Brushcutter hack - chain saw attachment
Vložit
- čas přidán 27. 06. 2020
- In this video I converted a brush cutter to take the cutting blade from a broken petrol chainsaw
00:47 Making the main body
02:05 Making the chain drive
05:40 Making the bar mount
07:06 Making the oiler
07:56 Finishing the body
09:30 Making the handle bars
10:45 Assemble
12:10 Test
Please consider donating by paypal as it will help fund future projects
www.paypal.com/donate?hosted_...
If you can’t donate please leave a comment, it really helps me out in the algorithm
My camera gear
Canon G7X goo.gl/hElOVh
Canon 80D goo.gl/kd49Qq
Rode VIDEOMIC PRO goo.gl/9l8fvX
Rode Deadcat Windshield goo.gl/tHTncw
Canon 15-85 goo.gl/KV3Exj
GoPro HERO4 black goo.gl/dc8wez - Věda a technologie
Where does the chain oil go? is a common question here, the answer is watch all the video because the solution is in there
I watched the video until the end
but I saw only the separate proof in the construction phase of the chain lubrication.
However, chain greasing is a small problem, safety in operation is more important.
@@PopaAlexandru. 1o[]
Como lubrica la cadena!! No inventes !!
Ese trabajo no esta bien ..no tiene resistencia el espadon se van a quebrar los tornillos que agarran al espadon weee
@@sergionino8250You forgot to mention what's more important - the device is an accident generator. Deadly or not, the difference is loading a medical system or a coffin.
Anyway, the people in the UK said how good it was to get rid of the EU ... so the author of the video should use the chainsaw as intensely as possible!
Супер идея! 🤣Купить пилу, триммер и сделать пилу, я ничего не пропустил? 🤣🤣💯
Cool, but I just can't pull myself away from how much easier it would be to just repair the chainsaw...
Funny, I just wanted to write the same as you
It would be safer too lost his chain brake
Someone with the talent and ability to engineer the HELL out of a project like this, can surely fix the saw.
I’m thinking this was more of a “can I?” Vs. “Should I?”
The safety aspect of the chain break and the balance of the saw make me think maybe this was a great way to prove you can, but ultimately not a wheel worth re-inventing. Just my 2 cents.
Можно было пилу купить, но чуваку так интереснее
@@waynehoffman456 Point taken
На таком оборудовании и с таким инструментом мог бы движок новый сгородить. Ну показал мужик сколько у него всего в сарае, ну руки и мозги на месте. Но мысль, что делать ему нехер не покидает.
Согласен
Слишком сложно. Всё гениальное, должно быть просто! Сергей Васильев
It is a mobile equipment that also works gravitationally - as the center of gravity is on the side, it will always tend to cut to the side ...
I applaud the effort. But I would have opened a beer after kicking the saw and spent the next two hours rebuilding the carb.
Great idea to pitch to manufacturers for a modular strimmer system
There are modular systems.
А где смазка цепи? А так хорошая идея, если есть мотор и неисправная бензопила.
У меня две бензопилы штиль , им уже пять лет , всю зиму бензопила , пролежала в сарае , сегодня 13 апреля 2022 года , завёл её с четвёртого раза.
Great job..Awsome idea with the metal tube for the oil its hidden and does the job...
No importa los mil likes malos!
Importa la creatividad que usaste y muy bien terminado
Me gustó tu taller tienes creo que lo básico no se ve en totalidad pero creo que ahí puedes hacer algo del ingenio que llevamos dentro 👍👍👍👍👍👍👍👍👍
Q
Jv
Your welding may leave a little to be desired, but your creativity and innovation skills are fantastic.
Witnessing the birth of a millionaire not just for the saw but for exposure to the world of the most effective bandaid, electrical tape.
Wicked job mate, well done!
The idea in itself is useless but the fabricating skills are superb!!!!!
Ну норм, только не забываем что в пиле есть система смазки цепи..
По старинке - ведро с отработкой 😀
@@user-dg9me6yw6v , ага чумазый сам деревья соседи и все вокруг)))) А так для бензореза вполне рабочая схема)
Видноже как пилит нехера бензо пила по мощнее
Он приделал что-то похожее (7:15...7:57).
The idea is very much unique and very smart creating a way to keep things going without throwing away that could be done just like that I love it
Well I give you credit for your ingenuity and I don't have a machine shop at my disposal but I do know how to buy a quality chainsaw, you know..... one that starts every time.
Wow,您的成品非常好! Nice job,LIKE!
Чел! Ты просто монстр! 👍👍👍👍
Great work 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍,I learned something new.
I liked, good job 👍👍👍
Lol haha he could've easily fix the engine 🤣 instead going through all this machine and manufacturing, most of us don't have access to these tools. But it was awesome.
Просто изуродовал 2 агрегата, и как там выше пишут, изобрел ВЕЛОСИПЕД. 🤣🤣🤣🤣🤣🤣🤣
And all you need is a lathe , a welder , skills to use both, loads of spare metal , taps and dies and a machine shop.
EASY PEASEY
Super tare Felicitări pentru tot
А может попробовать бензопилу отремонтировать?
Так это уже будет совсем другая история и не интересная
Он пилу отримонтирует и из неё триммер сделает
👍....
А 🤔 можно и так... можно и так! 🤭😀😀😀
Да согласен руки инструменты него есть но такая пила долго не прослужит без смазки он за губит цепь и шину
@@den260180 по поводу цепи и шины вспомните первые электрические пилы Парма у них не было смазки и приходилось в баночку с маслом кунать. А самоделка полная х....ня👎👎👎👎, потом из остатков пилы и косилки сделает триммер.
Wouldn't it be easier to clean and adjust the carburator and/or ignition system of the chainsaw?
Certainly it would be more safe and more compact than this construction....
Excellent job outstanding metal work
very cool congratulations
На мой взгляд проще отремонтировать пилу.... Из триммера сделать пилу а из пилы триммер ГЕНИАЛЬНО!!!!
Não tem freio de corrente, item de segurança obrigatório em moto-serras. Apesar de criativo no projeto, eu ainda acho mais viável consertar a moto-serra original. Abraço!
I've seen chainsaw became drill, concrete mixer and many, now grass cutter became chainsaw. Its cool
Wish I could do What you do.Would save me in repairs.
Good machine knowledge
👍
With all that engineering knowledge, tools and skill, would it not have been easier to just fix the chainsaw???
Yes, but actually Yes
One cannot train a pollak brain
Right? Lol
I thought it was a push mower engine adapted for chainsaw milling which would have been super useful
Sure it would have been easier. But someone who has this much skill and creativity just enjoys the build plus the satisfaction of knowing what you created/made actually works.
Muito bom!
Meus parabéns, gostei!
Great idea! 👍🏻 regards
Hello, it's a big chalange with a lot of tools and time used, the result is not safe, not strong, not durable, but you can be proud; you did it!
А я думаю проще было, самому бензопилу чинить🤦♂️
Из бензопилы он триммер сделает, он же мастер.
Not the single least dangerous homemade tool in CZcams history, but still a clever build. We featured this video on our homemade tools forum this week :)
obviously a mechanical engineer who knows how to design AND build. Good job! 👍👍👊👊
mechanical engineer? you give me too much credit
Genial. Lo. Que haces. Amigo les veo. Desde Chile!!
Maybe learning how to start a chainsaw would’ve been easier 🤷♂️ but I still giving jou an A for Afart okay!
It would have been easier to fix the saw. And it had a kickback brake.
I HATE KICKBACK THEY ARE STUPID
Love it dude.i would call it.'' Hell on a chain''.
Great job...
Теперь осталось научиться точить цепь.
Good work but maybe you forgot chain oil and safety break chain??
Yep you're right
Lubrication and braking ... I say that the tool is also unbalanced. I don't mention safety in operation because it doesn't exist.
Wow nice good job
Good job...!
Nice build, but it was much easier to repair your chainsaw!
I didnt do it because I needed too, I did it cos I can
How oiled the chainsaw ?
@@bacilluscereus1299 look at the handle that doesn't have the the trigger to accelerate the engine.
Que bueno gracias, is máster, saludos desde Costa Rica.
🌲🇹🇩 BRAVO NOTA 10 🌳
EU NU MA COMPLICAM CU ASA CEVA PRETENE CUMPARAM DRUJBA NOUA PREA MULT DE LUCRU SI COMPLICAT DAR AI ÎNȚELEPCIUNE ȘI MASINERI FOARTE BUNE SPOR LA TREABA 🇹🇩🌲🌳🌴
pretty funny instead of fixing the chainsaw which would have been more reliable. He puts it on a less reliable weed eater engine. With probably less horsepower. 12 minutes and 47 seconds I'll never get back
The donor saw is more reliable or does not matter less than the safety in operation. And the pain / life.
Теперь с пилы осталась триммер сделать...
Уже есть такое видео! . Тоже его 🤣🤣
С точки зрения потраченного времени и материала данная затея не целесообразна дешевле купить такую же китайскую пилу, она будет безопасней. А если посмотреть с другой стороны то это не плохой опыт в конструировании👍
Good job
Всего лишь один вопрос! Нахера этот геморой?
!gfh
Нахрена изобретать велосипед ежели отремонтировать можно пишу человеку делать не чего
Nice job
А чо триммер лучше пилы заводится 😁
8
Систему смазки цепи, я просмотрел штоль?
Плохо без смазки цепи !!!!! долго работать не будет......
да
Super idea
Нахера...???!!!
Отличный перевод
Все есть, даже токарный, а вот цепь на точить никак)
Nice video❤️
Nice video😍
Excellent achievement.
Bad idea. Putting it into practice is unwanted and harmful.
Members do not grow back ...
Some aspects:
- Heavy weight
- Lack of chain lubrication - low reliability
- High construction costs - a parker chainsaw (this is also the name of the ship on which they were assembled) is under $ 100
- Lack of any safety system - chain brake, chain stop
- Unbalanced - will tend to cut crookedly
- It requires great efforts in its safe and correct handling.
Do you want to hurt someone? Using such a tool ...
Seria mais simples consertar a serra original !
Great you spent more in labor and material than a new saw would cost,and ended up with a less powerful more dangerous saw
Когда коту нечего делать...
Он потом все-таки этот движок и будет от мопеда или мота ставить, и так до v8 дойдет.
И нафига спрашивается
@@spt-nv3766 oidiidia
Seria mais prático e barato comprar uma máquina nova
Keren Mr Broo ...
Very nice 👌
bem mais facil comprar uma moto serra nova,nao
Ahora comprara unha desbrozadora nova para facer unha motoserra...
Wow! Cool.👍👍
Saya orang Indonesia, saya suka video anda, saya suscreb Chanel anda, terimakasih...👍
Một người am hiểu về cơ khí chế tạo xin cảm ơn đã chia sẻ
¡Pues menuda maquina!; sin tensor de cadena, sin deposito de aceite para engrasar la cadena y lo mas importante sin freno de seguridad para la cadena.
Good idea
if only i had few extra tools. lathe ,pillar drill ,metal bender, tap and die set, mig welder etc. might be cheaper and faster to buy a new chainsaw, but good work.
Excellent work!!! 👍
The work is excellent, the idea is wrong so in vain.
Superb
Amazing
Good, i like it
Bravissimo 👍👍👍👍👍👍👍👍
Dude u bad ass for this one lol I would definitely buy one if I seen it in stores lol
I like your bench roller!
Hello cảm ơn bạn đã chia sẻ vì đeo hay quá 👍👍👍👍👍👍👍
Memang padu
Good one
와우! 천재!
그거 내 도! 정말 갖고 싶다.
진심이다.
เก่งหล่ายน้อช่าง/..สิตัดไม้มาเพสาก่อน/มื่อหน้าสิตัดหญ้า..จั่งแปลงเครี่องฮ่างตัดหญ้าเด้อ
You are certainly a fine fellow, but the weight has grown, and the saw is more intended for this!
WOW! Very nice. Just what the average guy can do in his garage.:(
Great !
Fantastic building skills! Way better than McGiver. But it is very difficult for me to understand why? Fix that one or Go get another chainsaw. You have every other correct tool for the job and are damn good with them.
searched ebay to find broken chainsaw
already have makita chainsaw
why did I do the build...
because it will be fun :D
Ну ты Молодец!👍👍👍👍👍✋
Все отлично! )))))) только потом придется из бензопилы состряпать газонакосилку ))))))))))
Genius !