Raptor Painting My Sprinter RIOT VAN With A Roller & Brush | DIY VAN PAINT JOB SERIES PART TWO

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • This video is where it all gets rolling (pardon the pun). This is the second part of this three part series, and in this video I get the bulk of the work done with painting my van. As you'll already know if you watched the first part, I am using U'Pol Raptor paint to do this; and as we don't have the space to spray the van, we're going at it by hand using textured rollers and a brush for the cutting in.
    So, in this video, I prepare the van for painting, get the sanding done, apply the paint and restore the headlights (as well as chuck a cheeky bit of tint on them).
    You'll see a glimpse of the van at the end, but a full reveal will be coming next week!
    If you're looking to do the same size vehicle, this is what I recommend buying...
    1x 5L Black Raptor paint
    2x 5L Tintable Raptor paint
    1x 5L Raptor hardner
    1x 1L Tint (colour of your choice)
    10x Assorted paint brushes
    2x Raptor roller tray kit (save these rollers for your final coat)
    1x Raptor adhesion promotor
    10x Textured roller heads (link below)
    80-180 grit sand paper
    Abrasive pads
    Isopropanol Alcohol (Clean the vehicle before paint)
    Mixing paint pots
    I brought all of my Raptor products from Marlow paint suppliers
    www.marlowpain...
    Textured roller heads...
    amzn.to/44WDyhc

Komentáře • 25

  • @MrRanDomUk
    @MrRanDomUk Před 3 měsíci +1

    Very thorough job there , I’ll be doing mine this summer, thanks for the tips

    • @livinginkevlar
      @livinginkevlar  Před 3 měsíci

      Thanks, just don’t do it on a really hot day unless you’re undercover 👍🏼 find me on Instagram and let me know how it goes.

  • @graham_ozzy
    @graham_ozzy Před 3 měsíci +1

    Nice video and the van is looking great 👍 well done

    • @livinginkevlar
      @livinginkevlar  Před 3 měsíci +1

      Thank you, part 3 will be out Monday and you’ll get to see it finished…well van builds are never truly finished 😄

  • @scottgalloway4897
    @scottgalloway4897 Před 3 dny +1

    Great video all round,just one question how many 5ltrs tubs was used?

    • @livinginkevlar
      @livinginkevlar  Před 3 dny

      2x 5Ltr tintable
      1x 5Ltr black
      Glad you enjoyed the video and all the information of what I used is in the description 👍🏼

  • @5mjc
    @5mjc Před 3 měsíci +1

    Best to have a few mini rollers at hand or sleeves and keep,the handle clean.

    • @livinginkevlar
      @livinginkevlar  Před 3 měsíci

      Have you painted a vehicle yourself with raptor paint?

  • @user-en4vw4iy1q
    @user-en4vw4iy1q Před 3 měsíci +1

    Looks great Cam… love the colours! Texture might make it a pain to clean? All in all, good job! 👍🏻

    • @livinginkevlar
      @livinginkevlar  Před 3 měsíci +1

      Thanks a lot 👍🏼 Definitely can’t use a sponge on it but a decent scrubbing brush apparently works well.

    • @fattaff1912
      @fattaff1912 Před 3 měsíci

      @@livinginkevlar Long Handle scrubbing brush/broom with a bucket of decent snow foam works a treat Cam if you can get one👍

  • @NK-dl2nc
    @NK-dl2nc Před 3 měsíci +1

    Should have hired a compressor and done it the easy way. It looks really difficult to cover with a roller and you had to work your arse off to achieve what you did. Bet the neighbours love you in mock tudorville.

    • @livinginkevlar
      @livinginkevlar  Před 3 měsíci +1

      I already have a compressor, I did mention it in my video but I think I would have to do more prep work like cover the driveway, my neighbours cars, garage door etc in the end I thought it would be better to roller it. The only downside was the heat so if it was cooler I think it would of been a lot easier. Actually my neighbours are really nice apart from one miserable git! 😂

  • @ashogmhn2302
    @ashogmhn2302 Před 2 měsíci +1

    Just come across this channel love van life videos so defo gunna sub but the music makes me feel like this guy likes Tasha sultana's music

    • @livinginkevlar
      @livinginkevlar  Před 2 měsíci +1

      😂 I totally do!

    • @livinginkevlar
      @livinginkevlar  Před 2 měsíci +1

      And thanks for the sub 👍🏼

    • @ashogmhn2302
      @ashogmhn2302 Před 2 měsíci

      @@livinginkevlar I knew it love her music too and love the content I will defo tune in every week like I do with all my van life content creators. Keep up the grind and hopefully one day I'll spot this beauty of a van in Bournemouth one day

  • @stephensansom1492
    @stephensansom1492 Před 3 měsíci +1

    Peeling the tray shows the importance of keying the body before you paint

    • @livinginkevlar
      @livinginkevlar  Před 3 měsíci

      Absolutely! So glad I put in all the extra effort to make sure it stuck to the bumper and trims.

  • @WagnerGimenes
    @WagnerGimenes Před 3 měsíci +2

    I don't understand the spray on the headlights. I'd want mine clear. Most importantly, are you happy now happy with the result?

    • @livinginkevlar
      @livinginkevlar  Před 3 měsíci +1

      It’s just me being fussy! There is chrome in the headlights and nowhere els on the bodywork so I just wanted a smoky tint to it to hide the chrome. If I’m being honest they could do with less tint on them but I messed up, however I do have extra lights on the van now to help me see at night. Safe to say though I’m over the moon with the end result mate 👍🏼

  • @robertanderson2142
    @robertanderson2142 Před 3 měsíci +2

    Dont see the point in spraying lights

    • @livinginkevlar
      @livinginkevlar  Před 3 měsíci

      I didn’t like the chrome in the headlights, it doesn’t match the vehicle. I did only want a light smoke tint so I’m probably going to sand them back again.

  • @md2320
    @md2320 Před 3 měsíci +1

    Does it peel off the van as easily as the paint tray 😂🤣😂🤣