How Power plant Safe shutdown carried out
Vložit
- čas přidán 20. 08. 2024
- How Power plant Safe shutdown carried out
SADC control
Boiler windbox DP
• Actions after Boiler t...
• Boiler follow mode in ...
• Hydrogen (H2) filling ...
• How Boiler PA Fan & FD...
/ @kpatelbla
SADC control & Flame stability
SADC modulating
• Stalling of Primary ai...
• Boiler follow mode in ...
@Power Plant discussion
@Power Plant guide
Planned shutdown safety
Safety during shutdown
Power Plant practical knowledge
• How much air needs for...
-HUrFuRJ1Hd
• Boiler SADC control in...
Power Plant technical pratyush
/ @kpatelbla
@PowerPlantDiscussion
बहुत अच्छा गुरू जी प्रणाम 🙏🙏
Great explanation..... thank you sir
Could you please make a video on the display board of DC,SG,AGC,AG/SG,instantaneous,Average frequency etc.... which is displaying on a screen(about all the things displaying on the screen) in control rooms of power plants.
It is helpful to lots of people
Sir, Shutdown ke time me BCP kab start karenge....
For which unit asking about means 660 MW or 600 MW, for both it is different?
660 MW
During shutdown when wet mode activated and levelling vessel level showing more than 4500mm.
Could you please tell me about
mechanical over speed trip at 112% of 3000rpm means 3360rpm
Electrical overspeed trip at 110% of 3000rpm means at 3300rpm
It is given because of safety it over speed of turbine occurred so first Electrical over speed occurred by means of remote trip solonoid of governing system if it fails to operate the final one is mechanical over speed by means of spring force which extend the fly bolt outward by centrifugal force consequently hit the pawl and drain Aux trip oil of mechanical trip device.
Could you please tell me that why spiral water walls are used in super critical boiler(from bottom ring header to intermediate header)
It is provided to enhance flow and avoid film boiling.