Apple MacBook Pro A1278 on and off, Fan spins and off, 820-2936-B no display repair
Vložit
- čas přidán 29. 08. 2024
- Apple MacBook Pro A1278 on and off, Fan spins and off, 820-2936-B no display repair, MacBook pro not charging , apple macbook not turning on, 820-2936-b dead repair, apple macbook pro running slow with battery, macbook Air repair, Retina repair, Apple liquid damage repair, no green light on charger repair, no display and dim display repair.
Nasir bhai is one of those few talented engineers who can bring new life to any dead motherboard. Apple devices are one of the most difficult to repair but you can see in this video how methodically the problem was diagnosed and fixed.
Really thankful for ur appreciation sir. We are grateful for having audience like you who gives us satisfaction for our work. And motivates our team to bring quality content.
Thanks once again sir. Keep supporting and Sharing our videos.
I always view you one the best engineers of laptop in Nehru Place Delhi, I really feel proud of you that you are my younger brother. Have the same confidence, you have made many people a skilled person. I have also started learning a bit now. Thanks for you beautiful video. You are master in tracing problem with resistance. God bless you. Keep sharing your experience with the world who are interested in this field.
Thanks brother 👍. Keep supporting and Sharing our videos ❤️
Thank you! I solved my 820-2936-B problem
Always welcome and ready to help 😊. Keep supporting and Sharing our videos ☺️
You did a great job but you didn't zoom in for us to see what you changed
It's an old video... didn't had the close in camera facilities. Now, you cam watch out new videos with improved clarity and quality.👍
I'm completely faced with this defect and I haven't been able to resolve it. It doesn't have 5V or 1.35V... They keep varying, the cooler rotates and stops... Could you give tips on which vital points to resolve, I'd appreciate it... There's no need to enable the TPS51125, injecting 4.20V into the line 5V TPS51125 heats up but it's not, I already changed it, the same thing continued.
Could be SIO issue.
@@laptex1377 SMC ?
@xistofila7616 yes
Exactly my board. Screen not working, not booting.
Check the DCIN section requirements.
THANKS FOR THE GREATE VIDEO .. I HAVE A A1286 PCB THAT ALMOST SHOWS SIMILER CASE .. MY PCB HAS A GREEN LIGHT WHN I CONNECT CHARGER TO THE FAN STARTS UP FOR 10 SECONDS AND THEN POWERS OFF AND AGAIN STARTS UP AND THE FANS ARE AT FULL SPEED AND IT STAYS ON ONE WAY, TILL I DISCONNECT THE POWER CABLE ….AND THERE IS NO DISPLAY OR CHARM NOISE WHEN IT TRYS TO BOOT OR FAN STARTS, THIS IS WIERED PLEASE ANY ADVICE WILL HELP I AM A …...NOOB THIS IS MY FIRST APPLE LAPTOP .THANKS
Thx for sharing this. I'm having exactly the same pb with my MacBook Air 11 inch. What's the key component you've just fixed on the motherboard that solve the pb?
It's shown in the video
Hello Nasir, Im trying to locate the resistor but couldnt find can you kindly share the picture of it location on A1278 mid 2010 board
You can download the HD pic and locate
Dear thanks for your contribution, I have the same problem in the same model, but when checking the resistance is its value correct, what other component can cause this failure?
There could be many reasons for this problem oneof the reason has been shown in the video.
Rest and many more concepts are covered in our online video course.
You can contact us for further information.
WhatsApp +919031240767
Which resistor u changed i didn't see it can u upload a pic of it
Yes you can check it...
Mine is just black screen fan on 3 seconds then off the charger light is solid green
Could be Problem from G3 hot or DCIN section
@@laptex1377 do you have a diagram or video to show?
I have same issue in 2011 Early MBP. Is there anyone you recommend for service in chennai ?
Pls search there...one of our students can help you there.
thanks to share valuable information keep on continue.
Thanks 👍
Hi Nasir
I have the same problem with a MacBook Pro A1286 late 2011 ? I think it is a current sense problem ? Can you help me or can I give you more information about the measures that I have done ? Thanks
i am from Belgium
Better check the requirements and also if there is shorting in the motherboard
SETH I'm having same problem, my mac was working perfectly and I left it to go out coming back everything was blank. If I plugged in charger charging light will come up also battery status light by the side will give me battery status, but it will never power on, can this be battery aswell? Because condition before was change soon.
I remove the battery and plugged in charger to power it on also no power. Can I get new battery and try it or the problem is what you just fixed now?
Could be 3.42 G3 hot supply problem
I got an A1342 that comes on with no display and solid sleep light. Fan spins and after maybe 10 seconds, it speeds up and power is cut. It will then reboot on its own and this time the fan will speed up again. Only this time, the machine will not power off. It will stay on with no display, sleep light lit and fan on max speed. This is when plugged into MagSafe charger. First power up always causes a reboot and the second time it stays on with the same symptoms.
If I do the same with just the battery, it will do the same, but continuously reboot just as the fan speeds up. Under battery, it cannot stay on.
Any idea what might be the cause here?
Try to clean ME region of the BIOS in the system if it works fine then no problem. Else try to check the DC-DC run section.
@@laptex1377 Unfortunately, the issue is the ISL9504 BHRZ chip I think. I was feeling around the board and as I put my finger over that chip, boy did I feel that. It gets insanely hot very fast when I power the machine up. Something bad is going on there given the amount of heat being produced by that chip.
I don't have any soldering skills or equipment, so unfortunately can go no further. I just wanted to figure out what was wrong and whether it was actually the board. Looks like it is.
Sir I have same MacBook Pro A 1278 problem is that it’s working very slow all the application and function are working very slow please help
any of bus sencer if cut physically can cause running slow.
only with the replacement of R7005 worked?, because later on the video i didnt see the apple icon on the screen and didnt heard the boot sound, i am not sure if it worked.
This is most usual problem in this model and no relation with display it works fine with battery but problem with charger. I hope this will help you. Thanks for your concern.
@@laptex1377 Im a little confused on what you mean. Did the logic board work properly only when connected to battery, or did it not work with battery and charger?
EDIT: Im having the same issue and fans turn for maybe 3 seconds then stop. and repeat.
@@DSuave03-Me I'm having same problem, my mac was working perfectly and I left it to go out coming back everything was blank. If I plugged in charger charging light will come up also battery status light by the side will give me battery status, but it will never power on, can this be battery aswell? Because condition before was change soon.
I remove the battery and plugged in charger to power it on also no power
@@jamiusamin Is your problem resolved? if yes how and where. How much was the service fee?
Nice brother
Thanks bro.
very nice
Thanks 👍
could you help me find where can I get like this MacBook Pro schemes ? thank you
U can get sone free schmatics on the free website. For more exclusive download u can join the paid subscription of some websites.
forum.laboneinside.com/viewtopic.php?t=5793
schematic-x.blogspot.com/2018/04/apple-schematics-pack.html
Do you have a new video that shows what you are doing please.?
Okay will check
thank you sir i have don
You are most welcome dear
sir i have the same problem but my ressitor is good, bad luck
Check some other possibilities 👍
Need to check requirement.
What did he do to get that working
Resistor was open of that point where charging ic supply gets in i replaced the resistor only.
Are you in America? I need my macbook fixed
In INDIA
Would be nice to see what you doing😔
Yeah it's an old video when we were not using a good quality camera now you can watch our good quality videos.
Sir ji aap kya Mujhko training de sakte hain kya
WhatsApp
+919031240767
For details
hii
@@laptex1377 sir i want joining in your telegram
hi
Laptex.in
Sir i have the same problem.. Mine is a macbook air mid-13.. Should i first chack the ohm value...? And if its high.. Do I have to replace something..?? Also what did you replace..??
If you will be kind to please answer...
Check the impedance value... If its not good then change it.