134. Simple DIY - working with corrugated cardboard - part 2

In this video, I show you how I treat the edges of corrugated cardboard. This video shows what worked and what didn't.
There is so much that can be done with cardboard of all types; not just corrugated cardboard. And because free cardboard from the recycle bin is basically endless, that leads to nearly endless possibilities for projects and ideas that can be explored.
I hope that this video inspires you to think creatively and come up with ways to use this abundant resource.
Thanks for taking a look at our video. There are several ways you can help support us for free!
1) Subscribe to our channel and click the notification bell. Doing this notifies you when we release new videos. You can unsubscribe and/or turn off notifications at any time.
2) Watch our videos. We prefer that you watch the entire video however, if you are running short on time or want to speed up the playback of the video, click on "settings" in the CZcams app and change the "playback speed" to "2" (instead of "normal"). This will double the playback speed. Feel free to experiment with other values.
3) Click the "thumbs up" icon which gives the video a "like". This helps to recommend this video to other like minded people.
4) Leave a comment or ask a question. If you prefer not to leave a public comment (or question), you can email us at [e-mail]. We do our best to reply to all comments and questions.
5) If you know someone that might enjoy this video, please feel free to share it with them.
6) If you have a suggestion for a video, please let us know in either the comments or via email.
7) If you would like more information on any of the products we use, please click the links below. NOTE: This channel is a participant in the Amazon Associate Program. As an Amazon Associate, we earn a small commission on qualifying purchases at no additional cost to you.
For more information about the WEN drill press shown in many of our videos, click the affiliate link below.
amzn.to/30yPSoq .
Also, feel free to check out my review video here: • 86. WEN 10 inch drill ... . I have been using this drill press for quite a while and I recommend it.
Here is a link to my favorite hearing protection ear muffs: amzn.to/2ZiPh8T
I find as I get older, I have less tolerance for loud noises. Whenever I am in my shop using a loud power tool like the BladeRunner or a shop vac, I wear these earmuffs.
Speaking of the BladeRunner, here's a link to learn more about it: amzn.to/2NwuVWZ
Also check out my BladeRunner playlist: • BladeRunner
If you're interested in learning more about LibreCAD, a free and powerful yet easy to use 2D drawing program that we use often, feel free to check out our LibreCAD playlist found here: • LibreCAD . If you are new to LibreCAD, I recommend watching the videos in order as shown on the playlist.
Music:
"Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons...
All video content was written, shot and edited (PowerDirector 17) by Matt Ancona.