How to Remove the Huawei Mate 10 Pro Back Glass Cover
Vložit
- čas přidán 10. 09. 2024
- Protect your Mate 10 Pro - amzn.to/2IrKjzM
My Favorite Tool Kit - amzn.to/2zvwUjB
Hot Plate Machine for repairs - amzn.to/2hnyqQ8
Heat Gun for repairs - amzn.to/2hlClgb
Be my Patron: / cellularproz
This is a tutorial video on how to remove and replace the back glass cover on your Huawei Mate 10 Pro.
Its the same procedure and same glass back cover used for all carrier models.
All models - L09 L29 AL00
BLA-L09 (Single SIM)
BLA-L29 (Dual SIM)
BLA-AL00 (China)
I used the following tools:
1. Open Prying tool
2. Hair Dryer or Heat Gun
Warning: Repairs will void your warranty with the service provider and manufacturer of the device. We are not responsible for any damage caused by attempting this repair.
you are professional
Hello how to stick back. the backcover? which glue to use
Does a regular hair dryer do the job?
@Serg Tech
Are the tools for the Mate 10 the same ones used for the Mate 8? thnx
can we make the back cover transparent?
Good vid but you didn't show the adhesive application and more importantly the connection back to the fingerprint scanner
unfortunately I can't open back cover, I heated it on a hot plate in different time/temperature combinations
Despite use of appropriate suction cup, there was not even a small gap between two parts of phone.
If the back cover breaks can I get a replacement?
@Serg Tech
Great video and presentation, much appreciated. Just your opinion if you would please : is watching YT videos the best way to learn this work or are there any online or hands-on technical courses you highly recommend?
Also what areas of the mobile phone business do you think offer the best opportunities for demand and profit? Much thanks again.
will this still give it it's water and dust resistance?
It will be dust resistant but not water resistant anymore
110c it's 110 Fahrenheit NOT Celsius
The battery of huawei mate 10 pro is explode??
Wtf no
No matter what I did there wouldn't appear a gap I could put something inside so that I could use my tools
@Kevin McCabe and how did you solve it? i`m stuck with the same problem..
This might be a bit late, but I had the same problem but I managed to get it loose in the end. I put mine in the oven at 100°C for two minutes at a time. Once I took it out, I used a suction cup to pull it. It will require several times to get it loose. And don't just pull on it, but push on it too. So you do a back and forth motion with the suction cup to wiggle the glue off. You have to be quite careful with it, once I got something between, I started prying and the entire back cover broke and shattered (a lot of broken glass everywhere). So once you get something under the cover, heat it up a bit more to make sure everything goes smoothly.
@@TheKalkalash same happened to me lol
Right now I just feel to throw this in the garbage