Ring Doorbell Plus Installation DIY - Ring Video Doorbell Wired Installation with Existing Chime

Ring Doorbell Plus Installation DIY - Ring Video Doorbell Wired Installation with Existing Chime
Ring Battery Doorbell Plus: amzn.to/3TDfXi7
Ring Battery Doorbell Plus with Stick Up Camera: amzn.to/3TBT7HN
Ring Battery Plus Solar Charger: amzn.to/41CauKd
In this video I'm going to install the Ring Battery Doorbell Plus using the wired installation method. Once I have the Ring doorbell out of the box, I'm going to open the battery cover by lifting up from the bottom. Then I can remove the battery by pressing on the metal release tab. I'm doing this because I want to start charging my battery before going outside to install my doorbell. And you can tell it's fully charged when you only see a single green light on the battery.
For the next step, I'm going to turn off power to my existing doorbell. Now I can remove the mounting screws from my existing doorbell. Once the mounting screws are out, pull the doorbell away from the wall to reveal the wires. At this point keep the hardware bags handy. They're labelled A, B, C and D for easy reference. To release the wires just loosen the screws holding them onto the back of the doorbell. I'm using the angled mounting plate which I'll place over the opening in the wall. Drill two holes at the top and bottom of the plate. To secure the mounting plate I'm using the long screws from Envelope C.
Now that the plate is on the wall I need to loosen the 2 wire screws on the back of the doorbell. At this point just simply connect the wires coming out of the wall. And it doesn't matter which screw each wire is connected to. Now that it's all wired up I'll use 4 short screws from Envelope C to secure the doorbell to the mounting plate. If you're not using the angled mounting plate then you could just secure just the doorbell directly to the wall using the 4 screw openings. The angled mounting plate is completely optional but I know I can remove it later if I find I don't need it.
Ok now I'll turn the power back on and I can test my interior door chime. Right now it's working just like a normal doorbell. At this point it's time to reinsert the fully charged battery. In a few seconds the lights around the button will start flashing. When you hear the musical tones and see the spinning lights the Ring doorbell is ready to be connected to a smartphone.
Now download and install the Ring app for iPhone or Android. When the app is first launched you'll need to create an account if you don't already have one. To start it asks for my personal information, email address and a password. To connect to the doorbell, first tap the Plus button in the app. On the next screen tap the Doorbells button. Now I need to scan the QR code on the doorbell itself. So I'm just going to pop off the cover and scan the code on the side. The app will then take me step-by-step through the entire setup process. The Ring doorbell may even update the firmware if needed. But once it's done I can use my Ring app to fully access doorbell features.
Since I'm new to Ring, I have a 30 day trial to their subscription service. Right now I can view and save recordings as well as receive notifications. But once my trial is up I think all those features will go away and the Ring doorbell will only function as a regular doorbell. I might still be able to get a live view without a subscription but I won't know until my trial expires. And that's how you install and set up a Ring doorbell.
If this video was helpful please give me a thumbs up and hit the subscribe button to stay up to date on all my weekly videos.
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
***Equipment I Use For My Videos***
Canon EOS M6: amzn.to/2pwQ0Vq
Canon EF-M 22mm f/2 Lens: amzn.to/31mLfLq
Tokina 11-16mm Wide Angle Lens: amzn.to/33TFaYH
Fotodiox EF to EOS M Lens Adapter: amzn.to/31u3AGq
Comica CVM-WM300A Wireless Microphones: amzn.to/31tbiAD
Aputure Amaran AL528W LED Light: amzn.to/2VRuwyK
Kamerar SD-1 Camera Slider: amzn.to/2VUB5Ax
AVermedia HDMI Game Capture Module: amzn.to/31phsSp

[@tuduleshiggins8832]

Best video demonstration on how to install the Ring Doorbell Plus.

[@claudiovargas9571]

Very good way to teach it thank you ! I been have problems with it battery keep dying on it I tough I did something wrong when I installed long ago but it is good just found the transformer was doing taking a break from work lol

[@nurankhan4113]

One question, if you go with the wired method, does the battery need to be charged regularly?

[@richmonddan8249]

Unfortunately, this video shows how to install a battery Ring doorbell, but the title shown for the video is "how to install Ring wired doorbell plus". This is not for a wired Ring doorbell!

[@rogeliodiaz8228]

Bro it was a wired ring door bell it also needs the battery has a backup power source if the power of the house shuts off.

[@smokeybremen]

It shows a Battery Ring Doorbell plus getting hard-wired, just like the title says.