How to Replace Vintage Camera Bellows (COMPLETE GUIDE)
Vložit
- čas přidán 8. 10. 2023
- How to replace the bellows in a 1920s No. 1A Pocket Kodak.
120 to 116 film adapter on Amazon (affiliate link) amzn.to/3tpGe94
Measurements for the camera bellows for this No. 1A Pocket Kodak:
Front inner: 1-5/8 inches X 1-5/8 inches
Front outer: 1-7/8 inches X 1-7/8 inches
Rear inner: 2-9/16 inches x 4-5/16 inches
Rear outer: 2-7/8 inches x 4-11/16 inches
Max extension length: 5 inches
Min closed length: 1/4 inch
Peak-to-peak distance for the first 5 pleats from the front is 5/8 inches. Peak-to-peak distance for the sixth (6th) pleat is 9/16" and the 7th and 8th pleats are 1/2".
Some useful things with affiliate links. If you buy using my links, Amazon may pay me a little bit of money. Thanks!
Camera cleaning kit with blower amzn.to/3RXlE6E
Precision Screwdriver Set amzn.to/3TC0JtP
Vacuum pads: amzn.to/3Q8THuj
Screws (m1.6 x 6mm): amzn.to/46Kf62z
Nuts (m1.6): amzn.to/3Q8EZTX
The original bellows patent: patents.google.com/patent/US1...
Two options for new replacement bellows ( I used etone and was happy):
www.custombellows.co.uk
www.etone.com
What I use to make videos
Camera amzn.to/46YzL3o
Lens amzn.to/4659E9A
MiniHDMI to HDMI Cable amzn.to/3MtARfl
L-bracket amzn.to/3QJPAoR
Tripod with ball head amzn.to/3QIhLVd
Mic and stand amzn.to/3u7mcjm
USB Audio Interface amzn.to/3FLT3wY
USB HDMI Capture amzn.to/45Ye1Du
Video light amzn.to/3sjSEhY
Softbox amzn.to/46YtAMI
Video recording software obsproject.com/
Video editing software www.blackmagicdesign.com/prod...
I found a 120 to 116 film adapter on Amazon. Get yours here (affiliate link) amzn.to/3tpGe94
Very satisfied to watch you replace the bellows.
You did great.
Well done!
I have a Kodak pockket no. 1 , use 120 film.
The bellows needs replacement.
your video is really helpful.
Thank you for sharing.
I hope you do it. Good luck!
This is pretty cool. I have two folding Kodaks over a hundred years old. One uses roll film and the other sheet film. The bellows are in decent shape last I looked. They belonged to my grandfather.
Sweet! They're pretty amazing devices. When I have a little more free time, I have a few rolls of film to shoot with mine.
They will have got special tools in the past. Nice video, interesting to see how you overcame all difficulties…..😊!
Thanks! I’m sure they had special jigs and templates to accurately put these together in mass production. Doing it without such tools made things a little difficult.
Amazing Job!
Thank you!
Congratulations, you did a really good job.
Thank you! Cheers!
Very cool, I am repairing a 1A Autographic jr, so much fun.
Good luck! I hope you post a video and some photos when you're done! :)
Great work! I'm also trying to restore one of this.
Awesome! Good luck!
This was super cool! I have a late 20's to early 30's Kodak Vest Pocket Special that I recently bought because its so cool to look at. It seems to be in really great condition. I took the lens apart and cleaned it a bunch. The shutter and aperture both seem to work well. I think if I was to put film in it, it would actually take a picture!
The only thing I'm missing for it is that plunger stick that is held on the side of the front stanchion/lens area. I would love to find one of those to complete it.
Very cool! I hope you give it a try!
yes
inside could get a little flat black paint on the white screws, Thanks for the show and tell. Great job. do mine next?
Good idea, thanks!
I have a couple of these. A No.1 (120 film) and No.1A (116 film, needing adapters) as seen here. They both need a little work - shutter sticking and small hole bellow repairs - but I also want to reverse engineer the autographic film, to see if I can reproduce it by re-rolling film stock with carbon backing paper; early days though, but the patent has long expired :-) So, looking forward to seeing your experiences shooting with it
That's a cool idea! Hope you try it and post a video :)
Very cool. Acetone may have worked to cletoff glue.
You're right. I didn't try that.
this is really cool! I recently purchased a kodak jiffy 616, and the leather hand strap is missing. if you have any resources for historically accurate replacements, I would love to get them. i'd also need to get replacement bellows, since i can see light leaking in!
Cool! I hope my video helps with the bellows replacement. Sorry, I don't have any answers for the leather strap. If you find a source, I hope you'll comment a link for everyone! Thanks!
Eu tenho uma kodak Six 20 em perfeito estado de conservação usa filme formato 620.
Fantástico! :) Espero que você poste vídeos de suas fotografias! (obrigado Google tradutor.)
Need to know more
Thanks for watching! What else would you like to know?
i plan to repair the bellows of my kodak 3A autographic camera. i think the procedure will be the same. the only difference is the size of the bellows, as 3A is way bigger
Good luck! I hope you share the results. :)
Great job, my dad has one of these which was his fathers, it lets in light and needs a new set of bellows. I'd love to get it working again for him. I wonder if you could have tapped / threaded where the rivets were with some slightly larger screws.
It really felt good to do this. Worth the money and effort for the sense of satisfaction alone :) I considered tapping the steel standard, but it's relatively thin, and I was worried it wouldn't hold. I'd have been pretty disappointed if I'd made an irreversible change like that and it didn't work.
Thanks for the video and for sharing the measurements. Would you mind sharing how much Etone charged? This is a project I'm hoping to take on with one of my Kodak's at some point, just need to choose which one! I've got two 1A's made in Rochester, NY, one non-A model 1 (but still autographic) made in NY and one A1 made in Toronto, Canada.
It was $69 with free shipping. Good luck!
Fixed it, thank you. Yeah, the value for this is the family history for me. Once I figure in the repair, film, adapter, and developing, my first photos with it are going to be pretty expensive.
eBay has new old stock for 12$ plus modest shipping.
Interesting, I'll check it out!
Would this work on a Kodak No.A1 series 3?
I would guess it would, but I can't say for sure.
Does this also work for the no.1? (The 120 film variant) Mine has very dry bellows, wirh many pinholes and tears. Literally grazing my fingers across the bellows gets particles of it on my fingers
I haven't ever had my hands on a No. 1, but they seem to be very similar, so I expect so. My bellows were the same; shedding black dust at a touch. It was a little nerve wracking, but worth it to me. Measure carefully.
Lucky I found a document that had bellow codes for older bellows from repair shops, they seem to be in nice condition. Thanks for the advice in the video!
Update, ive taken out the bellows but I have yet to take out the rectangular peice.