Flysurfer Hybrid Water restarts.

Sdílet
Vložit
  • čas přidán 23. 08. 2024
  • fysurfer hybrid restarts from last season.
    how well does a flysurfer hybrid restart ?
    restarts from flysurfer hybrid
    hybrid kite water restarts
    water restarts flysurfer hybrid
    how good is the flysurfer hybrid water restart
    does the flysurfer hybrid always restart
    restarting flysurfer hybrid

Komentáře • 8

  • @sauce729
    @sauce729 Před 2 měsíci +1

    Relaunch is amazing on these kites. I've beet able to reverse launch off the water with as little as 5kns, with 7.5m This kite will also fly with inverted lines, no problem.

    • @yannickver
      @yannickver  Před 2 měsíci

      thx for confirming reverse start !

  • @leifquraeshi
    @leifquraeshi Před 2 měsíci

    Very nice.
    I would love to see a video on how to best drift launch the hybrid

    • @yannickver
      @yannickver  Před 2 měsíci

      I don't have a boat, so hard to try it.
      I think the only problem you might get (apart from twisting the lines or bridles) is to inflate the kite enough on the boat or in the water. Even with a normal launch on the beach it takes some time to inflate the kite properly.
      The restart on itself will not be a problem.

  • @ugge101
    @ugge101 Před 2 měsíci +1

    mooi mooi mooi. Reverse restart al geprobeerd?

    • @yannickver
      @yannickver  Před 2 měsíci +1

      Alleen op 't land en werkt perfect... op 't water is dat niet nodig, gewoon aan 1 lijn trekken en hij gaat omhoog.

  • @fredodofre
    @fredodofre Před 2 měsíci

    Interesting! Personally I had an issue with the 2.5m (a firefly v2, but it's quite similar to flysurfer hybrid). Frontal crash, wave over it, full of water. I suppose it's more probable with small size because the inflated part will be smaller than wave (or even chop) size

    • @yannickver
      @yannickver  Před 2 měsíci

      When I crashed my hybrid in the waves it just floats over the waves and restarts (relatively small waves) . If you have a big breaking wave over it, this might give problems. (but with all types of kites this might give problems).
      I have read on fora from users getting water in the inlet valve and having problems to restart. There are small holes on the sides of the kite to let the water/sand out. On flat water, if you wait water will get out and it will restart. in breaking waves I think it will not restart.
      But the restart is so fast, If you are lucky you can restart before the next wave hits the kite...