Buenas, mira yo tengo una yzf r125 con el 180malossi, igual que tu, hace poco me arreglaron una cosa del motor, la junta de culata se habia roto y otra tonteria mas, y al usar la moto resulta que se corta a 8 mil revoluciones, cuando suele llegar a 11 mil. No se si sabes que problema puede ser, voy a intentar configurar el power commander de malossi otra vez, pero si sabes que problema puede tener, avisame, gracias!
@@beervercammen it depends alot. if you put on a naraku with high lift cam you and right map you get something about 5 more. but as i have full maslossi but no high lift cam. i got 9 more hp so it depends on the cylinder and so on. the malossi kit is kinda expensive doe. i think i payed 600 euro for mine with the ecu. the camshaft doesnt give it so much more
hi i just installed my 180cc malossi and it wont turn on anymore. the electric start is working well and crank is rotating normally and spark plug gives spark but still worn work. help pls
@@James-by3mm yeah works perfectly well. I just had no experience back then and the cam chain was not in place on the bottom gear. Fixd it and works well
@@blazexiytb if you have yamaha wr then you need something to tune the ecu. I personally have rieju marathon so it comes with carburetor. And for camshaft there is more videos in youtube to get it right. My problem was that the camchain had fallen from the lower sprocket and the valves didnt open lol
Buenas, mira yo tengo una yzf r125 con el 180malossi, igual que tu, hace poco me arreglaron una cosa del motor, la junta de culata se habia roto y otra tonteria mas, y al usar la moto resulta que se corta a 8 mil revoluciones, cuando suele llegar a 11 mil. No se si sabes que problema puede ser, voy a intentar configurar el power commander de malossi otra vez, pero si sabes que problema puede tener, avisame, gracias!
No lo sé pero supongo que será algo de centralita
I have a question, how did you set the Force Master 2. Greetings from Germany from Viktor 👍
Yeah PRO mechanic . Fit seger ring with screwdriver. OMG WTF !!! :))) The rest of his work looks the same
Es cierto 👍 aquí somos así de apañaos
Una padada maestro
You just install 180cc kit? No new cyllinder head?
dont need to bro. the 180cc kit gives it around 5 more HP you just need a new fuel map.
@@beervercammen how do you do that?
Black Camera Media look my channel
@@beervercammen it depends alot. if you put on a naraku with high lift cam you and right map you get something about 5 more. but as i have full maslossi but no high lift cam. i got 9 more hp so it depends on the cylinder and so on. the malossi kit is kinda expensive doe. i think i payed 600 euro for mine with the ecu. the camshaft doesnt give it so much more
@@rasmusmoto7668 do you now if you can put it on a beta 125 4t because I don’t now if there are the exact same engine of not ?
How didyou set the cam timing? is there so that the cam sprocket only can be installed in one way one the camshaft?
yes.
What's the title of Piston 62?
how fast top speed after this?
Which marking is it on the crank?
The original
can these cylinsder goes with mt 125 2020?
Yes, but you need an aftermarket ECU too
i think this cylinder change on that small bike is not worth it. Just buy a bigger bike like 250cc or 300cc
License restrictions is why I'm here either rock with a 125 for another 2 years or with a faster 125
So all that i need is a ECU and the kit?
yes
hi i just installed my 180cc malossi and it wont turn on anymore. the electric start is working well and crank is rotating normally and spark plug gives spark but still worn work. help pls
Is it running or not ?
@@James-by3mm yeah works perfectly well. I just had no experience back then and the cam chain was not in place on the bottom gear. Fixd it and works well
@@pleessi5516hello I’m doing this the first time now myself, do I also need the ecu for the Malossi kit?
And how do i make the camshaft right?
@@blazexiytb if you have yamaha wr then you need something to tune the ecu. I personally have rieju marathon so it comes with carburetor. And for camshaft there is more videos in youtube to get it right. My problem was that the camchain had fallen from the lower sprocket and the valves didnt open lol
@@pleessi5516 okay, yea I have also Rieju MRT with carburetor. Yesterday my piston broke and burned all my oil
Que pasa si montas el cilindro con la centralita original?
No le vas a poder sacar el máximo potencial al cilindro