JevonRandh]

sizes are different for every bed

[@Darksoul_4]

😂😂😂😂 worke Lol

[@JevonRandh]

Thanks, Please do not forget to subscribe and share Jevon Randh recipes only channel in Konkani.

[@versacewho-topic7381]

How do I insert a wooden slab back in after it fell out?

[@JevonRandh]

I had this similiar problem, I bought similar size from my local DIY shop and cut into exact size and replaced it.