I put the NEW Interco 31” UTV BOGGERS on my 2020 Can-Am Outlander XMR 850! I just wanted to give you guys a first look at these new tires. Thanks and be sure to like, comment, share, and subscribe!
My boggers totally made my 88 bronco go places the tsl would touch. 18x39.5x15 tire is now 15 years old n still going. So is say these tires should last a while
They look good i plan on running 31 moto havoks on my 850 and you shouldn't need a fuel tuner if they reflash your ecu they can put in all the fuel tuning for what your running
Im hoping you at least put in a Dalton Clutch Kit! I swapped to 30" cryptids on my 2020 XTP 1000r, after I installed the Clutch kit this weekend, doubled my torque!
If you want some Florida boys to ride up, nators vs boggers, I have June 20th - July 7th off. set it up whiskeythrottle772@gmail.com letter rip tatter chip!
Those tires are pretty awesome I got a renegade 850 and I definitely think you're not going to have any problems so your little things are going to rip
Its not the wheel speed they just to close to bite u remeber the swamplites they looked mean but no matter the wheel speed they wouldnt bite cause tread to close
@@SketchyXC I mean they wont be terrible but even with the extra height they wont be close to the outlaw 3 u took off not till I cut them plus u will notice the pound loss
Im more interested in the boggers trail riding manners. My OL2's are garbage on the trail, maybe these would be a good 2nd set of tires for when i know im not gonna be in the mud all day. I dont think any cutting will get them close to the ol3 mud performance. Weight savings would be the most gain to cutting them imho. Either way im a tire nerd and cant wait to see them in action...lol
That tire tread is bad ass
Yea he did 💪💪
those tires lookin dope af 🔥
Thanks 💯
Jp Stephens they are huge
@@jpstephensyt you should come to Hatchie sometime soon man it's right outside corinth ms just lmk and I'll see about getting a big ass group ride
Jp Stephens you needa keep em on there
The extra ground clearance is fricking nuts
Right 🤯
Cool tires dude
I really hope you get to a 100k this summer. And always got good videos
Thanks bro 💯
Your welmcome
Hell yeah your channel is awesome🔥🔥
Thanks 🤘🏻
Looks like the floorboards are working for ya!
Yessir appreciate the help putting them on 💯
Jp Stephens no problem bro 🤙🏼💪🏼
What brand floor boards?
@@akfreerider wild boar
Now that's some HEAT!
You already know I had to come with straight heat
LOOK SICK on that bike
Appreciate it 💯
It look so cool
My boggers totally made my 88 bronco go places the tsl would touch. 18x39.5x15 tire is now 15 years old n still going. So is say these tires should last a while
I might need maybe four of those boggers.
Hell yeah! They look amazing!!!
I was the 420th like🔥🔥
They look like they are really going to pull.
Looks insane
Been waiting for this since the first post on it on ig
Hey jp I'm a huge fan of your channel and I might have to come by motivation sometime, I live in selmer so I'm pretty close
Straight boggin deep
Tired looking clean 🔥😤
I can’t wait
Can’t wait for the vid
Now all u need is snorkel risers
They look good for sure man, really curious to see how they perform🔥 when you going to be at Sugar Creek next☠
Stuck 24-7 Thanks and me too 💯, not sure yet!
***you should do a update vid on the can am so far what's broke what's wearing out ect.***
Idk how they will do, prob not bad. But i think its awesome you are testing it out!
Those tires aren’t bad yet
The food led one any ways
Looks mean AF
Wow pretty wild set rubber nice !
You should get Braydon a set of those
Looks like a pavement princess
Them tires are fire
They look amazing
I remember when you was less then 1k subs congrats man!🙏🏽
Thanks bro foreal 💯
Awesome
gotta get dem snorkels up
Jp dawg they look spicey af
They look sick bro and plus I was finally your first view love you bro
Thanks bro and thanks for the support 🤙🏻
Nice tires!! Can am rules!!
Good job 👍.
There is a reason trucks run cut boggers lol
Crazy bro
They look good i plan on running 31 moto havoks on my 850 and you shouldn't need a fuel tuner if they reflash your ecu they can put in all the fuel tuning for what your running
Yo wassup jp I was the kid that just called keep up the great work!🤙🏼🤙🏼
tires look nice man
I’m ready to see how they do
Go check the new video 🤘🏻
i saw u at kroger gas station with ur trailer today in jackson tn
Shoulda said wassup 🤙🏻
Jp Stephens i was jus leaving cool to see u man
Those tires look pretty good.
Run cut boggers
You need to tune it bad bc your piston is gonna start to melt
Dam thos are bad ass! Would like to see them on a maverick sport xrc...
Nice looking canned ham jp
Im hoping you at least put in a Dalton Clutch Kit! I swapped to 30" cryptids on my 2020 XTP 1000r, after I installed the Clutch kit this weekend, doubled my torque!
assassinators man 29.5 x 8 x 14 , then you be having no problem going places
Them tires gonna eat
Hopefully 🤙🏻
Definitely putting a pair on my honda 300 with the 73 gear reduction
Them 31s got more tred than my 44s came with new
And the tires are 💯💯
Awesome buddy 👍😎
Go with a QSC clutch, I think you're going to need. "Ride Hard , Be Safe" MN Bill
Dang man looks lit
Best atv CZcamsr every
Thanks 🤙🏻
I want to see them go through muck!!!!!!!!!!!
The outty might be floatin’
those tires are gonna eat big time!
Cool
Need to get it tuned like Braydon’s and put a 4.5in lift on her.
Damn JP I was hoping you'd jump on the nator gang.
Basic af
we'll see if them boggers clean out or turn into slicks thooo
If you want some Florida boys to ride up, nators vs boggers, I have June 20th - July 7th off. set it up whiskeythrottle772@gmail.com letter rip tatter chip!
how much were those
Yes!!
Those tires are pretty awesome I got a renegade 850 and I definitely think you're not going to have any problems so your little things are going to rip
I’m the dude you saw me ridding my dirtbike in my neighborhood
Hey jp. Man those tires are damn sick as hell. You think a smaller size would fit on my stock height 350?
Intercotire.com
@MassCityMadman well dickhead you think people like you could fuck themselves
Nice tires just they will wear evering on the bike and get upgraded tie rod ends they will break constantly
I need them on my fourtrax 300 Honda by the way
You would never be able to clean them out
I could drive them things around the earth and I could follow that can am
@@JoeSmith-tf2jo lmfao! Funny shit there dude
Run cut boggers with a huge gear reduction and they ought to do goof
They don’t need to be cut I got 30 mudder inlaws on it now 4in lift no gear reduction
I am not a can-am guy, but that thing looks mean👍
Nice I think you should send me the old tires for my 2020 outti 570 XMR
They are not going to pull like your typical atv mud tires. They will want to spin allot more than your used to
Correct
I am waiting on them 47s boggers to come out
So what kind of floorboards did you get? Love the vids, and those look amazing!
Those are Wild Boar floorboards
You my friend have made a mistake. Look forward to being stuck more often
Just needs a lift kit now, be so sick!
Yessir
Here at 240 likes your gonna need spacers!
U selling the old ones??
looks good man! Keep it up🤙🏼
Thanks man will do 🤘🏻
U better get them cut or they aint gonna clean out for crap
Love the vids jp
Hell of a great video
Thanks 💯
Def wanna see these working. They are heavy. I have the xm310s on my 650. Love them. But the 850 can prob handle the extra weight.
While boggers are nice on a truck. I don't see them being better in mud on the atv. Not enough tread spacing.
Shoot I'd put those on the old Toyota
You should go with 4” portal now and go 40s and she will eat even more
I love em brother!! They work great on my mud truck!! I think I'll get me some for the Polaris ranger 900xp
Thanks hell yea and do it 💯
Gonna have reclutch to offset the weight of those tires
I can’t wait to see how they do. When is your next ride
Its not the wheel speed they just to close to bite u remeber the swamplites they looked mean but no matter the wheel speed they wouldnt bite cause tread to close
I agree, that tread was designed for 5000lb jeep to be pushing them into the earth not 900lbs of atv. But i still think its cool to test it out
@@SketchyXC I mean they wont be terrible but even with the extra height they wont be close to the outlaw 3 u took off not till I cut them plus u will notice the pound loss
Im more interested in the boggers trail riding manners. My OL2's are garbage on the trail, maybe these would be a good 2nd set of tires for when i know im not gonna be in the mud all day. I dont think any cutting will get them close to the ol3 mud performance. Weight savings would be the most gain to cutting them imho. Either way im a tire nerd and cant wait to see them in action...lol
Those tires look amazing but i feel like they are going to dig down real bad
What are you doing with your old tires
You need to toon it
And Jon makes a cameo