Sorry about the ride I hope you can come back from this I raced sprint cars and had this happen to me and I came back so can you good luck buddy keep more videos coming 😢
Need about 6 solid cinderblock, 2-3 placed under the low tires that are on the ground when teetering, some D rings welded to some 3/8 plate anchored to the concrete and two 3/4 ton ratcheting come-along. Two 20 foot sticks of .120 wall DOM 1-3/4” pipes to replace the top tubes and a pipe bender. We’ll have this baby ready to crash again next weekend.
All set up for the high banks now!!
That’s what I was thinking 😂
Daytona on dirt
Looks like a bristol build to me
The power of positive thinking 😉
If it was reverse lol.
So much torque the chassis twisted of the line
😅😅😅
Not quite, but a funny thought. 🤣👏
f&f reference?
That was exactly when I was thinking lol
This is a unbelievably underrated comment
That will buff out
That’s what I’m sayin
Just needs a little elbow grease
@@eingalls5736up
Just needs a wack or 2
I don’t think so it looks like my grandmas back
"Let me do it for you"
"Let me do it for you"
"When all i do is for you"
"Creamy"
☠️💀
It's supposed to be Kermit or kirme
This song along with the bent to hell frame has me rolling 😂
Me too😂
This music suits this video
U need a rollcage😂
U need anti roll bars
You need a life
"I know what's wrong wit' it, It ain't got no gas in it!"
“There was so much torque, the chassis twisted coming off the line”
Bro that song with that crippled frame is phcking A grade comedy
As long as the soft chewy center is ok. ( the driver).
Chewy with a crunch in the middle 🗿
Lmao wth 😂😂
Dang bro. She looks like she served you well.
Save what you can, maybe restore it to good shape once again!
Bro just send it to Los Santos Customs it'll buff
Edit: "see ya next time"
-Los Santos Customs guy
By the looks of it, he barrel rolled
The "let me for you kirbie" part always gets me 🥲
Now just gotta make her bigger and better💪
Im no expert but i think it is a bit bent
I think it's the camera angle
The miss piggy track had me crying 😂 but being real your build her bigger and better bro!
“How many Gs that cost you?”
_”Accelerometer registered 2 G’s before the rollcage started to buckle”_
Una pulida y queda genial 😂😂😂
Right Hand Slide 🔥😂
Pov: you let your racer friend drive your car
This is exactly what my tiny go cart look like after I jumped it way too many times
Sorry about the ride I hope you can come back from this I raced sprint cars and had this happen to me and I came back so can you good luck buddy keep more videos coming 😢
Been there! We raced with the Allstars 360 and 410's. Eldora didn't always play nice. Good luck and get back out there
Brah that song tho
In all my years of racing haven't seen that
Ain’t got no gas in it
You should try to restore it
Hans drifting he's new Porsche 🗣️🔥🔥🔥🔥🔥
What happens when you don't throw extra support along the top. An x on top of engine and an x in front of radiator would of prevent this I'm sure.
That'll buff right out🌚🌚🌚
A little too much cross weighT. The tow might be knocked in a little 😊
My dad used to race sprint cars
As a race car driver, I can officially say...
Something's wrong I think
What did you expect with that spindly frame??🥱🥱🥱🥱🥱
Got a little too spicy with it
Damn glad your good, imma dirt racer myself and had a fair share of scares and broken runs
Looks like you sent it just a little bit to hard there bud
Райн Гослинг би луйкц:
“So much torque the chassis twisted”
Oof too bad it broke the motor too. New chassis doesnt cost a whole lot, but that motor does
A torch and some well placed winches/come along will straighten it out.
F*** it had a beautiful V8 engine in it love it
The music touches the SOUULL.
That's what some drag car frames be looking like, God Damn
I saw it roll up with one wheel in the air and instantly new that was a wild ride and hard hit
Holy shit Is that the new boomerang chassis
Need about 6 solid cinderblock, 2-3 placed under the low tires that are on the ground when teetering, some D rings welded to some 3/8 plate anchored to the concrete and two 3/4 ton ratcheting come-along. Two 20 foot sticks of .120 wall DOM 1-3/4” pipes to replace the top tubes and a pipe bender. We’ll have this baby ready to crash again next weekend.
The chair that you get at the cafe
Bro sent it off a ramp
How does the suspension work in this??? this looks interesting
Tweaked is an understatement.
That frame is royally fucked.
There goes that Miss Piggy song again.
“It had so much torque it twisted the frame”
Now you only need a massive wing on the roof and down the dirt oval!
“Aint got no oil in errr”
Couple of spot welds and she's solid.
Bro almost turned his car into a low rider
Bros got the gmod car 💀
thats a good refrence of how torqe works
That must be like driving the reliant robin
It’s fine it’s just running a little hot
Ouch.....nothing better than doing it better!!!! Everyone ok??
Extended sprint car frames make great rock crawlers. Just a thought. Put 3/4tons and a ford bronco2 motor trans and t case in mine. It was a beast
Potholes are hell !
R.I.P wallet😢😢😢😢😢😢
"So much torque the chassis twisted coming off the starting line"
I think the chasis is slightly twisted. You should definitely get it checked.
At the same time it was clear that there was not enough reinforcing crossbar
Literally all shopping carts are all like that
Gotta get that speedway
That tube chassis is fucked
I cried like dead serious I am sad watching this
Something seems different with my race car this week... damn it.😂😂😂
😢😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭
havent heard this meme in like a year lol
God damnit Billy
Craigslist add be like, "runs good. Frame's straight"
The go kart has scoliosis
I was watching when that happened
I need the backstory for this
The car is like: 🍌
IS THAT THE GMOD CAR!?!?!??!?
Did someone really think that that tubing was going to hold that kind of power😂😂😂
that bump was a wall😂
Ngl this looks like the buggy from hl2
Me after putting a cold air intake on my Honda fit
It's my personal profession to say DAME THAT'S FUCKED UP
it ain't got no gas innit😅
This buggy has scoliosis 😭😭
Like a chip off the ol’ block
What did you have to do to make the chassis end like this? 😂
Looked like fun while it lasted. Lol
PERMENANTLY SET UP FOR TURN ONE APPROACH
Half life looking ahh car🥶
Needs more cross support
Shut it liberal
Hate when that happens
All it needs is a little jb welded
The song lol 😂😂😂😂😂
So much torque the chassis twisted off the line?
I want to cry.
Holy shit🤣🤣