If your missing Zero Rpm , Try this drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing If you are missing the zero rpm , When its on automatic its enabled . If you set it to manual and set the fan curve ect.. then its disabled. Link to a picture showing how to do a factory reset. drive.google.com/file/d/1mjGRYooXqCqamt3AzC9lGzvyj47oU1O0/view?usp=sharing
I get tons of request to see this picture .. If somebody is having issues seeing this picture can you please leave a message here . I'm not sure if google drive has changed something in the past 5 months thats not letting people see my files..
your welcome , glad you found the video useful and thanks for taking time to leave a success comment.. However every once in awhile if you do a restart instead of a shutdown the settings wont be activated . It has happen about 3-4 times since making this video..
@@CatabductionsAnoym yeah that is probably the problem a restart will clear everything up .. where a shut down can be sorta thought of just unplugging the thing ..In theory its suppose to close everything properly but it may not clear all the temp files ect.. So i figure the restart is clearing something for amd, forcing us to reload the profile regardless of windows fast start disabled.
Thank you, for helping with this. i been having this issue for sometime but i couldnt figure out for the life of me to get it fixed. thank u for this! you are a blessing :3
Since making this video.. I have seen twice now that the settings were not applied during a startup of my computer. So 8 out of 10 times it has worked.. I still do a quick check to see if my fans are at 0 rpm .. It is still better then before where it would never be applied.
@@dhanarsantika Hi, At 2:53 I show how to save your profile.. however if it does not get applied on a reset go back to that section but this time click on .. "Load profile" and choose the file you had saved.. You no longer have to push apply in the newer versions your fans will kick in instant..
Thanks for the disable fast boot tip. I want my video card fans to spin all the time, down to a minimum of about 35% at low temp. However, every time I powered down my system when I started it again my XFX RX580 video card would revert to zero rpm fan speed even though adrenalin reported that zero rpm was disabled. After disabling fast boot it works the way I want. Now I don't have to go into adrenalin and turn zero rpm on then off again to get the fans to spin every time I power it up. I didn't time it but it seems to make no difference in start up times with fast boot disabled either, so it's definitely a win win. I'll almost certainly need to clean my video card more often but I'll happily pay that price to keep my video card temp in the high 20C range when I'm not doing anything graphic intensive.
Totally agree, Just keep in mind if you go into sleep ,software installation force restart or just a restart , I've had it not re apply them . Maybe about 4 times since making this video. For my system its obvious my games get extremely messed up. Thanks for taking time to leave a success comment as well.
your welcome .. for the past year or so i've been using one of those usb temp displays just glued it on top of my monitor so i can always know my Temps and if the fans are working or not.. Saved me about twice now..
Hey thanks for this. I have an RX 480 that was ignoring my custom fan curves and ramping up to full speed at low temps. I thought it was a driver or card issue but disabling Fast Start has fixed it. 🙏❤️🙏
your welcome and thanks as well. One last thing, Because this isn't A 100% permanent fix, Still keep a listen for your fan.. If you shut down your computer then power it back on this should work, However with some software install restarts or just a restart in general , 1 out of say 10 restarts your zero rpm will be re enable and you will have to go back and load your profile.
did you make a profile save it then reload it? you need to also do that. However some software restarts will make it disabled again. Only a true power off and restart .. will then load your profile and with windows fast start disabled have it load up on its own. also every time you update amd software you will most likely have to make a new profile.
you have to do this on each game Profile. i found out if you start a game the Fan stops again! Because each game have own profile :( its a bit work, bu tif you do it for each game it works
cool thanks for the alternative fix as well.. I would still suggest turning off windows fast start as it works almost 100 percent of the time.. however adding your work around would probably guaranty you won't have zero rpm during game play..
Hi great guide! I still have issues with zero rpm, however my fans still run. Do you think its a wiring issue or I have to clean install the gpu drivers again? (Using a 6900xt)
are you trying to have zero rpm enabled so your fans don't actually spin? If so it could very well be your gpu is just running hot and the fans will spin no matter what. You can try to do the gpu drivers again and choose factory reset during install to see if it fixes your issue. On my system I had to disable windows update drivers as it was installing older drivers on me that would conflict with amd current drivers and software but that was 6 months ago, not sure if windows fixed that issue.
Hi sir will you please make a complete video on quad copter using pixhwk 2.4.8 and with fly sky i6 transmitter and receiver and how to programe it and some autanamous modes like rtl and its height adjustment geo tagging etc please help me with this sir
Hi i did make a complete step by step of the pixhawk here czcams.com/video/_yl4VaZnpMI/video.html the flysky i show here with the settings and mission planner settings you can still treat the i6 receiver as the cx20 receiver its the same wiring minus the 2 gimbal wires if you don't do the firmware updgrade on the i6 czcams.com/video/Vyt2d8rXkws/video.html Here is the video i show how to upgrade your transmitter. in the video i show a arduino but you can use any cheap ftdi and in the description i show a cable you can buy that you just plug into the back of your transmitter and program it quickly that way. then you can use ppm and use your variables for other things. as the pixhawk /apm use channel 5 and 6 combined for the flight modes czcams.com/video/o-gEJ_U3GDI/video.html but you will need to get the i6b receiver to take advantage of this firmware upgrade i do have 2 videos on the subject of droidplanner. here is one but these are my older video's and only one audio channel is working so if you hear nothing in the video it means your right speaker is not working. czcams.com/video/aq1ToE4B4FQ/video.html if i were to make one solid video of everything it would be a 2 to 3 hour video
The issues I've had are the opposite - ZERORPM engages at start up everytime - which never turns on the fans - I would like AMD to give us an option to permanently disable it - Will try turning off fast start to see if that helps - but this is now the 2nd 6900XT with the same issue
Hi ya its annoying its what all 3 videos i made are about, how it enables zerorpm and over heats the gpu until basically the system crashes or glitches lots , .. Making a profile like i explain will help, but has to be re loaded usually every time you turn on your pc. If you disable windows fast start then its very rare you have to re enable it. You still have to make a profile ,save it and re load it for the first time. You will also have to make a new profile for every update that comes out as well usually and every amd software crash that forces a re install .
@@ModItBetter My contact at AMD turned me onto this video after 3 months trying to figure out what the root cause was, we covered everything, until Fast start issue was brought up - so I appreciate you taking it to youtube. Well done
I've tried this and nothing. My card is a Sapphire Pulse Rx590. even when I disable 0 rpm the fans still won't work for me no matter how hot the GPU gets. It's cause the system to shutdown twice now.
yeah i feel ya, doing this and having to run my gpu max frequency at 1800mhz instead of 1900mhz other wise my computer just crashes randomly every couple of hours or less. I mean both are not a huge hits, but still should not have to be done. However it might be more the board partners then amd them selves.?!
@@ModItBetter could be. But i had a 1070ti for few years and i have never experienced any problems what so ever so i decided to upgrade and i saw the benchmarks of the rx 5700xt and i liked them so i ordered my rx 5700xt and it arrived last week and holy cr@p this mf has a lot of problems the fan speed weren't the only problem i had I've been experiencing game crashes, blue screen of death randomly comes up while gaming, gpu overheating and more crashes and errors.. amd really need to work on their drivers.
@@fredrickalexander271 yeah if u getting random blue screens .. i was as well .. change the frequency to 1800mhz instead of 1900mhz or lower ..have not crashed since I have done that.. on my 5700xt
you can see if one of your fans is not spinning right.. Only one fan controls the pwm read out for the software. I once had a wire resting on one fan. Max out the curve as well just to see if your fans go max. You can try to re install the drivers with a factor reset during driver install . I might have that picture in my description.
Hello, man, why is that? 0 rpm is still coming out of me. I was able to play the FPS game a while ago and then it suddenly shut down after the non-rotating fan of my gpu. I hope you can answer :( My GPU is Radeon RX 570.
Hi .. You need to make a profile and save the profile.. Then load load the profile.. After that disable windows fast start. After updates and random reboots. it might still go back to zero rpm. Load your saved profile again.. So if that is not your problem ,It could be one of your fans has stopped working or needs to be cleaned out. I Had to replace fans on 570's and 580 .. You can find replacement fans on aliexpress or amazon . With the computer off flick each fan and see if it spins freely.
ok i need help ive been struggling with this issus too not to mention the fan curve resetting as well.... so i have the fast start option set to OFF and yet when my pc start AMD Adrenalin 2020 still has the ZERO RPM ENABLED as well as my fan curve going back to 50% across the bored i am also using msi afterbuner to monitor temps and adjust my fan speeds now because this AMD adrenaline is just GARBAGE because nothing saves nothing loads if i make a save profile the fan curves they dont stay the way i want them, for example and ill display like this (temp/fancurve%) 20degrees 30% fan, 40 degrees 45% fan, 50degrees 55% fan, 60degrees 75%fan 70degrees 85% 75degrees 100% now this is reasonable setting specially for gaming, but this amd adrenaline is pissing me off now so i started using msi afterbuner again to set my fan curve speeds and then it stays upon reaching the specific temps the fan will increases or decrease but now starting my pc msi afterbuner starts with it amd adrenilne still keeps stopping the fan because this ZERO RPM IS ENABLED AGAIN!!!, its a inconvenience to turn this off every time but its what im doing for now, i have submitted issue to amd but we all know where thats going ;) if anyone has any other ideas please help.... thanks in advanced
What I have read the two software conflict with each other.. Hopefully they fix this issue. Also in adrenaline after you change to manual ,turn off zero rpm and set fan curves ect.. you said you saved your profile.. Try to push reset then you must re load your profile from the file you just saved. If you don't re load the profile it wont work. Then you have to disable windows fast start, for them to be re applied after a shutdown. Every so often a restart won't hold them. Now if you have re loaded your profile and turned off fast start.. Hopefully somebody else can jump in because I doubt the ticket will go anywhere.
@@ModItBetter yes I have read about the 2 software's conflicting one another, but I have also known that this has been a issue for a good year if not more a long with a screen flicker issue between the 2 software's.. I will try your step by step to see if that works better because I have not done it exactly to a T like you have mentioned... thanks
my situation is much worse... the fan level goes to 0 rpm every time i minimize the adrenalin control panel even though i have disabled the 0 rpm thing. dont know how to fix this
I have never seen that before you can try to do a factory reset?!! re download the software and make sure to check off factory reset. after that you will still need make a profile like in this video ect.. however it will see if it fixes your problem drive.google.com/file/d/1mjGRYooXqCqamt3AzC9lGzvyj47oU1O0/view?usp=sharing
also after you install the newest software you might be missing the Zero rpm option .. its basically they same steps .. drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing
i have other problem i try this but here is a thing there is no amp program at startup i try your reset thing and it kinda work if i dont game for more then 2/3h or if i dont play games like total war warhammer 2 becose in that case it just turn of after 2/3 min even in menu
yes in the same section of tuning.. Make your changes then .. click on add a game profile. ..then select your game. ... I don't think you have to save the profile after.its just automatic applied once you start the game..
i have a much worse problem... i used my ROG Strix Vega 64 for about 2 years now and since today my fans stopped working properly. i did everything you can imagine to solve this problem. i can play about 5 minutes till my Card gets to about 85 degrees and then gets slower because of safety settings. i am using the version 20.9.1. please help!
I have this video on video fans pretty bad video but it can possibly fix your issue czcams.com/video/8yUagJHY8GU/video.html i would also check out the cost on fan replacement..
the best thing to do is give your fans a flick and see how easy they move.. ..I'm Assuming you fallowed the video and turned off zero rpm or made a custom fan profile ect...
Hi! I would appriciate your help! I have a Radeon 540X Mobile GPU in my Asus Vivobook 15 and in AMD 2020 latest driver there is no option for Zero RPM, basicly it's not appearing, and also anytime I watched the rpm, it was 0. Maybe my GPU Fan cannot be controlled?!?!
Well a tad more looking into I am probably wrong. I did find this for asus www.asus.com/supportonly/GPUTweak%20II/HelpDesk_Download/ you might be able to tweak it with that software but i don't know if that software costs money??!!!..
1. so it might be 3rd party software conflicting . did you install afterburner or anything like that? 2. You didn't disable zero rpm or put it in manual mode.. However you should still see the temp and rpm.. . 3. one fan could be broken however that usually only effects what it shows for rpm.. 4. Your video card does not support fan tuning . 5. Might want to try to re install amd drivers but make sure to set to factory defaults in the first steps of the install.. Look in my description for link to a picture showing how to do a factory reset
@@ModItBetter Thanks for replying it still shows 0 rpm but my framerate isn't being affected so i think my fans are working correctly its just that the value isn't being shown for some reason on amd software or msi afterburner plus the temps of my gpu is nothing alarming. But I'm not sure why i can't tune my fans since it was possible before ,but its not a big deal since my frames are back to normal. Thanks again for the input. Edit: I did think msi afterburner could be causing some issues so i reseted my pc but it was still the same.
Hi do you have 2 fans? or just one.. are they both spinning ? Do they or it spin at power up.? It could be your fans or fan is just dead.. I had to replace and fix my rx580 fans couple of times. If you have 2 fans . The one that has the pwm monitor might be showing zero rpm. give your fan or fans a spin with your finger and see how good they spin while its turned off.. And then again I have no Idea what your problem is because you didn't elaborate on it.
yeah even if you turned off fast start it will still do that time to time.. i have never seen it happen on a full shut down and restart though.. My pc is another room so i don't even hear the fans not going . I find out the hard way with my game crashing basically or when i shut down my computer the bios keeps the cpu fan going for another 10 mins.
Hi have you tried to Re install Adrenalin from amd web site. And during the install do a fresh install not saving any settings. option You might have to un install it as well then try to install the package from Amd.
this video shows how to save it , in case you don't know. Also you don't have to watch it all the same spot you save is where you load your profile from .... czcams.com/video/Q0Ks5Szc0Ic/video.html you should only have to save your profile and then load your profile once.. if you disable fast start it should then load your profile on its own.
I have the opposite issue...my card runs at 980 rpm at idle and cant make it to run at 0 rpm...in fact i have no control over the fan.Card is an MSI 5700xt gaming X.
what is your temperature at idle? Your card has a feature called "zero frozr" and fans will not spin at all bellow 60c.. I don't have your card but looking at google . with the msi app you might have to click on silent mode? maybe its conflicting with Andrenalin ? However if your above 60c your fans might spin regardless..
Well I can't really find a 100 percent answer . I find lots of questions "should i disable "zero frozr" but no pictures on how to do it. .It could be yours is disabled . .. Well if you figure it out can you please post back how..
I have a similar problem, my card runs at around 2500 rpm at idle and any change I make is ignored by the card. So zero rpm does not work, but neither does the fan profile. I also have the MSI 5700 xt gaming x. Hope we can find a fix soon.
My fans spin but it will still show up as zero rpm on the software and on msi afterburner. I’m running the newest drivers but it still won’t show the speed even if my fans are spinning
Not sure.. i can only suggest couple things.. what card do you have is it possible the fans can not be adjusted ? In Adrenalin.. for tuning the fan, Max it all out, safe your profile then reload it. .. and see if the fans go max. .. Then do it the other way . .lower them all and fallow the same steps. And see if your fans behave differently with adjusting them. AFter you have saved it and reloaded them you should be able to simply push apply after adjusting the fans each time. here are my settings for the fan. drive.google.com/open?id=1yfkfIA87hxPdu9rVEsEeot3w6yRgOvtX You can try to set it up like that making sure they are all close to the half way mark or even put them all to the top. Save your profile and then load profile You can Also try Uninstall msi after burner. Go to amd site and re download Adrenalin.. re install Adrenalin .. but during the setup pick optional options Something like that .. then put a check mark in reset factory settings. You can try that as well without un installing afterburner .. Are both of your fans moving. ? at the same speed? If one fan has failed or failing it can give the wrong rpm numbers.
ModItBetter I am running an XFX Rx580 8gb edition. It might be one of the fans not running correctly but I dont know if this is a reason. When it starts to get hot around the 85 to 90 degree mark the fan on the right stops running and the fan on the left makes an awful fan scraping noise but this is very rare and only happens if I run games above my monitors ability or if it gets too hot. I don’t know if I should return my graphics card because it is brand new or if I need to reinstall drivers but what would you recommend?
ModItBetter Just tested again and I think I might have discovered the culprit. Under complete speed the right fan will not move at all and the left one still will. But when lowering the speed the right one begins to spin again
@@Chloeburlile_1 I would re turn it if you can... However if you have the same xfx as i did. and can pop up the fans(held with clips 1:41 of the video link i will give bellow) try to switch them around. before i got my 5700 i made a video on the xfx fixing the fan. . czcams.com/video/8yUagJHY8GU/video.html You can usually tell if something is up with your fans if you can flick the fan and it does not make 2-3 turns ..its probably bad. could even be a wire inside resting against it if you don't have the same fans as i do.
should note.... scrapping sounds is BAD.. so if you can't figure that out .. I would return it. its either the fan is out of grease or its scraping something.. or if you have pets full of hair
i made a post about it awhile back should still hold true.. @ModItBetter 2 years ago (edited) If your missing Zero Rpm , Try this drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing If you are missing the zero rpm , When its on automatic its enabled . If you set it to manual and set the fan curve ect.. then its disabled.
Could be conflicting with other software .afterburner ect.... ..Did you follow the steps and make a new profile and save the profile, then reload the profile? .. Are you sure both fans are actually working. properly ? ..........
@@qadirali9666 The only thing i can see then if both fans are working fine. is it conflicting with 3rd party software .. being any software that came with the card besides Amd Adrenalin. You can try to un install any other software. Then try to re install Adrenalin but make sure to do factory reset and also use the recommended version. windows 10 64bit link here www.amd.com/en/support/graphics/radeon-500-series/radeon-rx-500-series/radeon-rx-570 factory reset picture here. drive.google.com/file/d/1mjGRYooXqCqamt3AzC9lGzvyj47oU1O0/view?usp=sharing you will still need to disable zero rpm and make a profile,save it ... load it.. if you don't see zero rpm option simply set it to manual and make your profile ,save it .. load it...
hi i am at work right now so cant really help to much.. bjt in the mean time. look at my description for factory reset when you download the software again.. also you can check out my other video that shows the steps of needed to go to tunning
So if you just leave it be you can play games no problem? Its only when you make a fan curve like in the video ? Or does it just randomly shuts off on you all the time during a game? On my 5700xt i have to down clock the Max frequency to 1800 . ever since the change I have not crashed once.(b4 the change at least twice a day it was crashing) You might want to try that. its on the left side bottom where you want to adjust it,in the fan tuning section. try to bring it to its lowest and try to see if it still crashes. If it does not crash then keep bringing it up until you find a good spot for it. It might be possible your power supply is going or does not have enough current for your demands as well. Or it can be the fans are so faulty that its causing a huge current spike and causing the the power supply to reset or the motherboard.. so I don't have 100 percent fix for ya , only some suggestions
Not sure why you don't have it .. You may have to download again from amd and do a re install but choose additional options at the start of the install and do a factory reset install .. Not 100 percent sure on either of the names lol.. but its basically at the start of the install
actually i just finally made a picture of this because I suggest this so often and get the names wrong.. drive.google.com/file/d/1mjGRYooXqCqamt3AzC9lGzvyj47oU1O0/view?usp=sharing
If your missing Zero Rpm , Try this drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing If you are missing the zero rpm , When its on automatic its enabled . If you set it to manual and set the fan curve ect.. then its disabled.
@@ognovapov that is up to you. Here are my 5700xt settings well the picture drive.google.com/open?id=1yfkfIA87hxPdu9rVEsEeot3w6yRgOvtX so what you will want to do is move the last 2 around. the last circle is for max fan at around 57. .. the rest is basically idle i have mine at 31c at 1800 rpm if you find that too loud then you can move them up and down pushing apply each time. until you find the fan speed and temperature your happy with when at idle . Now for when you have max fans that is also up to you i like mine around 57-60 to kick into high fan. but you might like it more at 70c + or lower..
Now I'm pretty sure they have removed it .. it is on by default. so if you go to Automatic it should be enabled. Or push reset and it should go back to automatic and be enabled. If you go to manual and create a curve then its off.
Here are my 5700xt fan settings. anything bellow almost the half way mark for pwm the fans wont spin drive.google.com/open?id=1yfkfIA87hxPdu9rVEsEeot3w6yRgOvtX
@@josaichao4783 .. hi I just checked one of my systems with the 570 in it.. If you set the settings your self and turn off zero rpm I can get 715rpm keeping it at 24c at idle.. What is the temperature of your gpu when its at 2135rpm? and are you at idle? I should note zero rpm was enabled on that pc and it was only sitting at 38c with 0 rpm fan movement at idle. If its 2135rpm while playing games then that is probably not bad at all.
Here are the settings I set on the 570 ..Just because it works for me does not mean it will for you , It depends what you have going on in the background even at idle, drive.google.com/open?id=1GzvFOkWoim6qn3rS1luwWL8JQHHiMLCb
If your missing Zero Rpm , Try this drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing
If you are missing the zero rpm , When its on automatic its enabled . If you set it to manual and set the fan curve ect.. then its disabled.
Link to a picture showing how to do a factory reset.
drive.google.com/file/d/1mjGRYooXqCqamt3AzC9lGzvyj47oU1O0/view?usp=sharing
I get tons of request to see this picture .. If somebody is having issues seeing this picture can you please leave a message here . I'm not sure if google drive has changed something in the past 5 months thats not letting people see my files..
Thank you so much! i was getting sick of having to manually start them every time!
your welcome , glad you found the video useful and thanks for taking time to leave a success comment.. However every once in awhile if you do a restart instead of a shutdown the settings wont be activated . It has happen about 3-4 times since making this video..
@@ModItBetter I thought windows restart was better than just shutdown if you want to restart settings, err im confused/.
@@CatabductionsAnoym yeah that is probably the problem a restart will clear everything up .. where a shut down can be sorta thought of just unplugging the thing ..In theory its suppose to close everything properly but it may not clear all the temp files ect.. So i figure the restart is clearing something for amd, forcing us to reload the profile regardless of windows fast start disabled.
thank u so much brother❤️greetings from INDIA🇮🇳
Greetings from Canada.! ..Thanks for leaving a positive comment..
ModItBetter most welcome brother. have already subscribed ur channel . carry on ur informative and useful tutorials. God bless. take care.
Thank you, for helping with this. i been having this issue for sometime but i couldnt figure out for the life of me to get it fixed. thank u for this! you are a blessing :3
And thank you for taking time to leave a comment..
Since making this video.. I have seen twice now that the settings were not applied during a startup of my computer. So 8 out of 10 times it has worked.. I still do a quick check to see if my fans are at 0 rpm .. It is still better then before where it would never be applied.
When it not applied, what did you do to apply it? Restarting the pc?
Mine work for now, but it's good to know if that happened
@@dhanarsantika Hi, At 2:53 I show how to save your profile.. however if it does not get applied on a reset go back to that section but this time click on .. "Load profile" and choose the file you had saved.. You no longer have to push apply in the newer versions your fans will kick in instant..
Thanks for the disable fast boot tip. I want my video card fans to spin all the time, down to a minimum of about 35% at low temp. However, every time I powered down my system when I started it again my XFX RX580 video card would revert to zero rpm fan speed even though adrenalin reported that zero rpm was disabled. After disabling fast boot it works the way I want. Now I don't have to go into adrenalin and turn zero rpm on then off again to get the fans to spin every time I power it up. I didn't time it but it seems to make no difference in start up times with fast boot disabled either, so it's definitely a win win. I'll almost certainly need to clean my video card more often but I'll happily pay that price to keep my video card temp in the high 20C range when I'm not doing anything graphic intensive.
Totally agree, Just keep in mind if you go into sleep ,software installation force restart or just a restart , I've had it not re apply them . Maybe about 4 times since making this video. For my system its obvious my games get extremely messed up. Thanks for taking time to leave a success comment as well.
thanks, i phisically removed the pwm wire as my fans were 0 rpm at high temperature because i couldnt find a solution earlier
your welcome .. for the past year or so i've been using one of those usb temp displays just glued it on top of my monitor so i can always know my Temps and if the fans are working or not.. Saved me about twice now..
That seems to have fixed it for me. Thanks!
Thanks for taking time to leave a success comment..
Hey thanks for this. I have an RX 480 that was ignoring my custom fan curves and ramping up to full speed at low temps. I thought it was a driver or card issue but disabling Fast Start has fixed it. 🙏❤️🙏
Thanks for taking time to leave a success comment..
Thx again, now im one of ur subscribers!
your welcome and thanks as well. One last thing, Because this isn't A 100% permanent fix, Still keep a listen for your fan.. If you shut down your computer then power it back on this should work, However with some software install restarts or just a restart in general , 1 out of say 10 restarts your zero rpm will be re enable and you will have to go back and load your profile.
thank you i hope you are ok nowdays
your welcome.. .And I'm doing fine.. every week I come up with a idea to make a video.. time just slips away from too much 9-5 work..
oh thank so much disable fastboot on powerplan it work
your welcome and thanks for taking time leaving a success comment..
my rx480 was running at 58-60temp without even gaming after i did this it dropped to 39 thanks !!
now it stays at 34-35 :P
cool .. glad it worked out for you.. and thanks for taking time to leave a success comment..
@@ModItBetter np i thank you for this tutorial
Hi, I already disabled fast startup but zero rpm still activates even when I just restart the pc. Is there something else I can do?
did you make a profile save it then reload it? you need to also do that. However some software restarts will make it disabled again. Only a true power off and restart .. will then load your profile and with windows fast start disabled have it load up on its own. also every time you update amd software you will most likely have to make a new profile.
thanks...it helped
thanks time leaving a success comment.. glad this video is still helping people..
you have to do this on each game Profile. i found out if you start a game the Fan stops again! Because each game have own profile :( its a bit work, bu tif you do it for each game it works
cool thanks for the alternative fix as well.. I would still suggest turning off windows fast start as it works almost 100 percent of the time.. however adding your work around would probably guaranty you won't have zero rpm during game play..
Hi great guide! I still have issues with zero rpm, however my fans still run. Do you think its a wiring issue or I have to clean install the gpu drivers again? (Using a 6900xt)
are you trying to have zero rpm enabled so your fans don't actually spin? If so it could very well be your gpu is just running hot and the fans will spin no matter what. You can try to do the gpu drivers again and choose factory reset during install to see if it fixes your issue. On my system I had to disable windows update drivers as it was installing older drivers on me that would conflict with amd current drivers and software but that was 6 months ago, not sure if windows fixed that issue.
Worked 4me. Ty man.
cool thanks for taking time to leave a success comment..
Hi sir will you please make a complete video on quad copter using pixhwk 2.4.8 and with fly sky i6 transmitter and receiver and how to programe it and some autanamous modes like rtl and its height adjustment geo tagging etc please help me with this sir
Hi i did make a complete step by step of the pixhawk here
czcams.com/video/_yl4VaZnpMI/video.html
the flysky i show here with the settings and mission planner settings
you can still treat the i6 receiver as the cx20 receiver its the same wiring minus the 2 gimbal wires if you don't do the firmware updgrade on the i6
czcams.com/video/Vyt2d8rXkws/video.html
Here is the video i show how to upgrade your transmitter.
in the video i show a arduino but you can use any cheap ftdi and in the description i show a cable you can buy that you just plug into the back of your transmitter and program it quickly that way. then you can use ppm and use your variables for other things. as the pixhawk /apm use channel 5 and 6 combined for the flight modes
czcams.com/video/o-gEJ_U3GDI/video.html
but you will need to get the i6b receiver to take advantage of this firmware upgrade
i do have 2 videos on the subject of droidplanner.
here is one but these are my older video's and only one audio channel is working so if you hear nothing in the video it means your right speaker is not working.
czcams.com/video/aq1ToE4B4FQ/video.html
if i were to make one solid video of everything it would be a 2 to 3 hour video
i love u bro
=) thanks...
The issues I've had are the opposite - ZERORPM engages at start up everytime - which never turns on the fans - I would like AMD to give us an option to permanently disable it - Will try turning off fast start to see if that helps - but this is now the 2nd 6900XT with the same issue
Hi ya its annoying its what all 3 videos i made are about, how it enables zerorpm and over heats the gpu until basically the system crashes or glitches lots , .. Making a profile like i explain will help, but has to be re loaded usually every time you turn on your pc. If you disable windows fast start then its very rare you have to re enable it.
You still have to make a profile ,save it and re load it for the first time.
You will also have to make a new profile for every update that comes out as well usually and every amd software crash that forces a re install .
@@ModItBetter My contact at AMD turned me onto this video after 3 months trying to figure out what the root cause was, we covered everything, until Fast start issue was brought up - so I appreciate you taking it to youtube. Well done
@@MrChrisHiebert thanks.. and hopefully you get your cards temp stable now..
I've tried this and nothing. My card is a Sapphire Pulse Rx590. even when I disable 0 rpm the fans still won't work for me no matter how hot the GPU gets. It's cause the system to shutdown twice now.
do your fans spin easy if you to flick them with your finger?
This is my first and last time buying a amd gpu
yeah i feel ya, doing this and having to run my gpu max frequency at 1800mhz instead of 1900mhz other wise my computer just crashes randomly every couple of hours or less. I mean both are not a huge hits, but still should not have to be done. However it might be more the board partners then amd them selves.?!
@@ModItBetter could be. But i had a 1070ti for few years and i have never experienced any problems what so ever so i decided to upgrade and i saw the benchmarks of the rx 5700xt and i liked them so i ordered my rx 5700xt and it arrived last week and holy cr@p this mf has a lot of problems the fan speed weren't the only problem i had I've been experiencing game crashes, blue screen of death randomly comes up while gaming, gpu overheating and more crashes and errors.. amd really need to work on their drivers.
@@fredrickalexander271 yeah if u getting random blue screens .. i was as well .. change the frequency to 1800mhz instead of 1900mhz or lower ..have not crashed since I have done that.. on my 5700xt
my rpm keeps at 0 even after disabling 0 rpm and even after changing the curve, what do i do?
you can see if one of your fans is not spinning right.. Only one fan controls the pwm read out for the software. I once had a wire resting on one fan.
Max out the curve as well just to see if your fans go max.
You can try to re install the drivers with a factor reset during driver install .
I might have that picture in my description.
Hello, man, why is that? 0 rpm is still coming out of me. I was able to play the FPS game a while ago and then it suddenly shut down after the non-rotating fan of my gpu. I hope you can answer :( My GPU is Radeon RX 570.
Hi .. You need to make a profile and save the profile.. Then load load the profile.. After that disable windows fast start. After updates and random reboots. it might still go back to zero rpm. Load your saved profile again..
So if that is not your problem ,It could be one of your fans has stopped working or needs to be cleaned out. I Had to replace fans on 570's and 580 .. You can find replacement fans on aliexpress or amazon .
With the computer off flick each fan and see if it spins freely.
ok i need help ive been struggling with this issus too not to mention the fan curve resetting as well....
so i have the fast start option set to OFF and yet when my pc start AMD Adrenalin 2020 still has the ZERO RPM ENABLED as well as my fan curve going back to 50% across the bored i am also using msi afterbuner to monitor temps and adjust my fan speeds now because this AMD adrenaline is just GARBAGE because nothing saves nothing loads if i make a save profile the fan curves they dont stay the way i want them, for example and ill display like this (temp/fancurve%) 20degrees 30% fan, 40 degrees 45% fan, 50degrees 55% fan, 60degrees 75%fan 70degrees 85% 75degrees 100% now this is reasonable setting specially for gaming, but this amd adrenaline is pissing me off now so i started using msi afterbuner again to set my fan curve speeds and then it stays upon reaching the specific temps the fan will increases or decrease but now starting my pc msi afterbuner starts with it amd adrenilne still keeps stopping the fan because this ZERO RPM IS ENABLED AGAIN!!!, its a inconvenience to turn this off every time but its what im doing for now, i have submitted issue to amd but we all know where thats going ;) if anyone has any other ideas please help.... thanks in advanced
What I have read the two software conflict with each other.. Hopefully they fix this issue.
Also in adrenaline after you change to manual ,turn off zero rpm and set fan curves ect.. you said you saved your profile.. Try to push reset then you must re load your profile from the file you just saved. If you don't re load the profile it wont work. Then you have to disable windows fast start, for them to be re applied after a shutdown. Every so often a restart won't hold them. Now if you have re loaded your profile and turned off fast start.. Hopefully somebody else can jump in because I doubt the ticket will go anywhere.
@@ModItBetter yes I have read about the 2 software's conflicting one another, but I have also known that this has been a issue for a good year if not more a long with a screen flicker issue between the 2 software's.. I will try your step by step to see if that works better because I have not done it exactly to a T like you have mentioned... thanks
my situation is much worse... the fan level goes to 0 rpm every time i minimize the adrenalin control panel even though i have disabled the 0 rpm thing. dont know how to fix this
I have never seen that before you can try to do a factory reset?!! re download the software and make sure to check off factory reset. after that you will still need make a profile like in this video ect.. however it will see if it fixes your problem
drive.google.com/file/d/1mjGRYooXqCqamt3AzC9lGzvyj47oU1O0/view?usp=sharing
also after you install the newest software you might be missing the Zero rpm option .. its basically they same steps ..
drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing
i have other problem i try this but here is a thing there is no amp program at startup i try your reset thing and it kinda work if i dont game for more then 2/3h or if i dont play games like total war warhammer 2 becose in that case it just turn of after 2/3 min even in menu
maybe try re install fresh install don't save your settings .. then after its done fallow steps again
Help pls i dont see 0 rpm even with recommended version 😔
hi try this is if it looks the same.
drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing
can we set the graphic card to auto load our custom tunning profile when we trigger certain apps/game?
yes in the same section of tuning.. Make your changes then .. click on add a game profile. ..then select your game. ... I don't think you have to save the profile after.its just automatic applied once you start the game..
i have a much worse problem... i used my ROG Strix Vega 64 for about 2 years now and since today my fans stopped working properly. i did everything you can imagine to solve this problem. i can play about 5 minutes till my Card gets to about 85 degrees and then gets slower because of safety settings. i am using the version 20.9.1. please help!
I have this video on video fans pretty bad video but it can possibly fix your issue czcams.com/video/8yUagJHY8GU/video.html i would also check out the cost on fan replacement..
the best thing to do is give your fans a flick and see how easy they move.. ..I'm Assuming you fallowed the video and turned off zero rpm or made a custom fan profile ect...
It does work when turning off and on the PC, but not when I put the PC to sleep :_
good to know!!.. Same with restarts sometimes it does not stick.
Hi! I would appriciate your help! I have a Radeon 540X Mobile GPU in my Asus Vivobook 15 and in AMD 2020 latest driver there is no option for Zero RPM, basicly it's not appearing, and also anytime I watched the rpm, it was 0. Maybe my GPU Fan cannot be controlled?!?!
Hi its very possible you have to go into the laptop bios during boot up. It may limit the fan for battery savings ect..
Well a tad more looking into I am probably wrong. I did find this for
asus www.asus.com/supportonly/GPUTweak%20II/HelpDesk_Download/
you might be able to tweak it with that software but i don't know if that software costs money??!!!..
I can't adjust my fan curve it's just a red block saying 0%/°C.
ouch.. just seen this.. Hopefully you got it working. ? not even sure i can help you .. can only suggest a few things ..
1. so it might be 3rd party software conflicting .
did you install afterburner or anything like that?
2. You didn't disable zero rpm or put it in manual mode.. However you should still see the temp and rpm..
.
3. one fan could be broken however that usually only effects what it shows for rpm..
4. Your video card does not support fan tuning .
5. Might want to try to re install amd drivers but make sure to set to factory defaults in the first steps of the install..
Look in my description for link to a picture showing how to do a factory reset
@@ModItBetter Thanks for replying it still shows 0 rpm but my framerate isn't being affected so i think my fans are working correctly its just that the value isn't being shown for some reason on amd software or msi afterburner plus the temps of my gpu is nothing alarming. But I'm not sure why i can't tune my fans since it was possible before ,but its not a big deal since my frames are back to normal. Thanks again for the input.
Edit: I did think msi afterburner could be causing some issues so i reseted my pc but it was still the same.
this setup didn't fix my problem. I have an RX550. Even doing every single step.
Hi do you have 2 fans? or just one.. are they both spinning ? Do they or it spin at power up.?
It could be your fans or fan is just dead.. I had to replace and fix my rx580 fans couple of times.
If you have 2 fans . The one that has the pwm monitor might be showing zero rpm.
give your fan or fans a spin with your finger and see how good they spin while its turned off..
And then again I have no Idea what your problem is because you didn't elaborate on it.
my problem is that it goes into zero rpm every once a while and i dont notice it sometimes
yeah even if you turned off fast start it will still do that time to time.. i have never seen it happen on a full shut down and restart though.. My pc is another room so i don't even hear the fans not going . I find out the hard way with my game crashing basically or when i shut down my computer the bios keeps the cpu fan going for another 10 mins.
with that if it was more of a issue for me we could install 3rd party app to alarm off on certain temps..
if your card has dual bios switch, set it to performance bios. it prevents Wattman software from disabling the fans.
there is no option of tuning
only metrix and advisors
Please help
Hi have you tried to Re install Adrenalin from amd web site. And during the install do a fresh install not saving any settings. option
You might have to un install it as well then try to install the package from Amd.
When i restart to make sure it works it does but one problem. The fan setting are not mine and are random but the zero rpm is fixed
try to save your profile ..after you make the changes . then load your profile.
this video shows how to save it , in case you don't know. Also you don't have to watch it all the same spot you save is where you load your profile from .... czcams.com/video/Q0Ks5Szc0Ic/video.html you should only have to save your profile and then load your profile once.. if you disable fast start it should then load your profile on its own.
I have the opposite issue...my card runs at 980 rpm at idle and cant make it to run at 0 rpm...in fact i have no control over the fan.Card is an MSI 5700xt gaming X.
what is your temperature at idle? Your card has a feature called "zero frozr" and fans will not spin at all bellow 60c.. I don't have your card but looking at google . with the msi app you might have to click on silent mode? maybe its conflicting with Andrenalin ?
However if your above 60c your fans might spin regardless..
Well I can't really find a 100 percent answer . I find lots of questions "should i disable "zero frozr" but no pictures on how to do it. .It could be yours is disabled . .. Well if you figure it out can you please post back how..
I have a similar problem, my card runs at around 2500 rpm at idle and any change I make is ignored by the card. So zero rpm does not work, but neither does the fan profile. I also have the MSI 5700 xt gaming x. Hope we can find a fix soon.
@@JuliusVanMil for kicks try saving your profile after you change the fan settings .. then re load the fan settings
@@ModItBetter thanks for the suggestion, but sadly this did not work. It does report 0 rpm, but still the fans on my gpu are spinning quite fast
My fans spin but it will still show up as zero rpm on the software and on msi afterburner. I’m running the newest drivers but it still won’t show the speed even if my fans are spinning
Not sure.. i can only suggest couple things..
what card do you have is it possible the fans can not be adjusted ?
In Adrenalin.. for tuning the fan, Max it all out, safe your profile then reload it.
.. and see if the fans go max. .. Then do it the other way . .lower them all and fallow the same steps. And see if your fans behave differently with adjusting them. AFter you have saved it and reloaded them you should be able to simply push apply after adjusting the fans each time.
here are my settings for the fan.
drive.google.com/open?id=1yfkfIA87hxPdu9rVEsEeot3w6yRgOvtX
You can try to set it up like that making sure they are all close to the half way mark or even put them all to the top. Save your profile and then load profile
You can Also try
Uninstall msi after burner. Go to amd site and re download Adrenalin.. re install Adrenalin .. but during the setup pick optional options Something like that .. then put a check mark in reset factory settings. You can try that as well without un installing afterburner ..
Are both of your fans moving. ? at the same speed? If one fan has failed or failing it can give the wrong rpm numbers.
ModItBetter I am running an XFX Rx580 8gb edition. It might be one of the fans not running correctly but I dont know if this is a reason. When it starts to get hot around the 85 to 90 degree mark the fan on the right stops running and the fan on the left makes an awful fan scraping noise but this is very rare and only happens if I run games above my monitors ability or if it gets too hot. I don’t know if I should return my graphics card because it is brand new or if I need to reinstall drivers but what would you recommend?
ModItBetter Just tested again and I think I might have discovered the culprit. Under complete speed the right fan will not move at all and the left one still will. But when lowering the speed the right one begins to spin again
@@Chloeburlile_1 I would re turn it if you can... However if you have the same xfx as i did. and can pop up the fans(held with clips 1:41 of the video link i will give bellow) try to switch them around.
before i got my 5700 i made a video on the xfx fixing the fan. .
czcams.com/video/8yUagJHY8GU/video.html
You can usually tell if something is up with your fans if you can flick the fan and it does not make 2-3 turns ..its probably bad. could even be a wire inside resting against it if you don't have the same fans as i do.
should note.... scrapping sounds is BAD.. so if you can't figure that out .. I would return it. its either the fan is out of grease or its scraping something.. or if you have pets full of hair
I have no zero rpm mode in tuning. Please someone help me.
i made a post about it awhile back should still hold true..
@ModItBetter
2 years ago (edited)
If your missing Zero Rpm , Try this drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing
If you are missing the zero rpm , When its on automatic its enabled . If you set it to manual and set the fan curve ect.. then its disabled.
My rx 570 fans are working but it's showing as on amd software as 0 rpm's ? How to fix ?
Could be conflicting with other software .afterburner ect....
..Did you follow the steps and make a new profile and save the profile, then reload the profile?
.. Are you sure both fans are actually working. properly ?
..........
@@ModItBetter yes both fans are spinning and cooling temperatures are moderate
@@qadirali9666 The only thing i can see then if both fans are working fine.
is it conflicting with 3rd party software .. being any software that came with the card besides Amd Adrenalin.
You can try to un install any other software.
Then try to re install Adrenalin but make sure to do factory reset and also use the recommended version. windows 10 64bit link here
www.amd.com/en/support/graphics/radeon-500-series/radeon-rx-500-series/radeon-rx-570
factory reset picture here.
drive.google.com/file/d/1mjGRYooXqCqamt3AzC9lGzvyj47oU1O0/view?usp=sharing
you will still need to disable zero rpm and make a profile,save it ... load it..
if you don't see zero rpm option simply set it to manual and make your profile ,save it .. load it...
@@ModItBetter thanks very much for your help I'll try it and see what happens
I cannot find tuning in my adranalin and software, please help
hi i am at work right now so cant really help to much.. bjt in the mean time. look at my description for factory reset when you download the software again.. also you can check out my other video that shows the steps of needed to go to tunning
@@ModItBetter okayy
I can’t see the zero rpm button
Try this drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing
My computer shuts off once I turn on the fans and boot a game anyone know why?
So if you just leave it be you can play games no problem? Its only when you make a fan curve like in the video ? Or does it just randomly shuts off on you all the time during a game?
On my 5700xt i have to down clock the Max frequency to 1800 . ever since the change I have not crashed once.(b4 the change at least twice a day it was crashing)
You might want to try that.
its on the left side bottom where you want to adjust it,in the fan tuning section. try to bring it to its lowest and try to see if it still crashes. If it does not crash then keep bringing it up until you find a good spot for it.
It might be possible your power supply is going or does not have enough current for your demands as well.
Or it can be the fans are so faulty that its causing a huge current spike and causing the the power supply to reset or the motherboard..
so I don't have 100 percent fix for ya , only some suggestions
I dont have tunning optionnn what do i dooooooo😰
hi did you do 2:02 ? You have to enable advance control however you have to disable zero rpm first. I didn't make that clear in any of my video's
@@ModItBetter i dont have that neither 😭
Not sure why you don't have it .. You may have to download again from amd and do a re install but choose additional options at the start of the install and do a factory reset install .. Not 100 percent sure on either of the names lol.. but its basically at the start of the install
@@ModItBetter okay thanks for a advice....
actually i just finally made a picture of this because I suggest this so often and get the names wrong..
drive.google.com/file/d/1mjGRYooXqCqamt3AzC9lGzvyj47oU1O0/view?usp=sharing
I cant find tuning option under performance...
do you have the down arrow at 2:36?
@@ModItBetter there is no tuning options..
When I click Fan Tuning enabled, I don't get the Zero RPM option. Can someone help me please
If your missing Zero Rpm , Try this drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing
If you are missing the zero rpm , When its on automatic its enabled . If you set it to manual and set the fan curve ect.. then its disabled.
Also how do I know what settings to put when I tune it?
@@ognovapov that is up to you. Here are my 5700xt settings
well the picture drive.google.com/open?id=1yfkfIA87hxPdu9rVEsEeot3w6yRgOvtX
so what you will want to do is move the last 2 around. the last circle is for max fan at around 57. .. the rest is basically idle i have mine at 31c at 1800 rpm if you find that too loud then you can move them up and down pushing apply each time. until you find the fan speed and temperature your happy with when at idle . Now for when you have max fans that is also up to you i like mine around 57-60 to kick into high fan. but you might like it more at 70c + or lower..
@@ModItBetter Thanks im going to give this a try and let you know.
@@ModItBetter yeah I legit did everything you said still no option.. srry to bother
Zero rpm doesn't show for me help please!
Hi try this.
drive.google.com/file/d/1sCPwh84Rs3wizSUZuMEiPInvsyV-7JbA/view?usp=sharing
Now I'm pretty sure they have removed it .. it is on by default.
so if you go to Automatic it should be enabled.
Or push reset and it should go back to automatic and be enabled.
If you go to manual and create a curve then its off.
@@ModItBetter thank you
Here are my 5700xt fan settings. anything bellow almost the half way mark for pwm
the fans wont spin
drive.google.com/open?id=1yfkfIA87hxPdu9rVEsEeot3w6yRgOvtX
2135 rpm fan speed normal or not sir ?
msi rx570 armor 8gb oc
@@josaichao4783 .. hi I just checked one of my systems with the 570 in it.. If you set the settings your self and turn off zero rpm I can get 715rpm keeping it at 24c at idle..
What is the temperature of your gpu when its at 2135rpm?
and are you at idle?
I should note zero rpm was enabled on that pc and it was only sitting at
38c with 0 rpm fan movement at idle.
If its 2135rpm while playing games then that is probably not bad at all.
Here are the settings I set on the 570 ..Just because it works for me does not mean it will for you , It depends what you have going on in the background even at idle,
drive.google.com/open?id=1GzvFOkWoim6qn3rS1luwWL8JQHHiMLCb
ok sir thankyou
how to download watman for rx570 sir
Does this work on 20.2.2 ?
HI .. it should work on all of them... I'm currently on version 20.3.1 and still working
Its so stupid amd has kept this trash setting
agreed ..
3:00
the start of my video says to skip to 3:00 but really its 3:05