WATER in Seadoo Engine. DIY Fix Jetski Sunk Won't Start.

Sdílet
Vložit
  • čas přidán 8. 09. 2024

Komentáře • 11

  • @adelsaab4027
    @adelsaab4027 Před 13 dny

    Hi I have the same jetski I changed the oil tank but I didn't bleed the oil out
    I took it on the water it worked at the beginning then knocking sound and stopped

  • @adelsaab4027
    @adelsaab4027 Před 13 dny

    Can I save my engine

  • @orlandoflores293
    @orlandoflores293 Před 7 měsíci

    I have same jet ski, so it’s normal for it to have water in motor? I can still drive it like that? I bought a second had jet ski and my mechanic said it shuts off and he removed spark plugs 4-5 times and water still in there can it still be driven like that or what can I check

    • @onesimpledad
      @onesimpledad  Před 4 měsíci

      So some people say water in the motor will hydro lock it. It's best to get out as much as possible. I've also heard of people turning the seadoo over with the spark plugs out to get all the water out. I got as much water out as I could, and the seadoo has been running great. Well, thanks for watching

  • @Smokin-kw2hm
    @Smokin-kw2hm Před 2 měsíci +1

    Thanks sir. I fkn for got to put plugs back in. Why lie. You not my wife.

    • @onesimpledad
      @onesimpledad  Před měsícem +1

      You're welcome. Hope your jetski is running great, and thanks for watching

  • @stevesanderson8360
    @stevesanderson8360 Před rokem

    What did you do about the crankcase full of water?

    • @onesimpledad
      @onesimpledad  Před rokem

      Tried to remove as much water as possible and just been running it ever since. It runs great and if something else breaks you will see me post another video since most seadoo dealers won't even touch anything over 10 years old and this one is 23 years old.

    • @JOSERGMMXX
      @JOSERGMMXX Před 10 měsíci

      good question cause i did the same thing but all that water seating in crankcase damage the bearing in crankshaft after few years ,😪so i just rebuilt the complete motor but i dont know what is wrong with it starts but no power , smell lot a gas all i did ia replaced crankshaft , maybe timing or some air leak who knows what 😒

  • @seangreene64
    @seangreene64 Před rokem

    The easiest way is to put down some card board and wood. Take the lifting straps and lift STBD side leaning the bike to port. Roll over several times this will get all the water out especially from the counter balance shaft. You will never get all the water out from the balance shaft if you don’t do this eventually seizing the bearings on the shaft.& destroying the motor. Flushed many of these 787’s

    • @onesimpledad
      @onesimpledad  Před rokem

      Well thanks for the advice. Seadoo is still running very strong and if not you will see me post another video when it needs to be fixed since no seadoo dealer in the area will touch a 23 year old seadoo.