As an Aircraft mechanic back in the 90's I worked with a helicopter crew chief who was in Vietnam, he said in comparison they had very little trouble with the wooden rotor blades of the Bell 47
Nice share. FYI, the weight repartition in the leading edge is also very important to provide a correct balance. Just an airplane, a rotor blade needs to have the CG forward of the center of life about 25% of chord.
Thankyou for your information. God has blessed America in this regard with kind honest people who freely share valuable information. Mind you, I think they got my idea while doodling on paper {with high-powered satillite / when DCsniper was active} regarding extra large mass at end of blades. My idea was to make the rotor shorter & determined centrifugal throw out force helped keep the blades level so as to lift copper instead of ends of blades lifting up, so idea was to have mass at ends. Basedon what youve shown i think steel leading edge for strength but bit of lead only at end to keep the weight down. Thankyou for your time and effort to bring us this information.
I love your video sir,id like to make one mosquito copter my own. i do not know wher to get ready to use swash plate and main rotor blade. Im just a little non-pro mechanic.. 😊 from 🇵🇭🇵🇭🇵🇭♥️♥️♥️
I wonder how the attachment of the composite blade is done to the hub, with composite lugs. The section of the blade shown here is filled with foam, but I believe that would not be strong enough at the attachment with the pins and bushings. I know there are some with thick solid laminate but I wonder of it's done.
For gyrocopter blade chord is matter? For gyrobee having 210mm chord and 11ft long blade(per blade) but I have 178mm chord and 12.2ft long (per blade) is it ok to use ? Or chord and all to be match?
Thank you for your informative vedios. I want to make a drone by using a motorcycle engine and capable to left a person. If I use 150cc engine and two perpellers. How big should be the perpellers and how fast the rotation should be?
It's interesting that in the world of helicopters both radio control and full size rotor blades are either referred to as 'symmetrical' or 'asymmetrical' whereas a planes wing is 'cambered' or 'uncambered'.
Also provides specific pressure and if it gets low enough bim indicator will either go red or black signifying a potential issue and blade needs to be replaced.
As an Aircraft mechanic back in the 90's I worked with a helicopter crew chief who was in Vietnam, he said in comparison they had very little trouble with the wooden rotor blades of the Bell 47
Thank you so much for your great video, it helped me a lot in understanding details about rotors
Excellent video, very informative. It's not so easy to find this information. thanks for posting
This is the most informative video I have ever seen on blades. Thank you very much bro
Thank you, I've often wondered about the construction of rotor blades, good video.
Thank you very much for sharing that with us.
Good job
Nice share. FYI, the weight repartition in the leading edge is also very important to provide a correct balance. Just an airplane, a rotor blade needs to have the CG forward of the center of life about 25% of chord.
Amazing information! I had no idea there were no many variations. I also love your flower shirt! You must be such a fun person to learn from.
You, sir, sound like a very wise person, and someone that should never be ignored
So we've got Agent Jay-Z covering gas turbine powerplants, & Mr. Skidkicker covering rotary wing theory. Noice.
I was thinking about making my own heli, but I had no idea what the blades were supposed to be made of, thanks!
Glad i could help but think it would be prudent of me to discourage you from building your own.
@@MrSkidkicker yeah I get it man
Thank you a lot, awesome info.
Thankyou for your information. God has blessed America in this regard with kind honest people who freely share valuable information. Mind you, I think they got my idea while doodling on paper {with high-powered satillite / when DCsniper was active} regarding extra large mass at end of blades. My idea was to make the rotor shorter & determined centrifugal throw out force helped keep the blades level so as to lift copper instead of ends of blades lifting up, so idea was to have mass at ends. Basedon what youve shown i think steel leading edge for strength but bit of lead only at end to keep the weight down. Thankyou for your time and effort to bring us this information.
From Odisha
Thanks. Very interesting
Wow very interesting and informative I'm glad I came across your video. Thank you
Good share.. Getting better
(Indonesia)
Neat Explanation Thx
Great 👍
I love your video sir,id like to make one mosquito copter my own. i do not know wher to get ready to use swash plate and main rotor blade. Im just a little non-pro mechanic.. 😊 from 🇵🇭🇵🇭🇵🇭♥️♥️♥️
Thanks
I wonder how the attachment of the composite blade is done to the hub, with composite lugs. The section of the blade shown here is filled with foam, but I believe that would not be strong enough at the attachment with the pins and bushings. I know there are some with thick solid laminate but I wonder of it's done.
For gyrocopter blade chord is matter? For gyrobee having 210mm chord and 11ft long blade(per blade) but I have 178mm chord and 12.2ft long (per blade) is it ok to use ? Or chord and all to be match?
පට්ට එකෙන්ම .
also sikorsky aluminum spar and glued on pockets
❤❤💯💯👍👍
Thank you for your informative vedios.
I want to make a drone by using a motorcycle engine and capable to left a person.
If I use 150cc engine and two perpellers.
How big should be the perpellers and how fast the rotation should be?
Use one meter diameter and 10 RPM. It won't fly, but you won't hurt yourself too much.
Sir Is that manerial available in Nepal? Because I need this types of rotor blades
Ok boss
It's interesting that in the world of helicopters both radio control and full size rotor blades are either referred to as 'symmetrical' or 'asymmetrical' whereas a planes wing is 'cambered' or 'uncambered'.
'Symmetric' is also commonly used to describe non-cambered fixed-wing airfoils.
Whats is actually the fuction of D-Spar? I'v been asked in exam
Dommage que je comprenne pas tout, mais ça semble vraiment intéressant 👍
How thick is the almunium mr??....from Indonesia tq
Sir how is a feather hinge is made. Can I make one just using a bearing? For my RC? Will it stand the centrifugal force?
Hi, do you make the ser of main blades for Hughes 300 , A, B, C, ?
hi ,do you have helicopter main rotor or tail rotor blades ,how to making videos can you post
Do you have free and old swashplate to study on it? Can you explain how it works
Aluminium sheet size?
Indonesia🙏🤝👍
Sir make a video about weight balance in a simple way
I think I will save that for Shannon in AMT 704
my dad made me do this
Have for sell main rotor and main rotor blade?
😍😍😍😍😍🌹🌹🌹🌹👏👏👏👏👏👏👏👏
АССАЛАМ-АЛЕЙКУМ, ИЗ УЗБЕКИСТАНА, МОЖЕТЕ НОМЕР ТЕЛЕФОНА ОСТАВИТЬ ЗАРАНЕЕ СПАСИБО
Some helicopter blades have Nitrogen Gas inside to keep the moisture out.
Also provides specific pressure and if it gets low enough bim indicator will either go red or black signifying a potential issue and blade needs to be replaced.
ترجم الى العربيه