I have notice at minute 1.26, that the handguard are made for a 2012-2013 model and yet your bike is a 2017 and it fits very well. The introduction of the ABS must have not change the handlebar set up. Thank you my friend for your detailed video. It dissipated the doubt in ordering them for my NC 2017.
Thanks for the video - I've bought a fair number of Givi products in 40 years of motorcycling and unfortunately did not watch the video beforehand. These are the worst instructions for any motorcycle accessory I've ever bought, and rank with the worst instructions I've seen for any product. The assembly is overly complicated and at the end, the handguards seem to be just waiting to fail. I love the NC700/750 for what it is.
I bought the HP1111 for my Honda NC750X (2018) and the Givi screen. After installing the HP1111, the distance between the edge of the protector and the screen is not the same on both sides. is that normal ?
Boas! Comprei a mesma mota há pouco tempo e estava a pensar comprar esses mesmos handguards. Também vivo em Inglaterra portanto as condições climatéricas são semelhantes, a minha questão é, valem a pena as 70 ou 80 libras que custam? Isso abafa msm o vento nas mãos? Btw, o vídeo está excelente. Obrigado, Hélder
Hélder Antunes boas Helder! Antes de mais parabens na tua nova mota! Em relacao aos handguards, eu como os instalei no verao, no inverno como ando com luvas, não sinto assim grande diferenca. Tenho de usar os punhos aquecidos na mesma... mas no verao sinto que abafa um bocadinho.. não te posso dizer que ajuda a cortar o frio, mas corta um bocado o vento.. mas só pelo “look” que da a mota , para mim já valeu a compra... obrigado pela subscrição! Já agora es de onde aqui em inglaterra? Junta te ao nosso grupo no facebook chamado nc750x owners group!!! Abracoo!!
Olá Tuga. Podes tirar umas duvidas? A minha moto é uma NC750X ABS de 2017. Estou a instalar esse kit e não sei se o suporte M é do lado esquerdo ou direito da moto. Outra duvida, parece no video que não retiras completamente o espelho do lado esquerdo, é mesmo assim. O suporte da handguard é para ficar entre os fixadores do espelho?
Am I missing something On the right hand side you unscrewed the wing mirror complete with the adaptor. On the left hand side clutch side you only unscrewed the mirror it's self leaving the adaptor in place . Is that correct ? . As I have the same bike as you and I'm going to fit some hand guards .
yeah, if you mean on the mirror part, in fact i didnt do the job properly. in minute 6:21 i should've have removed both nuts and not only one. On minute 2:35 i did the job correctly. I have been delaying to fix this... So both look the same. Problem with this is that one of the mirror's rubber thingy that covers the 2 nuts, doesnt go all the way down to cover them... hope i answered your question...
Tuga em Bristol That's nice of you to reply . Apart from that hiccup . That was a very detailed video , especially laying out the components in order of assembly . good camera angle as well . Job well done .
put today D1146ST with this handguards. when i turn handlebar left or right the handguarв rest to the new windscreen (( i think to cut a piece of windscreen and may be a little of handlebar. there is no another solition. fucking disapoint of Givi.
Tuga em Bristol do the heated grips need to be adapted in any way so that the vivid can be added? Basically, do the Oxford heated grips cause any problems?
@@TugaemBristol these wind/hand guards plus winter gloves do fine in the southwest U.S. desert in the middle of winter, at night/very early morning even. I'm sure English winters have a bit more bite though.
Thank you for this video, I didn’t even need to look at the instructions when installing them on my bike.
Thanks
I agree "great detail and close-ups". One of the most instructive videos I've seen.
Hasse Honda750 thank you for your feedback
Good stuff, love how organised you are laying everything out first. 👍🏻
Thanks Dervman! :)
I have notice at minute 1.26, that the handguard are made for a 2012-2013 model and yet your bike is a 2017 and it fits very well. The introduction of the ABS must have not change the handlebar set up. Thank you my friend for your detailed video. It dissipated the doubt in ordering them for my NC 2017.
Claude Boulet they fit very well. They are made for manual and dct models
Well done. Nice and clear and to the point.
Thanks fir taking the effort to produce this for us.
Honda NC750X Stuff with pleasure 👍🏼👍🏼
Hey look, a famous guy!
Great video thank you I’m buying the 2018/9 model so hopefully the instructions should be the same except mine is dct model
Thanks bud
Excellent!
Useful, well done video / getting these for my NC
Thanks for the video - I've bought a fair number of Givi products in 40 years of motorcycling and unfortunately did not watch the video beforehand. These are the worst instructions for any motorcycle accessory I've ever bought, and rank with the worst instructions I've seen for any product. The assembly is overly complicated and at the end, the handguards seem to be just waiting to fail. I love the NC700/750 for what it is.
You have to stop drinking then mate
Buen video, ya se como hacerlo, gracias y buenas rutas desde Argentina.
Cristian Luis A gracias amigo!
Great video, very useful and informative... but the music! Distracting and annoying, had to mute it.
Sorry about the music 😅
Was a big help, thx a lot!
me lo guardo para poner los míos cuando lleguen. buen vídeo tutorial
+Javier Meseguer muchas gracias :)
esta fixe,muito explicativo.parabéns.
borda de água grande Vitor! Obrigado amigo! Ficou um bocado mal editado mas pronto.. vou aprendendo c os erros xD
thanks for this! super helpful to have an instructional video to help save hundred pounds or so on garage installation. :)
FELIX BAUER-SCHICHTEGROLL thanks bud! Rly appreciate it
Thank you,
Thank you sir!
Welcome :))
Thanks for the video. Great help....👍🏻
Nicely done. Thank you.
I bought the HP1111 for my Honda NC750X (2018) and the Givi screen. After installing the HP1111, the distance between the edge of the protector and the screen is not the same on both sides. is that normal ?
Dirk Seifert I would tell you but I have the stock windscreen
Thanks
great help
Thank you Peter! Really appreciate it!
Did you buy the 3 lock washers inserted on the screw before installing the metal cap at the end of the handlebar? What mm size were they?
these ones are all provided with the new handguards
Muy didáctico el video
cabra poroto gracias 👍🏼
Bom video. Pergunto se já colocas-te alguma base no descanso lateral?
Mario Saraiva nop.. só pus o central
Boas!
Comprei a mesma mota há pouco tempo e estava a pensar comprar esses mesmos handguards. Também vivo em Inglaterra portanto as condições climatéricas são semelhantes, a minha questão é, valem a pena as 70 ou 80 libras que custam? Isso abafa msm o vento nas mãos? Btw, o vídeo está excelente.
Obrigado, Hélder
Hélder Antunes boas Helder! Antes de mais parabens na tua nova mota! Em relacao aos handguards, eu como os instalei no verao, no inverno como ando com luvas, não sinto assim grande diferenca. Tenho de usar os punhos aquecidos na mesma... mas no verao sinto que abafa um bocadinho.. não te posso dizer que ajuda a cortar o frio, mas corta um bocado o vento.. mas só pelo “look” que da a mota , para mim já valeu a compra... obrigado pela subscrição! Já agora es de onde aqui em inglaterra? Junta te ao nosso grupo no facebook chamado nc750x owners group!!! Abracoo!!
Olá Tuga. Podes tirar umas duvidas? A minha moto é uma NC750X ABS de 2017.
Estou a instalar esse kit e não sei se o suporte M é do lado esquerdo ou direito da moto. Outra duvida, parece no video que não retiras completamente o espelho do lado esquerdo, é mesmo assim. O suporte da handguard é para ficar entre os fixadores do espelho?
Am I missing something
On the right hand side you unscrewed the wing mirror complete with the adaptor.
On the left hand side clutch side you only unscrewed the mirror it's self leaving the adaptor in place .
Is that correct ? .
As I have the same bike as you and I'm going to fit some hand guards .
yeah, if you mean on the mirror part, in fact i didnt do the job properly. in minute 6:21 i should've have removed both nuts and not only one. On minute 2:35 i did the job correctly. I have been delaying to fix this... So both look the same. Problem with this is that one of the mirror's rubber thingy that covers the 2 nuts, doesnt go all the way down to cover them... hope i answered your question...
Tuga em Bristol
That's nice of you to reply .
Apart from that hiccup .
That was a very detailed video , especially laying out the components in order of assembly . good camera angle as well .
Job well done .
Thanks bud! :)
Informative video just a shame about the awful screeching music but that can be turned down.
Steve Westwater hahahah
Can be used with the GIVI D1146ST windshield? Do not hit him?
put today D1146ST with this handguards. when i turn handlebar left or right the handguarв rest to the new windscreen (( i think to cut a piece of windscreen and may be a little of handlebar. there is no another solition. fucking disapoint of Givi.
Will these fit a Honda Forza 125 - 2018 model
be careful - the soundtrack can kill ya.
Those are Oxford heated grips in the video?
Graeme Dunn yes
Tuga em Bristol do the heated grips need to be adapted in any way so that the vivid can be added? Basically, do the Oxford heated grips cause any problems?
Graeme Dunn i didnt install them. And they havent given me any problems yet
the awful music is an error, please go back to narration, as you did so excellently in the previous video
I’m getting a set of these for my street triple. I wonder how effective vs bare winter gloves you found them?
It doesn't protect you from the cold that for sure
@@TugaemBristol these wind/hand guards plus winter gloves do fine in the southwest U.S. desert in the middle of winter, at night/very early morning even. I'm sure English winters have a bit more bite though.
@@martuuk8964 yes, im commuting to work, and early mornings, with heated grips, i stil get my fingers a bit cold :(
Will these fit on the heated grips too?
This video was made with heated grips
@@tugainbristolgaming thank you
I can't get the screws out of the bar end weights 😡
Baron Von Barm well i had no problems unscrewing them... maybe they are very tight?
El vídeo muy bien, el producto givi muy malo para el precio que tiene.
Yo Javier es verdad! No real protection, and they charge a lot of money for a piece of plastic
Yo Javier thank you for your compliment :)
Pity about the shit music