Velikost videa: 1280 X 720853 X 480640 X 360
Zobrazit ovladače přehrávání
Automatické přehrávání
Přehrát
Crawls like a spider on them rocks!!!💪💪🔥🔥👍👍
That rig is off the hook! Awesome I've been wanting to build one very similar
Looks dope homie!!💪💪🔥🔥🔥🔥🔥👍👍🤙🤙🤙
Hey.. Great footage..low profile & humble,but the real fact is this rig are venomous serial killer.. Lovely.. You got skills too for this killer.. Like and Subscribed to your channel... Greeting from Singapore..
Thank you . I Really like the build . My new favourite
That is awesome. I subbed great job
Thank you .
readie where is this little slice of heaven. a few gates would be good
Definitely needs gates
Sweet my man💪
Nice car 👍
Very nice good looking crawler truck 🛻👍
Nice 👍🏾
Sick build! Did you have to do anything special to fit the axles? Debating doing this exact build, but with 2.2s.
Made my own upper front top links as kit ones are to short, changed a few link ends on the rear upper links to traxxas revo rod ends .
What shocks you running?? Looks really good
Traxxas 2660 big shocks bore with plastic caps losi mini t springs
looks good, how did you mount that battery tray on the back?
Just zip ties
Do you know what the part number is for a set of the Capra axles from axial ?
You have to buy them in parts , can't buy them in as an axle set unfortunately.
did you use capra links or have to change them i have 3 capras and want to do a lcg with one
I used the links that came with the injora chassis kit , but I made my own upper front links as the links supplied were to long
Can you do a build video?
I will see what I can do . I may do a video comparing my 2 setups .
what drive driveshafts did you go with? i ordered my build parts a few days ago and never thought of them as an issue till after
I'm using axial wb8 shafts , long for rear and a cut down short one for the front
@A readie rc I'll check them out and probably grab some....I seen exocage had to do something similar
I just kept cutting until I had full travel on the front suspension . Mine hasn't popped apart yet
What motor, esc, tranny you running in that thing?
Procrawler grind 431 transmission. Holmes 2040kv revolver. Holmes crawlmaster mini esc
What Injora Kit did you buy? Want to do the same. Cheers
The original one , not the trx4 one
@@areadierc2803 sorry another q. What transmission mount did you use? Injora doesn't have one.
@@aaronwilliams323 I hot a mate to 3d print one for me . Gspeed skid print file from thingyverse
what tires are those
Jconcepts hold tires
Ciao hai avuto problemi con link posteriori
I did change a couple rod ends on the rear to shorter ones. Front links I made my own shorter upper links
Hai piegato quello superiore posteriore dove posso vederlo da una foto grazie
휠베이스 길이가 몇미리인가요?
327mm roughly
@@areadierc2803 순정이 313미리인걸로 아는데 어떻게 길이를 늘리시나요?
@@user-it6po4hc7v it's slightly longer than 313mm stock . I have longer front rod ends and maybe the axle link mount makes it longer.
Crawls like a spider on them rocks!!!💪💪🔥🔥👍👍
That rig is off the hook! Awesome I've been wanting to build one very similar
Looks dope homie!!💪💪🔥🔥🔥🔥🔥👍👍🤙🤙🤙
Hey.. Great footage..low profile & humble,but the real fact is this rig are venomous serial killer.. Lovely.. You got skills too for this killer.. Like and Subscribed to your channel... Greeting from Singapore..
Thank you . I Really like the build . My new favourite
That is awesome. I subbed great job
Thank you .
readie where is this little slice of heaven. a few gates would be good
Definitely needs gates
Sweet my man💪
Nice car 👍
Very nice good looking crawler truck 🛻👍
Nice 👍🏾
Sick build! Did you have to do anything special to fit the axles? Debating doing this exact build, but with 2.2s.
Made my own upper front top links as kit ones are to short, changed a few link ends on the rear upper links to traxxas revo rod ends .
What shocks you running?? Looks really good
Traxxas 2660 big shocks bore with plastic caps losi mini t springs
looks good, how did you mount that battery tray on the back?
Just zip ties
Do you know what the part number is for a set of the Capra axles from axial ?
You have to buy them in parts , can't buy them in as an axle set unfortunately.
did you use capra links or have to change them i have 3 capras and want to do a lcg with one
I used the links that came with the injora chassis kit , but I made my own upper front links as the links supplied were to long
Can you do a build video?
I will see what I can do . I may do a video comparing my 2 setups .
what drive driveshafts did you go with? i ordered my build parts a few days ago and never thought of them as an issue till after
I'm using axial wb8 shafts , long for rear and a cut down short one for the front
@A readie rc I'll check them out and probably grab some....I seen exocage had to do something similar
I just kept cutting until I had full travel on the front suspension . Mine hasn't popped apart yet
What motor, esc, tranny you running in that thing?
Procrawler grind 431 transmission. Holmes 2040kv revolver. Holmes crawlmaster mini esc
What Injora Kit did you buy? Want to do the same. Cheers
The original one , not the trx4 one
@@areadierc2803 sorry another q. What transmission mount did you use? Injora doesn't have one.
@@aaronwilliams323 I hot a mate to 3d print one for me . Gspeed skid print file from thingyverse
what tires are those
Jconcepts hold tires
Ciao hai avuto problemi con link posteriori
I did change a couple rod ends on the rear to shorter ones. Front links I made my own shorter upper links
Hai piegato quello superiore posteriore dove posso vederlo da una foto grazie
휠베이스 길이가 몇미리인가요?
327mm roughly
@@areadierc2803 순정이 313미리인걸로 아는데 어떻게 길이를 늘리시나요?
@@user-it6po4hc7v it's slightly longer than 313mm stock . I have longer front rod ends and maybe the axle link mount makes it longer.