Easy Hack How to Lube a Mousse Foam BIB without removing the tire, how long will it last this way !?
Vložit
- čas přidán 4. 06. 2021
- If you like this content NOW YOU can Support this Channel with any Donation VIA PAYPAL by clicking on this LINK - www.paypal.com/donate/?cmd=_s...
Link to Facebook account - / tiberiu.iepan
Link to Instagram account - @vegasromaniac - / vegas_romaniac
Link to tweeter - / romaniacvegas
🤗 Welcome to Vegas RoManiac Channel 🤔
😏These are some other links you might be interested in, every click supports this channel😏
😍 I ride on this Knobby REAR TIRE - amzn.to/2MQm5lM
😏 I ride on this Knobby FRONT TIRE - amzn.to/2NOmXEa
😲 My favorite Tire mounting compound - amzn.to/2NNH999
🤩 My favorite motorcycle tie-downs - amzn.to/1ifGRaa
😀 My favorite air filter for the money - amzn.to/2QaKRLI
😃 My favorite Oil Filter - amzn.to/2QaLd50
😉 My favorite Magnetic oil drain bolt - amzn.to/2Q6McTO
🤗 For more items, you can visit MY STORE ON AMAZON 🤗
👉 www.amazon.com/shop/twowheels... 👈 - Auta a dopravní prostředky
Thanks for sharing this pump idea. I already installed a valve stem based on a tip to do so to help set the bead.
Awesome man
That is a really good idea. It would be pretty easy to put two or three 1/4" zerk fittings on the rim. The tap and six fittings cost about $10.
more unnecessary holes , the valve holes needs to be filled anyways
but i agree in case you dont have holes already
I like it. Will install it on my bike as well. Great hack 👍👍👍.
Awesome
I was the guy that questioned the effectiveness of this method in your last video. I appreciate you doing this exercise. However, I dispute your conclusions. Not only did zero lubricant make it to the outside of the mousse (as I predicted), the lube didn't even make it halfway around the rim! I guess that this is better than nothing, but there is no way I would waste lube using this method. -- Now try this: put lube only on the outer circumference of the mousse. I have tried this and the lube migrated inward to the rim. In fact, some installers put a thick bead of lube only in. the tire. Their mousses came out wet. -- Having said this, I love your channel, your ingenuity, and your enthusiasm. Keep rockin' it.
It was my mistake I was cheap, I knew inn gonna need to look inside so I put in very little also I didn't ride it long enough on the road.. I can guarantee this will work great after I saw what happens inside. Specially with 2 cable cores, it would be great. Now I need to find cheap grease somewhere
@@vegasromaniac OK. Well, good luck with it.
Great video! Thinking that if you only use mousses, why not add 2 or 3 valve cores to have one every 120* or 90*? Squirt the goo into each one and you're golden.
too many holes but i do agree i do have a extra rimlock hole ill be adding another calve core later on
Where do you find a pump that’ll fit the schrader valve?
harbor freight , or amazonn
Looks lubed for a short distance:)
Yeah with 2 valve cores and more lube it will work guaranteed
Centrifugal force and heat to make it thinner... Should work
Yeah it will be great
Did you delete your cycle sleeves video ?
not sure i follow
Vegas RoManiac the video you made about those arm sleeves items of clothing (fabric tubes you put on your arms )
@@zeez9053 it's on Vegas romaniac review channel not here..
Most Grease Guns have a flexible hose which you could fit between the spokes. Take the Valve Core OUT....and you can push in a shit ton more lube, enough to push a Fat Girl through a Doorway. Then re-install the Valve Core. You may have gotten more Lube around the bib if you spun the tire on the bike stand.......that way you could simulate 50 mph and get better results. . . . .AND if you wish to keep the Lube inside the tire and not squeeze it out between the rim and tire while rotating.....spread Bead Sealer all around the Bead before you inflate the tire.
I've tried that but the nozzle it's not compatible
@@vegasromaniac If you push the two ends together and hold pressure, it will work. I got a flat one time in my work van and refilled it with HVAC Refrigerant and the nozzles were not even close to compatible. Its amazing what your fingers and a little pressure can do < what she said, LOL. Try it, it will work.
If the rimlock is on the other side, shoot it in there too.
I might put 2 valve cores, just need to get another
put 2 valve cores in the whell
Yep that's the plan, need to find some
@@vegasromaniac cut out of old tubes
@@arthurslader2547 I'm out.. Looking for some..
@@vegasromaniac i got about ten i do not fix pinch flats but i save the tubes
@@arthurslader2547 yeah i am running mouse for so long, i only had 2