How To Fix Tacoma Fender Flares | Cheap And Easy!
Vložit
- čas přidán 25. 08. 2024
- In this video I go over how to fix fender flares on my 2nd gen Tacoma!
- PLASTIC CLIPS - amzn.to/3z3Wa3f
- SCREWS - amzn.to/4c1da8T
REMOVAL TOOL(s) amzn.to/4bRlVCh
DISCLOSURE: "As an Amazon Associate, I earn from qualifying purchases." I am a big fan of Amazon and the convenience of shopping for all these items linked above, and I want to provide you, the audience, with a one-tap solution when looking for these products. While I strive to offer accurate information, it's important to note that due to factors outside of OutdoorTacos' control, viewers must use their discretion and judgment when implementing the information provided in the video. Thank you! - Jak na to + styl
I find it easier to put the clips into the flare first. Match it up with the old clips while it’s still on the fender. Take out the old clips. Then push the flare on with the new clips already attached to it.
Thank you for sharing! I’ll remember this method for next time!
Thanks for this information and taking the time to post this video. Much appreciated.
Thank you! I’m glad I could help!
Beautiful. I was replacing the fender flare on a Toyota Tacoma, 2002 today.
Awesome! I’m glad I could help, thank you for watching and commenting!
Thanks, getting ready to tackle left front coming off after vacation trip..
Sweet! Hope all goes well!🤘
Thx. I have a front one damaged from someone denting the Taco just in front of the door. I would take a bit of extra time to clean the inside of the flare as well, since its off.
Cuzz of yr video I was able to fix mine thanks so much ❤
Thank you! I’m glad I could help!
Thanks brother. It was helpful.
Glad I could help! Thanks for watching!
Thank you much!
Glad I could help! Thanks for tuning in!
SUPER GLUE WORKS!!!
While you were there, you should have sprayed some fluid film or PB Blaster Rust shield in those holes, because that is where the rust starts inside the fender.
I’ll have to do that, good call! Thank you for the info and tuning in!
@@OutdoorTaco I'm doing it, that is why I am watching your video. Thank you for the effort!
The underside of the fenders are corrosion magnets. I have a 2002 4Runner and the flares are all loose. I might just leave them off and fill the holes with fiberglass.
Do you need two different colors of clips?
I’ve linked the package for these clips, the different colors are to differentiate which clips go where; as the size of the holes on the truck are slightly different. Hope this helps!
Great video. Where did you get your new clips?
Thank you! Just Amazon: OTUAYAUTO 50PCS Fender Flare Clips - Molding Retainer Clips Replacement for Toyota 4Runner, FJ Cruiser, Highlander, RAV4, Tacoma - Push Door Trim Fastener - Replace OEM: 75495-35010 75397-35010 a.co/d/0uaVbh3
If I like how it looks better without the fenders but I don’t want the fender holes what should I do?
Great question! A suggestion from the TacomaWorld forum suggests using epoxy, Bondo or some other plastic filler.
I've personally never used Bondo or plastic fillers to plug up holes but from what I've seen it seems like an easy DIY solution. Let me know how it goes!
Toyota truck fender flair removal!
Might it have been easier to drill the old clips out?
Dude you like scratching panels
It’ll buff out😉😂