PCM SWAP, Used PCM, No need to program IF..How to replace a Chrysler Jeep Dodge PCM replacement
Vložit
- čas přidán 11. 05. 2019
- Please NOTE: The buck of my time in the comment section is spent on comments and questions from SUBSCRIBERS, If you not subscribed, or leave off the question asking are you subscribed, I have to get to those questions after im done with all the subscribers questions. Please understand, this very important. Also guys/gals, if you need to get in contact with me ASAP concerning info or help, please use the CashApp $20 donate feature to $JohnnieRayThomas. Simply donate and a message will come to my phone and I can get in contact with you ASAP, thanks. Or simply leave your comment or question in the comment section. Thanks for viewing an Online Mechanic Tips video with JT the Car Guy. As always ask any questions you may have but please consider subscribing to the channel because I speak about a lot more. Please use the donate links to my Paypal or my Cash App if you wish to donate and help support the Channel. This also sends a direct message to my cell phone alerting me of assistant needed quickly, which means I can get back to you quickly. Thanks.
If this video in any way helped you save time and money, please consider donating.
Paypal Donate Link here: www.paypal.me/OnlineMechanicT...
Cash App here: $JohnnieRayThomas
#JTtheCarGuy
#PCMSwap
#PTCruiser - Auta a dopravní prostředky
PLEASE NOTE: The PCM off of the car you getting part from has to match your cars PCM. Not the last 2 letters but the part number
Please help me make more videos by DONATING to the CHANNEL here: www.paypal.me/OnlineMechanicTips?locale.x=en_US
Oil Consumption LIVE STREAM DISCUSSION here: czcams.com/video/mzdC2n_Hfwg/video.html
Online Mechanic Tips will my 2002 jeep grand Cherokee run without the pcm? see basically my SKIM module broke- wires are fucked. can I just unhook everything and drive for now like bypass the security b.s..please help...THANKS
@@mhowe1243 Dang, im just seeing this..No, thats not possible
What do you mean?
I never change PCM . I just change instrument cluster had a lock smith try program the key to it still did not start . Claims cause is PCM . Will truck started with old cluster in it. So if old started it its not the PCM I would say. Makes no scents to me. 2003 f150 5.4 Who does that type of work ?
yes I would subscribe if get right answers . lol
heading to upull it, will this work on Ford?
ok long story, new engine used replaced engine,kept old pcm.
pulled 4.0 out put in a 3.0
now need 3.0 PCM, what do i look for VIN ON engine?
U have another subscriber bro. I love people who help other people. Is a simple gesture that's speaks volumes of ones character.
I've been waiting fFIVE YEARS for this video! Thanks man
Thanks for watching. please thumbs up the video and subscribe to the channel, thanks
JT speaking the truth. Helping others out is the way to go. You’re a good man brother. 👍
Thanks for watching bud
This is genius. Inspection would be the next issue because of the different VIN but at least you can move the car around. Awesome tip
use a scan tool and re-write your vin to it.
Thanks for helping us people that don't have a boat load of money to fix our crappy cars, and I subbed your channel, Thanks
Thanks bud. I really appreciate it.
Thank you very much for the info and tips!! That's how you keep it real with everyone out there!! The struggle doesn't have to be a thing if we help each other out!!
JT, thanks again!!! after 4 years, your video is still helping people!!!
Very informative! This video helped me troubleshoot and repair my Grand Caravan without taking it to a shop. Thank you for sharing!
well thanks for watching. Please remember to thumbs up the video and consider subscribing to the channel, thanks
Love this guy Quick and to the point
Way better than most youtubers them guys take 40 min to explain the same shit he does in 5 ...I like this guy right here.no bullshit perfect explinations !
Man I ain't Neva lied. People act like is the viewer wants to see them for 45 minutes just to get some solid information. When I start CZcamsing imma get straight to the facts and the MEAT and POTATOES of the video and get on out of there. Get more views that way.
Thanks for info i went to the junk yard yesterday and got them all replaced them and car started right up just fine.
Great my friend. Please give the video a thumbs up and subscribe to the channel for me, thanks
Did you get the ignition retumbled or did you tape new key near the column and use your own original key ?
@@talknheadz I always just rekey my cylinder with the correct tumblers but most people tape the chip nearby
@@OnlineMechanicTipsis retumbling something i can do or let my key man do it? And whats the price range?
@@talknheadz I got the new tumbler with the key from the junk yard
you got a new sub from me nobody else i have seen on youtube has gave this info thanks man!!!
Just found your channel and am hooked after 1st video I am hooked and a subscriber! I love how you help others. We need more like you in this world!
Thanks
Great tip man. You earned a subscriber. Great personality as well.
Thanks for the sub!
Bro for real thank u. Been working on it. Been trying to figure it out for the last six months. Seen your video and I got my car started again thank you very much.
Hope this works for my 05 dodge magnum just got 3 things he said.
Some good info J.T., just getting caught up on some of your older videos. Will make a note of this video for future reference!
Thanks Unk
Hello, could you tell me where I can buy the pcm that is sold with the paralyzer and the key? Thank you
Your amazing man you have no idea my pt cruiser has been down due to hooking up the fan wires backwards or something else like that idk but it fried my car and this just helped me out
You can take the junkyard key and module and tape the key in the circle and plug it in the connector under column cover and it will read the key while using your existing key for ignition. The module reads a pellet in the key through the ring on the module.
Yes you can, great points
Could you explain a but better? Pellet??
I got a 98 Chrysler Concorde and it's not a chipped key. So I don't have to worry about the key right
@@Chimi1993 Each key has a small coil in a capsule molded into the top of the key. A transducer coil around the key hole reads this capsule when it is held in its proximity.
Thank you for info very cool idea
And the sad thing - without changing the VIN number, you will not be able to program any other keys due to not having the PIN number for the used computer.
I think it's much better to pay someone to do a "VIN number change" to the replacement PCM using a good scan tool. That way you can use your original keys, can program new keys and don't have to carry 1 set of keys to get into the door and another to turn on the ignition. This won't work with the newer Chrysler products.
Hahaha cleaver man usually we go this route, dodge has mad things so hard for independent shop to program stuff now!
Okay so I have a used I see you for my 04 E46 but I still need to get Flash to my ews in VIN number how do I go about doing that
I ordered a pcm or ecu with key fob for toyota hilux (australian version) 3.4 litre 5vzfe engine. Does that model of toyota have a skim? Is it a body control module? Any reply appreciatted???? Cheers frpm Australia! Great info btw!
So do the immobilizer get plugged into the steering column with key attached? or just have all 3 connected to pcm? And plug pcm up as regular?
Just came across this video and was about try this tomorrow before I watched the video. Was unsure if it would work, 2000 Ford ranger, do u think it will work? I believe the Vin is no big deal on this vehicle but I can't confirm that.
Thanks brother right now having promblems with. Computers reprogramming ect. Thanks for ur help
You welcome, please sub, and click notification.. More to come
Yes & also the ignition lock cylinder for that key. Done it many of times. I
Good information brotha
Hey I might have a tough question for you. Got an 06 PT cruiser computer went bad so trying to cheapen at the junkyard and had it reflash to match the vehicle. Joe better than the day we got it. Next day on the way to get it inspected, it broke down on the highway. Found another engine put it in and now we can't get it to spark. Do you think the computer needs to be reflashed after only one day of it being used, even though it's been a couple of months since it happened?
I have a 2007 5.7 commander. The security system shut me down one day . I took a pcm and the key and skim ring out of truck with a 5.7. The key is now taped to the skim ring and is tucked under dash . This allowed me to keep using my original key and ignition.
ding ding ding.. I like the way you think bud..Thanks for watching. Please thumbs up the video and subscribe to the channel, thanks
Also thank you for responding so quickly will definitely watch more of your content
Thanks my guy
If the part numbers don't match can u get it program to work or is do the have to match
I need help. I have a 2006 pt cruiser for some reason most of the time my scan tool will not communicate with it but when it does these are the codes I get p1604 p0700 p0613 p0882. So far this is what I've done to try and fix it replaced tipm with use one from junkyard out of a 2008 pt cruiser with same accessories visual inspection of wire harness cleaned ground connections on the inner fender. Any pointers would be greatly appreciated
Hello my friend, you are in the right video area for such a problem. Looks like the controller internally shorted..The controller on a 2006 model PT usually 4606440AE right? Is that P1604 code active on your scan tool?.. O and please like the video and SUBSCRIBE to the channel with your answer, thanks
I have a 2006 Chrysler 300C 5.7 liter. I got a new engine installed. My key battery dead so I manually entered the car. The car wouldn’t crank. I put a batter in the key and everything worked fine. The next day halfway through the day the car wouldn’t start. Battery, alternator and starter all good. Will this process help and is my car lock bu the anti-theft system? I just spent 4k plus and can’t even crank it.
Good to know, thanks jt👍like applied
One step ahead of you but you are the ONLY one to explain this option to newbees. It does work because i did it.. more than once! You talk too much but very true and accurate information feom JT Cruiser!
Hey man! Great video , I recently had the same issue with my 05 Chrysler 300, I got three those items and my car is running the best it’s ever been ! Thanks to you and this video 👍 I happened to have a parts car lol!!
lol, thats whats up
I have 2011 Town and Country one day the car wouldn't turned on at first thought it was battery, so I bought new battery then it happens again, so I thought it was alternator so after my second new battery i think its the PCM that controls the alternator to turn on and off it looks like the ground from the field wires is not grounding in the PCM when I put wire directly to negative on batter it seems to make a circuit but the meter doesn't say its charging still reads what the battery is 12.5 v. Two Questions can I install voltage regulator kit to bypass the PCM. or if I put direct hot and ground to the field wires behind Alternator would this make the alternator start to charge again?
You really know your stuff! I ordered a plug and play PCU from model mechanics of Colorado. I’ve got a 1996 Nissan Quest. I hope it works out. I’ll let you all know how it goes.
Did it work?
@@MyLifeThai371 No, not at all. What a sham!
@@carlorocky What did you end up having to do to get your vehicle running?
Will this work for a 2007 Pontiac g6?
I saw people selling "skim delete" modules. Would that work as well?
Very nice explanation 👌 thanks bro
Thanks for the great info man.
Thanks for watching Jim.
Hi ive had it with my 4.0 zj ecu i would like to fit a dictator aftermarket management kit cause ive just had it with pcm issues every year with my jeep.please advise
Does the Jeep Wrangler JK 2017 need to have the cluster, skim module, and the key to match, or just the key and skim module? Thanks.
Hey bud, this year model more complicated than that. It runs off of a different bus network
I have a 97 Town & country runs good pcm is bad. I have a 99 Town & country PCM rebuilt and reflashed recently body and transmission are shot. Will the 99 pcm swap into the 97 and be happy with 99 skim module? Both have security 97 has 2 buttons for seat and mirror position. 99 dont have mirror and seat memory.
Where did u get the part from
You also need the ignition cylinder right ? I have to try this outlet Because the " remanufactured " pcms are unreliable
I just joined your ship. Love the video thank you for the info I'll be watching thank you, thank you
Thanks for tuning in Bobby
I need a pcm or bcm for my 04 Dodge Durango so how much would that cost because they don’t make that part no more at Chrysler dodge?
Excellent tip. Thanks.
Well thanks for watching bud, please thumbs up the video and subscribe to the channel, thanks
Will it come with the key cylinder as well if not how will the key work in mine
I have a 06 Dodge Charger rt. I keep getting codes when I fix all the problems, I was told it can be my PCM is there a way to fix that without going to the dealer?
So far I didn’t but the PCM reset itself after multiple times of me resetting the codes and nomore codes are there
Thank you sir I am one of those people who can afford to see the dealer or by new parts
Thank you for the video learning how this all works going to do a 4.7 to 5.7 swap on an 03 dodge ram
In inspection state u will need to program the pcm iam doing this same thing today I do have a dbr3 anyhow I count program the used skim
Hello my friend thanks for watching..I do not understand you statement..O and please like the video and subscribe to the channel for me, thanks
Morning thanks for tip,now i know why can't program my pcm on 2011 Equinox,bought used one on ebay,no key,etc tried everything i found internet,but original works but after 20 minutes or so shuts,any tips are welcome ,thanks again bud.Bruce.
Thank you so much buddy thank you for this video🙏
I have 02 Jeep Grand Cherokee if I get all 3 from 04 Jeep Grand Cherokee will this work?
Hey JT, I just subscribed to your channel and I was trying to figure out what is wrong with my 2006 dodge charger RT 5.7 L. It turns over but won’t start and I have a code 0 100 loss of communication to ECMPCM can I use a launch Scan tool to fix the problem?
Well its going to be hard to use any scan tool if you have no communication with the computer (ECM?PCM) But there are things you need to find out, like why it will not start. Such as if its out of gas or not getting gas, or even getting spark for that matter. The easiest thing to do is spray some carb cleaner down the trootle body and see if it starts
I have a nineteen ninety-eight work style Chrysler van does it have that setup and don't have no alarm system
Thank you JT!!!!!
Will this work with a car that has push start?
In an 01 Dodge ram 1500 5.9L v8 magnum that doesn’t have a skim module or safety stuff would just using the pcm work?
What color is your key? Also are you subscribed to the channel?
do you think this also work in ford escapes
I saw another one of your other videos I have the jeep grand Cherokee that won’t turn off just did a motor an trans swap same year same everything now car say not in park ( but it is ) also trunk won’t work it tell me tailgate disabled soon as I hook the battery up I put a fresh battery in it still nothing
You can tape the key close to the key hole. I've used my non chip key that way.
Yep, works er time
I change my instrument cluster will not engine will not run . Lock smith tells me its PCM . Yet truck will start with old 1 . Is lock smith could he be right ?
Maybe, but the cluster you installed may not be plug and play. What year is the truck? Also are you subscribed to the channel?
I recently bought a Chrysler 300c 05 from someone and when i go to check the pcm numbers, the whole thing is scratched off and i have to replace the pcm, where do i go from there if i need to know the numbers of it
Do you have a scan tool, some will display the part number? Also are you subscribed to the channel?
Good video thank you for sharing
Thanks for watching
Great vid. Thank You Much ✨
Valuable video!
Great video thanks
Thanks for your expertise
hey man your awesome. quick question, 2007 dodge caravan getting ground at pcm ecu but no power to components its at auction won't crank. any ideas? im thinking of buying for a friend thats in need.
Hey bud, all the power thats supplied to the PCM are protected by fuses. And im not sure what you mean by no power to components. Also are you subscribed to the channel?
@@OnlineMechanicTips it was in report from meineke the info I dont know If I win it I will give you more details I think I subscribed let me make surem
It I can't find a ECU that's have the same serial number what's the next option
What about a 2008 Saturn Vue ex 3.5 v6?
I changed out the pcm on 02 durango same p/n number and it starts and drives but it's tried a code that it didn't have before.. not sure if I should take further steps or not.. and im bout to subscribe on g/p cause all comments are speaking highly of you.. this is my FIRST subscribe... lol..
what if my vehicle has no skimmer? own a 96 Dodge Grand Caravan.
Just wondering if I can just go to the junkyard and pull and replace?
Sure, its just plug and play at that point. Thanks for watching, are you subscribed to the channel?
So in my understanding the body control module does not need to be programmed to the new pcm or skim module?
It all depends on the year and the bus network on the car my friend. What year is the car? Also are you subscribed to the channel?
Thank man much appreciated
Thanks for watching, please thumbs up the video and sub the channel, thanks
I have done this with jeep Cherokees computer was close in years numbers didn't match both had security had key and skim computer from donor jeep taped key inside skim put it under dash done great
Yep, thats another a
way around spending big bucks
Great video, thanks
Thanks for watching. Please thumbs up the video and subscribe to the channel thanks.
You can get a tuner to remove the vats some don't charge much
Hey jt brother please please is there anyway that i can talk to you about the pcm and my charger i built the car from scratch cam torque converter tune but i need to ask u im in a fucked up situation and need you advice please i need you help please let me explain to you whats going on
would this work on a 2014 ram promster 2500 3.6
One and an answer question I did what you said but the PCM Security scan and key come off a Dodge My car is a compass JeepSame here same functions power seats no power windows yes everything was the same besides it was Chrysler instead of a Jeep The only thing I had a question on is now everything is working besides my starter took it out works fine put it back in does the same it will not crankNot sure what's going onIf you could share something with me to be helpful I'd appreciate it thank you have a good day
So if I have a PT can I use a Pacifica or Jeep or dodge pcm like if it’s about the same year
No
A little more work but more bang for your buck
I have a ford e150 ford van its doesn't have the anti theft key, can I just get a used pcm and not have to program it.
You left out the year my friend..the newer Fords this will not work..Please like the video and subscribe to the channel for me, thanks
Hey where are you located at? I’m having trouble programming the ecm to my truck like it won’t crank but it does has light everywhere.
How on earth are you trying to do this. Did you buy a new PCM that has no software in it? Also are you subscribed to the channel?
What do you use to program these dodge PCMs? I'd like to buy something.
If you go this route wouldn't the VIN be whatever the VIN was on the vehicle you got the PCM from?
Another cheap.. Or actually free way to go about this with a used PCM is by opening up both modules and swapping out the EEPROM chip (soldering your old EEPROM in place of the EEPROM on the circuit board inside the PCM you're planning on installing). If you aren't sure which chip is EEPROM try googling "your car make, model EEPROM", or eeprom location..it'll be an 8 legged chip BTW, no matter the vehicle. If you're unfamiliar with soldering & desoldering you shld def practice on a circuit board from an old broken TV, phone, anything really. If people get a replacement ECM from a pull your part store its unlikely they'll be able to get keys & in that case switching chips would still be an option. Also there's no reprogramming needed when going this route since VIN, immobilizer, etc is all saved in this chip.
great point but not sure your average mechanic can do all that.
I have personally done this before on a Nissan Sentra, and I can confirm that it works perfectly-even with completely different years. Just make sure to correctly identify the right chip and use heat protective tape to mask the surrounding electronics on the circuit board.
Love you r work
Thanks bud
This is good however I believe some vehicle still need the Vin programmed to the instrument cluster, ABS and maybe some other modules. You may get error codes for mismatch. Either way great idea!!
Yes, it all depends on the year of the vehicle. Out of the question for the newer cars.
Got an 04 sxt Neon w bent frame, got a 05 regular Neon. Swapped computer, key and skim module. Still no start. Complains about no battery temp sensor (not present on this model - 05) and says bad evap. Replaced w 04 evap and still complains "no evap". Maybe inst. cluster swap? I got both cars but not the 05 computer.
Does this work with other modules? I need to change a tcm but I don't have the equipment to program.
Depend on the year. What kind of car is this and year? Also are you subscribed to the channel?
JT I have a 2008 PT Cruiser convertible. My battery went dead (separate and different problem). I replaced the battery and now my traction control light is on. I scanned OBI and I get code 2202 it says VIN doesn't match ABM. I didn't change module or PCM. Just battery. My scanner will not reprogram. Any tips? Thank you. I used your tip about sticky horn and it worked perfectly
This car has a TIPM. Can your scan tool read into the TIPM? You may have to do a vehicle reconfiguration bud
I will have to check. Thank you
I just did exactly this!
How about a ECU DO I JUST NEED key model
What do i need the car key and skim module for ? or however its spelled.
Because they work together. Are you subscribed to the channel?