Airlift Performance 3H or 3P 444C: 1 Compressor vs 2 Compressors Part 6

Sdílet
Vložit
  • čas přidán 21. 01. 2017
  • ►Subscribe to my channel for new videos, the build of my Si, vlogs and everything else that I record and share with you. :)
    Recommend
    I highly recommend that when you get the Airlift Performance kit for your car that you get 2 compressors.
    Recommend
    I also highly recommend that you get the compressor isolator kit to help with the compressor noise and vibration from the compressors
    ► Link to where you can buy the Air lift Performance kit and view the options vvv
    d2bdmotorwerks.com/i-20861067-...
    ►Compressor Isolator Kit
    www.airliftperformance.com/pr...
    ►Don't forget to leave a 'Like' and Subscribe! :)
    ►Instagram: @EvilStreetShark
    Follow me and subscribe for more updates on new content! :)
  • Auta a dopravní prostředky

Komentáře • 76

  • @z33andme71
    @z33andme71 Před 2 lety

    Thanks for the video bro! I just bought a Airlift dual compressors for my 350Z so I'm looking at different videos on some tips and the male and female connectors is a good tip so thanks!

  • @csmers3743
    @csmers3743 Před 4 lety +1

    Very informative vid.. I'm definitely waiting till Black Friday to purchase 👌🏽

    • @wpeneyra
      @wpeneyra Před 4 lety

      just picked mine up. 25% off!

  • @topendms
    @topendms Před 5 lety +4

    Great video. It helped me decide to change to a 2 compressor set-up before installation. Speed was a huge factor, my compressors now only run for a few seconds. It does however require a Secondary Compressor Wiring Harness from Air Lift.

    • @EvilStreetShark
      @EvilStreetShark  Před 5 lety

      Yes! It makes a big difference on how long the compressor runs and the second compressor wiring harness is needed.

    • @808DC2R
      @808DC2R Před rokem

      How can I get another harness I bought me a set only with one compressor now I want two do I need just change harness only how about relays and the wiring?

    • @topendms
      @topendms Před rokem +1

      @@808DC2R Air Lift Secondary Harness

    • @808DC2R
      @808DC2R Před rokem

      @@topendms thanks I go look into that does the kit come with relays and wires for the compressors

    • @topendms
      @topendms Před rokem +1

      @@808DC2R Yes

  • @a.c.jimenez8274
    @a.c.jimenez8274 Před 6 lety

    Good vid man

  • @driftingbrandonc.6480
    @driftingbrandonc.6480 Před 3 lety

    10:03. Dang it. I got the isolator kit, but didn't get the plates. Took of the "stock" isolators off and put the sprung ones on. Holes already drilled lol. Should still help isolate the noise. Just no secondary rubber soaking the vibrations.

  • @TWINS-TV-PRANKS
    @TWINS-TV-PRANKS Před 3 lety

    Well done 👏

  • @yeeyang546
    @yeeyang546 Před 6 lety +1

    What’s the cost of this system plus install? Thanks

  • @DiSk1er
    @DiSk1er Před 6 lety +1

    He’s right highly recommend 2 compressors. I’m running only 1 compressor with 2.4 gallon air tank. My compressor only last 2-3 years in daily driven.

  • @Entertainmentinc1
    @Entertainmentinc1 Před 7 lety +2

    Hey buddy whats up, You can add a water trap on each of the lines that go from the compressor to the tank and it will help reduce moisture even more. Awesome videos btw, finally you did a whole overview of this system

    • @EvilStreetShark
      @EvilStreetShark  Před 7 lety

      Yes that is true! Thanks for the tip! May do that to the other car getting bagged! ;) More videos on the way!

  • @Trap..house.
    @Trap..house. Před 4 lety

    What size tank is that?

  • @friky6271
    @friky6271 Před 8 měsíci

    you need 2 relays? or 1 relay for dual compressor?

  • @itzboomski9150
    @itzboomski9150 Před 7 lety

    Can you make a vid on showing how to set up the dual compressor harnesses?

    • @topendms
      @topendms Před 5 lety

      You have to order a Secondary Compressor Harness from Air Lift.

  • @ToastyClam
    @ToastyClam Před 5 lety

    Wow nice

  • @dubzy8334
    @dubzy8334 Před 5 lety +1

    Highly recommend a pully driven compressor. I have a 1974 vw westfailia its bagged and I couldn't stand the electric compressors. Didn't matter how good it was or how many. With the electric ones. They are loud and slow and use a ton of power. I bought an aircinditioning compressor, from extreme zone and it has been modified to co press aor instead of freon. Tou have to grease it a tiny bit every 100 hours of working time. Using synthetic high heat grease. This compressor will charge 2 5 gallon tanks from empty to 175 psi in about 30 seconds. Bow it doesn't do it that fast at idle, bit of you have anyhingover 1100 rpms its golden. Its silent. Its amazing. Ot all vehicles can fit mine, it was super easy on my vw because the motor has no ac.

    • @phuckgoogle6343
      @phuckgoogle6343 Před 2 lety

      Clearly you haven't you the new viair Compressors..and you seem like a salesman

    • @dubzy8334
      @dubzy8334 Před 2 lety

      @@phuckgoogle6343 Just curious if I'm a salesman what am I selling? Never once even mentioned where I got the pully driven compressor. I'm currently running to brand new 485c via air compressor, and a don't hold of candle to a pulley driven compressor. Not trying to sell anything to anybody I'm just sharing my personal experience with both technologies you go ahead and do whatever is right for you

    • @phuckgoogle6343
      @phuckgoogle6343 Před 2 lety

      @@dubzy8334 that's what everyone should do "run what unit(s) they like..I too run two 485c comps..and I've never had a problem..either setup works in the end.

    • @0verload
      @0verload Před 6 měsíci

      @@phuckgoogle6343 Exactly what Viair compressors you referring to? While Viair is good, I have yet to see one that compares to a belt driven pump setup when it comes to speed and overall efficiency.

    • @0verload
      @0verload Před 6 měsíci

      @@phuckgoogle6343 Yes, 485c's do work and they're pretty reliable but they absolutely don't hold a candle to a belt driven setup when it comes to CFM. The belt driven setup is going to be many times quicker, and quieter too. That said, the belt driven setup may not be for everyone, while Viair's are pretty versatile.

  • @nvseg6
    @nvseg6 Před 7 lety +1

    Do a walk around video/ highway pull

    • @EvilStreetShark
      @EvilStreetShark  Před 7 lety

      I will definitely do some! Coming soon! Thank You for the comment!

  • @TheGuccimane14
    @TheGuccimane14 Před 6 lety +2

    About how much you drop on the bag setup?

    • @EvilStreetShark
      @EvilStreetShark  Před 6 lety +4

      With everything plus the 2 compressors and 2nd relay harness and height sensors $3,800 but its actually cheaper now during holidays!

  • @mississippi_721
    @mississippi_721 Před 4 lety +1

    Great video! Is it good for regular use? I'm thinking of putting for my Honda city! We travel a lot and is suitable for off-road? What are the most common problems faced and their reliability? Awaiting your precious reply thanks!

    • @EvilStreetShark
      @EvilStreetShark  Před 4 lety

      Putting air suspension on the car for offroad? Or how is the car overall?

    • @mississippi_721
      @mississippi_721 Před 4 lety +1

      @@EvilStreetShark is air suspension good for regular use? I heard the rubber get punctured due to stones and debris!

    • @EvilStreetShark
      @EvilStreetShark  Před 4 lety

      @@mississippi_721 Yup! Its good for regular use! Nope! The bag will not get punctured due to stones and debris.. It is really strong! Air suspension in todays age is top quality and strong

    • @mississippi_721
      @mississippi_721 Před 4 lety +1

      @@EvilStreetShark thanks buddy! You have a done a great job! Is there any place to keep the compressor and the tank elsewhere? I heard some people put under the hood!

    • @EvilStreetShark
      @EvilStreetShark  Před 4 lety

      @@mississippi_721 It depends on the car you have and space in the car...

  • @unityelt
    @unityelt Před 9 měsíci

    On average, how long does it take one compressor to lift the car like 1 min or 2?

    • @thomas-gj7pp
      @thomas-gj7pp Před 7 měsíci

      Not long if the tank already has air

  • @jp-fe7yi
    @jp-fe7yi Před 7 lety +1

    How often will I have to drain/fill my tank?

    • @EvilStreetShark
      @EvilStreetShark  Před 7 lety +1

      I recommend every time you drive the car and get home drain the tank! It's super easy! It will build moisture in all temperatures!

  • @darandomgamer3809
    @darandomgamer3809 Před 4 lety +2

    How long was the install?

    • @EvilStreetShark
      @EvilStreetShark  Před 4 lety

      I didn't install it on this car.. Someone else did.. It took us 2-3 days on a gt350 outside..

  • @flvsh_m3
    @flvsh_m3 Před 6 lety +2

    Did You Get Through Bag Riders Or Who? Also Do You Recommend 400c Or 444c Compressor

    • @EvilStreetShark
      @EvilStreetShark  Před 6 lety

      I got my kit through a local airlift installer in my area.. The recommended compressor is 444c compressors! The best time to buy the airlift suspension kits is Black Friday! Biggest sale of the year!

    • @flvsh_m3
      @flvsh_m3 Před 6 lety +1

      EvilStreetShark So You Recommend Buying It During Black Friday & You Think 3/8 Line Is The Way To Go?

    • @EvilStreetShark
      @EvilStreetShark  Před 6 lety

      Yes! I recommend buying it during black Friday! I recommend 1/4.. 3/8 it may crimp the lines because its so big..

    • @flvsh_m3
      @flvsh_m3 Před 5 lety +1

      EvilStreetShark What About Tank What You Recommend Brotha?

    • @EvilStreetShark
      @EvilStreetShark  Před 5 lety

      I really depends on were you put your tank! I have a 4 gallon tank.. The 5 gallon tanks are bigger but the width is not as long! Really depends on where you are going to install the tank in the car.

  • @KianPalmer
    @KianPalmer Před 7 lety +2

    Great video demonstration! I notice that your tank and compressors are not mounted directly on the car but rather on a platform. I like that idea because I don't want to drill too many holes in my car. What is that platform made of? Thanks!

    • @EvilStreetShark
      @EvilStreetShark  Před 7 lety

      Just a basic plywood cut out too make a shape like the trunk! yeah.. I hated the idea of drilling into the trunk.. The board is held by velcro!

  • @jordanpadallan1402
    @jordanpadallan1402 Před 5 lety +2

    No water trap?

    • @EvilStreetShark
      @EvilStreetShark  Před 5 lety

      There is a water trap under where the spare tire is..

  • @jamesbest9741
    @jamesbest9741 Před 4 lety +1

    What tank size and compressors? are they 444c?

  • @homsuy6092
    @homsuy6092 Před 3 lety +1

    In stall camry2002. Yas or no

    • @EvilStreetShark
      @EvilStreetShark  Před 3 lety

      Whatever vision you want to accomplish! Turn it into reality

  • @808ebolster
    @808ebolster Před 6 lety +2

    How much did it cost for everything?

    • @EvilStreetShark
      @EvilStreetShark  Před 6 lety +1

      When I bought my kit on sale! It was $3,800 with Airlift Performance 3H height sensors, 2nd compressor and 2nd relay harness! Now on sale they go for $3,200.

    • @ramones53rd3rd
      @ramones53rd3rd Před 5 lety +1

      @@EvilStreetShark was that for everything including the bags / struts or was it just for the air Management?

    • @EvilStreetShark
      @EvilStreetShark  Před 5 lety +1

      @@ramones53rd3rd yes! The best time to buy air suspension is black friday and holidays

    • @goalazo93
      @goalazo93 Před 5 lety

      How much was 2nd compressor and harness kit

  • @Royal_E30
    @Royal_E30 Před 2 lety +1

    What size tank is that

  • @Unique1Media
    @Unique1Media Před 2 měsíci

    Dam that thing loud !
    Do more research?! I heard many other a lot quiter
    And I didn't hear much difference at all... 3P vs 3H

  • @edgararauz810
    @edgararauz810 Před 6 lety +2

    Too much bla bla bla.. go ahead to the point!!!😩