E119 Easy way how to clean copper
Vložit
- čas přidán 4. 09. 2024
- Still Works and Brew is showing easy way how to clean your copper
Paste cleaner:
1/4 cup flour
1/4 cup salt
enough vinegar to make a paste
551 cleaner:
500 ml. water
50 ml. hydrogen peroxide
1 oz. citric acid
water salt vinegar solution:
3 cup water
1 cup vinegar
1 table spoon salt
#stillworksandbrewing
Talk about whistle while you work it must be paradise outside your work shop those birds sound amazing
It is! cheers
Skip all this. Unless you just like to waste time. Get some muratic acid and apply to a cloth (wear gloves and a mask) and wipe the copper to factory finish in seconds. 🎉🎉 cheers.
cheers
Hey Randy. Got another recipe for ya. 6 lbs black cherries, 6 lbs rainier cherries, 1 gal of black cherry juice, and enough sugar to bring it to 1.080. Champagne yeast works well.
oh it's a 6 gal batch. lol
sounds good thanks
Have been a 551 man for a while now, but good to know about some other formulas. Thanks for the extra info..
I feel that the Citric acid alone is just as good as 551🤔
Any time! cheers!!
Thanks for sharing your formulas to clean copper. I subbed to you. Thanks for sharing.😎😎⛏⛏🔥🔥
Hey, thank you for the video. This video was exactly what I was looking for 😊👍👍
Glad it was helpful!
Thanks for all these recipes.. i just washed my bubble plates in a vinegar salt baking soda.. man they cam out like almost new.. just in case you wanna try
Thank you for the tutorial. Excellent information.
You bet!
Thank-you so much for the video it was extremely easy to follow and helpful
Glad it was helpful!
I also use 551! it does work the best!
It works great cheers!!
I use the vinegar and salt and water to clean my bubble plates I use a little more salt but it works great for me
The blue/green is that not an oxidation layer, called patina, who protects the copper? Last week I was at my local drugstore and she said that citric acid is less aggresive then vinegar. Ciric acid is oderless, you always smells vinegar and you have to rinse a lot.
Preferably use distilled water and not tap water. In distilled spirits there are no acids and minerals that affect or discolor the metals. After using the acid solution you would neutralize the copper. Put the copper in a water bath with a high PH solution, sodium bicarbonate or calcium carbonate is perfect. But I think, this is a little bit overkill.
Most important. Always rinse with water and dry well.
Thanks for the info
The solution is blue because it now contains copper, I wonder if long term use would make the mesh break down…
good question
Why would it if you rinse it
Randy, Another good copper cleaning agent for the EXTERIOR of columns or parrots....
Plane old table KETCHUP ... Rub on, wait, wipe off, rinse clean with wudder. ;)
Cheers Buddy!
Hey BigEdsGuns I think wudder is the trick Cheers my Friend
It's gotta be the vinegar in the ketchup that does it
@@stillworksandbrewingyes sir clean my copper bottom pots with ketchup😉👍
I'm Jim@@chanceberg832
Fantastic video. Thank you. Very much appreciated.
Nice video. Think you can spray it on a bay window roof?
Happy Easter. Nice video, papa
thanks so much
Suggestions on sealing the raw copper?
EXCELLENT! Thank You!
You are welcome!
Thanks. I needed this!
I'm not here to disrespect this video but if you want to clean copper you need ( tarn-x ) two wipes and clean and you can even pour it back in bottle if you using it and it's dirty looking after cleaning. I use tarn-x inside and out side my parrot mainly and wow it cleans in seconds. Wipe clean rinse and reuse 👍👍👍
to each their own cheers
@@stillworksandbrewing very right but if you didn't know it's useful information and definitely a big game changer
Nice! Subscribed!
Awesome, thank you!
I’ll bring my copper to you! Thanks!
no problem Cheers!!
Thank you. 🏆✌️
You bet!
I was wondering. . . is it necessary to really use water at all in the 551? What would happen if you just used the other ingredients and not the water?
I use 551 for everything!
Cheers!!
Basically vinegar cleans copper. 👍
You could say that
You ok randy, what happened to your hand? hope all is well and keep up.the good work
All good had tested thanks for asking Cheers!!
@@stillworksandbrewing Looks like ringworm... Get treatment dude!!
It is circlegranuloma doc said take about 2 years to go away
Off-topic... look up home remedies for ringworm it looks like you got a bad case of it on your hand. It's a fungus and it's highly contagious
thanks for caring but went to Doctor was tested it is Circle Granuloma hope I spelled that right he did say it takes about 2 years to go away cheers
That paste sounds like sandpaper.
I'm only interested in cleaning the inside of the copper. The outside I could care less about. Thank you, Randy!
Does anyone know what percentage is vinegar?
Works great
i will have to agree
Awesome. Thanks!
You are welcome
Mix them both together and call it a day lol
Cheers!!
Thanks! What do you recommend for drying? After cleaning with vinegar, which worked perfectly, I put my copper in the oven, at aproximately 40 or 50 °C, and the copper reoxidized again
I usually just hang and air dry
Is it any way cleaning by Hydrocarbon spray
I boiled some chicken tenders in distilled water last nite, and it boiled over some. When I washed the pan, the copper was spotlessly CLEAN where that liquid was on the bottom of the copper bottom pan. WHY? And is it safe to EAT that chicken?
that's a good question
@@stillworksandbrewing , I dehydrated the meat, but sort of afraid to eat it now..as I have never seen meat do that before..
Okay, I understand how to clean copper.
However, do you have any idea of how to clean copper contacts on a bandsaw butt welder? The copper plates are used to hold the bandsaw blades in place, and then they're welded together. Simple process with a machine designed to do so.
However, it's an old machine, and now, even though the bandsaw blade is contacting the upper and lower surface on the copper, the weld is only happening on the bottom and not the top, which indicates that the copper plates need to be cleaned of years worth of carbon. There is NOTHING else that can be cleaned without addressing the electricity, and sometimes the weld works. That indicates the plates.
I have looked EVERYWHERE for how to clean the plates on the bandsaw butt welder, but find absolutely nothing.
So, as these plates seem to be able to be removed for cleaning, do you have any thoughts? Don't touch it and let a pro clean it? Simply take off the plates and clean them of all of the carbon and slag that's built up over several decades?
I volunteer at a 50+ shop. We buy band saw blades by the foot in 100 ft rolls and have to butt weld to make new blades. Cheapest way to go. Two of us supervisors, who can weld blades, tried numerous times over the course of 3 hours and the consistent problem was the upper plate. Would weld on the bottom half, but not the top. Weld failed every time, until the one time we got lucky and it welded sufficiently on both sides. Still holding.
I'm assuming the easiest fix is that the upper plates need cleaning.
Can you help?
Hello can you please tell me what strength Hydrogen Peroxide used in the 551 Solution
I use what you buy at the grocery stores
Where did you get your citric acid?
I got mine at local home brew store but you can buy it online Amazon
4:25 turn sound up!! 👊👊🤣🤣🤣🤣
Cheers my friend
Why don’t you just use lemon juice or ketchup????
you could Cheers
RANDY, NICE VID…FYI…IM FAIRLY CERTAIN U HAVE RINGWORM.
went to Doctor had biopsy it is called circle granuloma thanks for caring cheers
it is a wonder how all these solution have not resolved the skin condition, if they clean copper.😊
Can anybody answer this question… how do you remove a scratch on a copper sink without taking the oxidation out…
Maybe sand it, then let it oxidate again
I Soak all my copper parts in citric acid.
Cheers!
I have also just used citric acid/water solution
Nickel plating asside...
Try tarnex
I just hate the smell LOL Cheers
Have you tasted a run after Tarnex. It's poisonous
Just soak your copper in starsan!
Soak in star san
That’s to much work!!!
I agree the paste is
500 ml of “wudder”
That’s cause of the lemon juice
Cheers!!
No, I cannot tell the difference.
cheers
Your right hand looks like you have a case of ringworm!
Nope had checked. Cheers
How come you dont have this measured out already. Gosh. Took you 30 tries to get enough vinegar. Wasted 5 mins in the video😂
cheers
This is the complete opposite of an ASMR video. Between the sound of him breathing, and the sound of that salt scraping against the side of that container I want to stab my ears out