PRO BLAZE H saddlebag install on 2020 KTM 1290 Super Duke R

Sdílet
Vložit
  • čas přidán 20. 08. 2024

Komentáře • 41

  • @martingreen109
    @martingreen109 Před 3 lety +5

    Great videos mate really enjoy watching the fitment problems you encounter on the way and the solutions. Brilliant 👏

    • @DamTheDane
      @DamTheDane  Před 3 lety +1

      Thank you very much for the kind words mate 😀

  • @hedman0214
    @hedman0214 Před 3 lety +2

    Love your videos btw!

  • @naked_rider_au
    @naked_rider_au Před rokem +1

    I was convinced to buy it..then it snapped!! Still a good solution me thinks.

  • @gmac6970
    @gmac6970 Před rokem +1

    Hi my friend, you made the same mistake I did, the serial numbers on the arms should point down to the ground and not be facing outward, if you go back and study the instructions again you will see what I mean. The bags will be closer and neater.

    • @DamTheDane
      @DamTheDane  Před rokem

      Thanks for letting me know 😃 I will check that right away 😃 Have a good one 😃

    • @gmac6970
      @gmac6970 Před rokem +1

      @@DamTheDane your welcome brother ride safe. 👍

  • @rogerwilliams2902
    @rogerwilliams2902 Před 3 lety +1

    Got some of those on my GT , excellent bit of kit. You realise that you can expand them slightly undoing the outer zip ?. All the best mate.

  • @omega3litre
    @omega3litre Před měsícem +1

    Hi there do the bags lock onto the pole on each side like clip onto it as I can’t trust that clip that broke to keep it on at speed

    • @DamTheDane
      @DamTheDane  Před měsícem +1

      The bags are only held on to the poles by the clip I broke. I had a long trip about 5k miles last summer with out any problems. Also the weight of that bags when filled also help keep them in place + your legs takes the wind and not the bags :) Hope that helps you out :)

    • @omega3litre
      @omega3litre Před měsícem +1

      @@DamTheDane thanks for the reply mate

  • @alexandroskowalski
    @alexandroskowalski Před 4 měsíci

    i am crying...

  • @danilodjurica3089
    @danilodjurica3089 Před 7 měsíci

    Hello, can you give me a rough estimate of clearance value between plastic male and female part? I want to create a similar 3D printed part, but custom made for my FZ6. Thanks!

  • @bakedbeanzontoast9078
    @bakedbeanzontoast9078 Před 3 lety +1

    Fantastic, you have invented a 1290 Super Duke R Touring, so where are you off to on your first trip with your SD R Touring. 👍👍👍👍👍🇬🇧🇩🇰

    • @DamTheDane
      @DamTheDane  Před 3 lety

      The plan was to go to Norway, but my friends and I decided that we will try and do it next year insted because of Covid restrictions right now 😁
      Soon I will go back to work, so it will be a bit quiet from my end until December 🤔

    • @bakedbeanzontoast9078
      @bakedbeanzontoast9078 Před 3 lety +1

      @@DamTheDane with you on that, all my plans shot to hell this year and last because of covid, bike has just been left in the garage gathering cobwebs hardly used at all, let's hope things are even more back to normal in 2022, I mean I cant go on for ever surely. All the best mate from here in England. 👍👍👍👍🇬🇧🇬🇧🇩🇰🇩🇰

  • @carlclark6618
    @carlclark6618 Před 2 lety +2

    Nice detailed review, do you think the broken clip will be a repeated experience or just an unfortunate one off
    Cheers
    Carl

    • @DamTheDane
      @DamTheDane  Před 2 lety

      Thanks. Just a one off because of my incompetens 😅

    • @carlclark6618
      @carlclark6618 Před 2 lety +1

      @@DamTheDane lol I will buy a set then! Cheers😁

  • @edgarg6559
    @edgarg6559 Před 2 lety +1

    So I don’t have the passenger foot pegs on my bike..would I still be able to install the bracket?

    • @DamTheDane
      @DamTheDane  Před 2 lety

      I would guess so. You might need to find some washers to space the bracket a little bit further out to make up for the lose of footpegs :)

  • @RobLittleuk
    @RobLittleuk Před 9 měsíci

    Excellent video, very informative, but what dreadful music 😅

    • @DamTheDane
      @DamTheDane  Před 9 měsíci

      Thanks, and I know. Copyright freestuff isnt the best 😅

  • @HightLink
    @HightLink Před 2 měsíci

    Is it uncomfortable for the passenger?

    • @DamTheDane
      @DamTheDane  Před 2 měsíci

      Not more than the standart seat 😅

    • @HightLink
      @HightLink Před 2 měsíci +1

      @@DamTheDane got it, thx!

  • @studdg
    @studdg Před 2 lety +1

    Will a laptop fit in the bags?

    • @DamTheDane
      @DamTheDane  Před 2 lety +1

      I dont know to be honest 🤔
      I will check it when I get home in July, and get back to you ☺️

    • @mrboostification
      @mrboostification Před rokem

      @@DamTheDane did you test it? I will buy this if my dell xps 15 fits.

    • @danielbarber2677
      @danielbarber2677 Před rokem

      @@DamTheDane Please let us know!

  • @hedman0214
    @hedman0214 Před 3 lety +1

    No offence, but to equip a 1290 sdr with bags allover is like putting a pink handbag on the devils shoulder 😅

    • @DamTheDane
      @DamTheDane  Před 3 lety +4

      That is true, and in a perfect world I would have both an R and a GT, but the tax system sucks in Denmark, so I those the one I would have the most fun with 😅

    • @hedman0214
      @hedman0214 Před 3 lety +1

      I totally get it. I live in Sweden and the tax-system is just as shitty here 😅
      In spring 2022 I'm getting a 1290 sdr myself. Can't wait!

    • @DamTheDane
      @DamTheDane  Před 3 lety

      @@hedman0214 In Denmark the SDR starts from 385.000 Swedish krones (280.000DKK)🤣 More shitty than that? 🤣

    • @hedman0214
      @hedman0214 Před 3 lety +1

      Daaayuuuum! 😨 That's just sick?! How about if you buy the bike in Sweden and ship it to Denmark, is it alot in toll-fee?

    • @DamTheDane
      @DamTheDane  Před 3 lety

      @@hedman0214 It is all toll/tax, so no way around it 😟😅

  • @bikerboi1983
    @bikerboi1983 Před rokem +1

    Those clip straps look badly designed and positioned.

    • @DamTheDane
      @DamTheDane  Před rokem +1

      True. They worked better on the MT-09 I had years ago 😅 Also, why not make them in some sort of metal 🤔

    • @bikerboi1983
      @bikerboi1983 Před rokem

      @@DamTheDane yeah very odd

  • @MoodSwingZX
    @MoodSwingZX Před 29 dny

    Prize is .... Well overprized