Resin Dandelion Paperweight Ball CRYSTAL CLEAR! - DIY - how to make it yourself tutorial | Art Resin
Vložit
- čas přidán 3. 07. 2019
- Like and SUBSCRIBE, that would really help out :) walkthrough of making a resin dandelion paperweight ball ornament, and it turned out crystal clear!
This video will show you how you can make one of these ornaments yourselves. It really isn't that hard, and you need a minimum of tools. you put the work into it, and it really comes out as art.
In this tutorial I casted two dandelion ornaments, but due to the time it takes to sand, I only finish one of them in this diy tutorial video.
The tools I used:
slow set epoxy resin
silicone ball molds (originally intended for ice balls)
bosch drill
Dremel with sanding bit and diamond bit
sanding paper 80 - 1200 grit
micro mesh 1500 - 12000 grit.
Please comment below if you have any questions, and I will gladly answer them.
#resindandelion #dandelion #dandelionpaperweight - Jak na to + styl
Remember to hit that SUBSRIBE button for more videos like this in the future! Hope you liked the video! If you got any questions or feedback, just write it in the comments and I will get back to you :)
Hello, good video! I wonder how you fix the electric drill to the sphere epoxy?
I drilled a screw into some cork, and then glued the cork to the sphere with a glue gun 😊
@@BakerTheCreator Aahh genius! I tried sanding by hand and it takes forever! I'm gonna try your method. Thank you!! :D
Great video and I have just bought this mould for this purpose, now to me it looked as though you'd done a great job of glueing that! If you were to do this again what would you do to stop the leaks? Lovely result. X