Learn How To Solder for FPV
Vložit
- čas přidán 7. 09. 2024
- 🙋🏼♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
🧰 All my workshops (live & replays)
🧑🎓 All my Tutorials
📋 All my Guides
📺 All my Videos Add Free
🎬 Directors Cut Videos
⏰ Bench Time Live Hangouts
🤝 1:1 Help/Support
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv....
If you feel like building a 5" Freestyle Drone is too hard, you just need the right guidance.
So, I built a course with 71 highly detailed but simple modules, breaking down absolutely everything! They're can't be anything missing, if there is, I will add it. There is something every beginner must do when getting into FPV and that is learning how to solder. I know it can seem quite daunting, after all it is hard enough to learn how to fly and how to drones actually work, let alone having to solder. But with flying comes crashing, and that means fixing your drone so you are going to have to learn to solder. So in this video, I am going to share with you how I would learn to solder if I had to start again.
*
▶️ If this has helped, please consider subscribing!
► www.youtube.co...
🙋🏼♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
🧰 All my workshops (live & replays)
🧑🎓 All my Tutorials
📋 All my Guides
📺 All my Videos Add Free
🎬 Directors Cut Videos
⏰ Bench Time Live Hangouts
🤝 1:1 Help/Support
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv.com/the-hangar
This is the best video about this hobby I have seen… ever!
Thanks Tristan ! 🙏
amazingly well done video...succinct yet thorough....
I've watched a lot of videos on this topic before attempting to build my own quad, and I have to say mate, this is the best I've seen. Super clear, very concise and immediately useful! Thanks, Darren! 🙏👍
Thanks Damien. Glad you liked it!
you are the great chanell that i found.
im diving into fpv drones and using them. im quite beginner but trying to get my skills up. thank you for you for this video i would like to see more of these building video of drones )
I have a course as well that goes into all the detail
Exactly what I needed. Thanks mate, looking at doing my first receiver as I just bought a pnp. Where do you get your solder from and, if you have flux in your solder, do you need to apply flux before you start. Cheers mate
Thanks
My found this month was some solder paste in a syringe.
Uuuhhh old!!, I know...
The clue is, that it really fast hardens under uv light/sunlight.
Only need to dip in the cable tip, hold it on to the pad and give it a few seconds under uv.
I actually bought it, to repair some ripped off solder pads, and it worked nicely and more efficient, than replacing the pad.
I do want to make a video about soldering a drone with just solder paste. that would be interesting
Really good video!
Thanks Sarah!
The difference between a good solder and bad solder is usually just the fulx.
Hi I have a problem removing tin in my FC (ESC PIn ). The tin is very hard to melt even though the solder iron so hot. Do you know how can I check my board is okay or not? I worry I damage the board because of touching the soldering iron too long until get so hot
You need to use flux and have a clean tip. Use solder wick.
I wouldn’t plug it in until you’ve removed it otherwise 💥🔥💣
one more way, you can just fly, crash, repair and just keep on repeating these steps
One other vital tool I recommend everyone: a solder sucker. They're so much better than solder wick. Mess up and bridge 2 pads? Suck it. Too much solder on a pad? Suck it. Did your BNF use crappy lead free solder? Suck it.
I haven’t had any luck using a solder sucker, found they don’t work for me.
How did you get it to work?
Learn to Build a 5" Freestyle FPV Drone 🎓 www.darrenfpv.com/buildmasterclass-5freestyle
Local FPV store...😂
Practice board where can I buy?
All Good FPV Stores!