How to Build a 350W FM Radio Station? A Complete Startup Guide
VloĆŸit
- Äas pĆidĂĄn 26. 06. 2024
- #FMUSER #fmbroadcasttransmitter #radiostationequipment
đ€ How to properly set up a 350W FM radio station in 20 minutes? Here is a simple display to help you out. Please Like & Subscribe if it is helpful!
âž Subscribe: / @fmuserbroadcast
âž 350W FM Radio Station Solution Index - fmuser.net/content/?1068.html
âž 150W FM Radio Station Solution Index - fmuser.net/content/?1075.html
âž Full Playlist - âą FMUSER FM Broadcast An...
Things have changed since then (hint: it's not easy to meet people face to face today than it was before, you know why!), and so make sure you watch this video about the ground plane antenna setting and then subscribe to us so you don't miss other interesting videos on our channel!
In the next 20 minutes, you will learn how to set up a 350W FM radio station and how to use some of the following radio station equipment, including:
1. Audio Mixer, Audio Mixer
2. 350W FM Broadcast Transmitter
3. Audio Source (MP3)
4. Mic, with a stand
5. Accessories
Things you should know ahead:
1. Basically, a higher setting place for the antenna means more coverage, so set up your antenna as higher as possible (don't forget the transmitter TPO!).
2. Always remember the well-connection between an antenna and an FM broadcast transmitter before power on, I'm pretty sure that you would not let your transmitter burn down to the ground because of the high VSWR of the antenna
=-=-= TIME STAMPS =-=-=
0:00 - What's On
0:50 - The Mixer Connection
2:28 - The Microphone Connection
5:37 - FM Transmitter Connection
9:58 - Audio Processor Connection
11:38- MP3 to Audio Mixer Connection
15:57 - Final Test
18:27 - Product Display
I'll be highlighting what you need to start with and explaining as carefully as I could for every single step in this video to make sure you guys understand fully.
By the way, contact us if you are in one of the following broadcasting needs:
- Community Radio Station
- Campus Radio Station
- Town Radio Station
- FM Radio Station of Any Kinds
- Supermarket Broadcasting
- Outdoor Advertisement Broadcasting
- Sports Events Broadcasting / Horse Races Broadcasting
- Conference Broadcasting
- Factory Broadcasting / Announcement
- Drive-in Church Events Broadcasting
- Concert Light Show Broadcasting
- Drive-in Theater Broadcasting / Car Theater Broadcasting
Keep Updated and Explore for More!
âž Subscribe: / @fmuserbroadcast
âž FMUSER High Power FM Transmitter Series
- âą FMUSER High Power FM T...
âž FMUSER Low Power FM Transmitter Series
- âą FMUSER Low Power FM Tr...
âž FMUSER Technical Support Series
- âą FMUSER Technical Suppo...
âž FMUSER FM Broadcast Antennas Review Series
- âą FMUSER FM Broadcast An...
âž FMUSER Studio to Transmitter Link Equipment Series
- âą FMUSER Studio to Trans...
âž FMUSER Live Streaming Solution Series
- âą Hotel IPTV Solution Tu...
Thanks for watching!
------------------------------
Welcome to FMUSER Broadcast - We are a dedicated content creator who makes radio broadcasting more accessible for every broadcaster and radio individual via product reviews, tutorials, guides, how-to videos, and more.
#FMUSER #fmbroadcasttransmitter #radiostationequipment - VÄda a technologie
Hi guys, welcome :)! Hope you enjoy this video and don't forget to like and subscribe. For more info on the details of the FMUSER 350W FM radio station, please visit fmuser.net/content/?1068.html. Anyway, make sure you guys have fun on our channel, we cover all your needs on radio broadcast equipment! Remember to leave your comment and let me know if this video is helpful, or let me know what you guy needs so that I can create more useful content for you. Here is what covers in this video:
0:00 - What's On
0:50 - The Mixer Connection
2:28 - The Microphone Connection
5:37 - FM Transmitter Connection
9:58 - Audio Processor Connection
11:38- MP3 to Audio Mixer Connection
15:57 - Final Test
18:27 - Product Display
Welcome you guy to follow our youtube channel:Rita Tsai to watch more videos we make if you like, thanks.
Hai mam I need complete details about prices and shipping ,and how many distance it may cover up to .Is it works only in open area or in hill stations like that please send me details to my email id (pilotsiva007@gmail.com)
@@user-ou1sr3of2r I need the same thing in canada
Do you have contact info.. I want to set up a radio station in new York. FM station
@@user-ou1sr3of2r Hi, friend, before making a suitable offer for you, could you please click this link:fmuser.net/content/?2081.html to fill the form about Question list for FM Radio Station? We will contact you soon once you complete the form.
It worked! I did it! I set it up and now im a national broadcaster! Thank you guys!
You are welcome, if you need to buy any FM and TV broadcasting equipment, please feel free to contact us via rita@fmuser.net or Whatsapp: +86 18613072427
GET A LICENCE
Hello
Whatâs ur radio show name?
This is a cute video, but I'm in the USA and formerly owned three licensed commercial stations; an FM station, and two AM stations. I would highly advise caution putting 350 watts on the air. If you cause interference to any licensed station or aircraft, the FCC will come looking for you and the fines are steep! (The aircraft band is just above the FM band)
Have fun, but be careful.
Thanks for your comment! You are right, in the United States and some other FCC regulated areas, to set up a radio station, especially a broadcast station with hundreds of watts, you must apply for a broadcast license, but in those countries and regions that are not under the control of the FCC, to set up a broadcasting station are relatively simpler and less expensive. . . By the way, in addition to radio transmitters, we also provide high-quality radio station equipment (FM/TV/AM). If you need for long-term business relationship, we could be your best choice! Anyway, please feel free to contact us: www.fmradiobroadcast.com/. Have a good day!
One need only cause economic interference to get a SWAT team from the fcc. The US government has seized the airwaves since 1913 and stolen them from the people.
I am just thrilled to see young people tinkering and experimenting with and learning and teaching and carrying on previous accumulated hands-on practical knowledge and skills like this! I am 52. I remember in the 1970s my father teaching me how to build my own radio receiver by wrapping a coil.
Wow, you have a great dad!
Its sad how the FCC frowns on low power FM its a lot of fun hobby broadcasting but with the 1 watt limit (part 15 rules ) your not getting far .
She sure does know her electronics! I always wanted to set up a station just like this one!!!
+Tom Coss This stuff is actually pretty basic. What they're hooking together here is just bare necessities.
+Tom Coss Hello,Tom. :) Thanks for watching. Are you interested in FM radio station?? May you can hit me up on Skype: rita.cai87 or by Email: hedy@cantonmade.com,that we can commmunicate further.
Best regards
No, she knows how to do a sales pitch - that's the purpose of this video. Some of the technical aspects here are completely wrong.
Professional audio processors from Omnia (a Telos Alliance brand) output audio in MPX format. You can connect an Omnia audio processor in the Aux connector.
Nice suggestion, Mark! Take a look at our FM transmitter packages if you're also interested:
âž 350W FM Radio Station Solution Index - fmuser.net/content/?1068.html
âž 150W FM Radio Station Solution Index - fmuser.net/content/?1075.html
Thanks you for helpings fm radio station setup
You are welcome, hope it's useful for you
Love this, THANK YOU!!
FMUSER is always willing to provide useful tutorials and such alike content for all of you. Welcome to subscribe to us and like this video!
So good... Liked Very muchâ€
Thank you. I really appreciate it.
You're welcome, Bernad! Don't forget to follow our CZcams channel, leave your comment below the videos or ask for a new topic, we are always listening!
For connecting anything audio, inputs connect to outputs, and outputs connect to inputs.
Very nice and informative video đđŻđŻđŻ
Thanks for your support, if you need any help please contact us by email: zoey.zhang@fmuser.net or Whatsapp/Wechat: +86 18319244009
Thanks
Fantastic
Good teacher
this is disappointing comment i love fm and i found fmuser from 5years ago. i try to buy fm transmitter but i can't buy due to money problem.. but still watching of your youtube videos. so i comment you to all videos as same for my disappointing feeling. and love you fmuser from Manipur. Iam lover of fm transmission from my childhood its may arround since 1994
thank you so much
Thanks for enjoying our video, we upload our new video, hope you will love it: czcams.com/video/cO_7pV_jvms/video.html
it is a good tutorial, keep it up.
Hi, Adebabay, thanks for the comment! If you're interested in more, welcome to like this video and subscribe to us: czcams.com/channels/er199-Yi70_QS2uj8P8WjQ.html. Have a good day, Adebabay!
Being a 30-year radio veteran myself, there are a number of things I wanted to point out about this video.
First, I realize English isn't her first language, but she keeps calling knobs "buttons." A "button" is something you push, like a doorbell. A "knob" is something you *turn*.
Another thing: it looked to me like she was instructing people to turn on the "phantom power" (that's the 48-volt button she pushed on the mixer) for a dynamic mic. You DO NOT DO THIS!! Condenser microphones are what need phantom power, NOT dynamic mics. I would NOT shoot 48 volts into a dynamic mic element as you risk frying it.
Also, that's a 350-watt FM transmitter. Depending on terrain and antenna height, that thing can throw a signal for a good 15-20 miles in all directions. I don't know where this video was shot, but if you're caught doing this in the U. S. without an FCC license, you risk a $10,000 fine for running a pirate radio station. Anything over Part 15 power without a license is illegal. A word of caution to those who don't know and are considering doing this.
+wannawatchu66 free people do not need licenses to take a piss.....if you like the idea of having a license i respect that but dont push your infringements onto me. as long as no one is being hurt in any way then theres no problem. I dont beleive in licenses. im not a slave and no one owns me.
Steve Lamperta Pushing infringements onto you? Been reading into what people say long?
All I did was point out what will happen if you're caught running this kind of power without a license in America because I've seen it happen to other people. Nothing more, nothing less. I didn't say I liked it or disliked it. It's the way it is. Read the last sentence of my post again if you have no problem feeling like a fool and/or being embarrassed at what you say. A guilty conscience needs no accuser, so I'm guessing you're running a pirate? I don't care what the hell you do, pal, so have fun when the Federal marshals show up at your door in the black Tahoe, confiscate your equipment, and the NOUO comes in the mail. It's *your* 10 grand, not mine.
+wannawatchu66 Thank you for the information that you have contributed, sir. You are absolutely right about the legalities of the intending process in the US. You know, surprisingly, these days, some manufacturers are making condenser mics that look like dynamic mics. I mean to say, they have the same body form as that of dynamic mics. I ran across a few. I actually don't care for them. I guess, I like the body of the traditional condenser mics, if I can say that. I'm not sure what type of mic she is using though. Having said all that, this was a fabulous presentation. She was excellent in covering in detail the process. Five stars and two thumbs up. Now, if only it was legal for us here in the US and I suppose the cost of all this is a pretty penny too for the average hobbyist. Nevertheless, great video, Hong and thanks again, wannawatchu66.
+wannawatchu66 Thank you for the information that you have contributed, sir. You are absolutely right about the legalities of the intending process in the US. You know, surprisingly, these days, some manufacturers are making condenser mics that look like dynamic mics. I mean to say, they have the same body form as that of dynamic mics. I ran across a few. I actually don't care for them. I guess, I like the body of the traditional condenser mics, if I can say that. I'm not sure what type of mic she is using though. Having said all that, this was a fabulous presentation. She was excellent in covering in detail the process. Five stars and two thumbs up. Now, if only it was legal for us here in the US and I suppose the cost of all this is a pretty penny too for the average hobbyist. Nevertheless, great video, Hong and thanks again, wannawatchu66.
***** I'm glad you're "not actually a jerk," because that's how you came off.
great to learn from u
Thanks for enjoying our video, here is our new video, welcome to take a look: czcams.com/video/cO_7pV_jvms/video.html
thank u
Thanks for enjoying our video, we upload a new video, welcome to take a look, hope you will love it: czcams.com/video/cO_7pV_jvms/video.html
Firstly, thank you for your easy step by step instructions and I love your voice.
I have worked on Radio Stations but, always wanted to run one of my own. The strange thing is that, the majority of the equipment you have shown here, I has already bought, although it was not my intention to buy the apparatus to create a Radio Station, but thanks to you, I believe I have almost everything needed; including the exact same Mixer, headphones, microphones, stands and anti pop filters. Just need two more pieces - The FM Transmitter and the Audio Processor. Which models would you recommend?
How far would the 350 Watt Transmitter reach?
Also, could you explain if an Antenna is needed so it can broadcast?
Thank you for your help
George West
Oh yes, what is the Audio Processor for? The Behringer PRO-XL MDX1600, I am finding hard to locate.
George West You're looking at a rather large (tall for distance) antenna as that is quite a powerful transmitter. Have a look at the link in the description.
350 Watt Transmitter can cover about 20-30km, it depends on the environment and the height of antenna installation.
This is our audio processor in the video, link:fmuser.net/content/?1224.html, are you looking for Behringer Compressor? Link: fmuser.net/content/?1474.html
@@professerclever You don't want one of those audio processors. They are not designed for and not suitable for FM broadcast. They are for recording studios and sound reinforcement. You need a proper broadcast processor or you risk over modulating and possibly being fined or shut down.
Love it
Thanks for your support
very nice video
Thanks Romeo! Still working hard to proceed our video.
I like that setup
Thanks, Desmond, we appreciate that. This 350W FM transmitter package is specially designed for FM radio stations to broadcast. You can find more info at fmuser.net/content/?1068.html. Have a good day, Desmond!
Just give me a rough estimate on the cost One simple FM radio broadcast transmitter and station studio
â@@desmondprobets275 Leave your e-mail,we will contact youïŒ
Thanks alot of your video
Hope you will enjoy our videos
@@fmuserbroadcast yes but i want to know can do like professional fm redio? I means like Fm radio channel?
@@ChakVoice Hi Chak, this is a complete radio station equipment, we can make a suitable proposal for you according to your budget. Would you like to build a professional radio station? If yes, we can help you, please feel free to contact us via Whatsapp: +86 18613072427 or Skype: rita.cai87 or Email: rita@fmuser.net
OMG ~ She's ADORABLE !
Dennis S ._.
._.
._.
._.
._
._.
._.
Sorry nothing to see here
*****
Dennis S bÀh.
*****
Yum yum...
Her T shirt reads "Lovely" LOL!
she really is...
i like the bop filter so i can empty some noise!
Yes, correct
eccellente!!!đ„đ
Hello, Dr.Wezi! Sorry for not replying in time. Thanks for your comment, we also cover videos of other radio station equipment in our channel such as the installation of the FM antenna and how studio transmitter links work, please enjoy your time and have a good day!
One thing she did not show, how to switch EQ settings (depending on where this transmitter is used, you will have to select between 50 or 75 microsecond equilation).
Outstanding tutorial. Very well done.
Thanks
It can be heard in car FM and phone FM radios
350 watts is asking for trouble from FCC. Get a small 1 watt transmitter or less to keep from causing interference ! CZH-FM7C on LOW does 1 watt well.
Hello james, i wish to talk to you about FM Radio transmission knowledge & skills. Am based in Kampala Uganda in East Africa and my email is; Hope to read U soon for further details.
Welcome to watch our new video about CZH-7C 7W fm transmitter: czcams.com/video/DIIcm5GdNPM/video.html
As a former radio person, please be aware that most countries have laws regarding the operation of radio stations with varying levels of strictness. As this lady is in China, itâs worth noting that the CCP takes strong exception to non-state controlled broadcasters
i have a broadcasta and i will like to get one of this how mile dose it work
This is NOT legal! An FCC license IS required (unless you have a low frequency where you are not broadcasting outside your local neighborhood).
Fuck the FCC
Muy interesante informaciĂłn para hacer las conexiones bien que todo funcione como debe de ser...gracias...JesĂșs de P.R
Gracias por su comentario, Alejandro, todavĂa estamos trabajando en nuestro contenido, ÂĄbienvenido a que me guste este video y suscrĂbase por mĂĄs! AquĂ estĂĄ nuestro nuevo video sobre cĂłmo usar una carga ficticia RF para las pruebas, visite amablemente: czcams.com/video/32pudcr6ftu/video.html.
Si estoy suscrito .porque quiero ver uno de la instalaciĂłn de antenas, para mi transmisor Fmuser..muy buen equipo por cierto...
@@alejandrojesusenriquealeja8392 ÂĄMuy apreciado, Alejandro!
Saludos amigo...una pregunta como se le llama la pequeña pieza de color verde que utilizan para la frecuencia...
@@alejandrojesusenriquealeja8392 En inglés, se llama "the Amplifier Board", "la placa del amplificador".
Can I connect my processor without using transmitter please
Hello can you send me a quotation for the whole equipment
can you tell me the name brand of this speaker it looks really nice and where i could buy it
Hi, Tony! Thanks for your comment! This high-quality speaker is from FMUSER, and you can find it at fmuser.net/content/?1068.html. Enjoy your time!
@@fmuserbroadcast thank you
very interesting I like this I ask you now how I order all of this? can you help me to bring all of this for me
Hi Richard, thanks for your comment, we appreciate it!
For the information in detail, please visit fmuser.net/content/?1068.html.
You may place your order directly on the website or if you would like to discuss more of this product, please contact me on Whatsapp/Wechat: +86 18319244009. Looking forward to your reply and have a good day!
hello I'm from Canada so I want to know do you have device that it cover FM frequency whole of Toronto thanks
OMG, Javad, I didn't notice your comment, sorry for that! Well, if you would like to use any broadcast equipment to cover FM frequency whole of your country, sure we can help, can I have your work email so that I can contact you? Or, could you please contact me in Whatsapp/Wechat: +86 18319244009 or Email: zoey.zhang@fmuser.net
By the way, the frequency covering depends on whether the RF channels (like 98Mhz or 97.9Mhz, etc) are occupied. Theorotically speaking, you can use any frequency channel if it was legal in your country.
Just a comment on the audio processor. This is not a true broadcast limiter. It is designed for audio work, recording, sound reinforcement etc. There is a lot more to processing an FM signal than what this unit can do, so it will not be effective. It is better than nothing, but it is not designed for on-air processing. Proper processors like the Deva, Orban Optimod, Omnia 6 FM, Innovonics David IV, Wheatstone FM-55 etc are what should be used. I am a radio broadcast engineer.
How do I set up a public telephone call on my radio station
cool how much all of this will cost US$ and from i can buy online and delivered, very good review thx
+Hong Hedy how far does it go
not sure of the distance it varies with transmitter
Hi you can contact us via rita@fmuser.net or Whatsapp: +86 18613072427
Cool , but one day you should learn us how to make those stuff and equipments , if you will
Ok, thanks
What's the radius in km and where can I get this kit? It will help many
If you want to buy the whole package in the video, please click the link below:www.fmuser.net/content/?1068.html
I just want to know how much the transmitter is, looks nice, 350 watts, not bad. We really need to know the price
David allen Could you give me your Email addressïŒWe can give you more information about the prices.Also, you can contact me :hedy@cantonmade.com
You didnt show your antenna set up. What kind of station are you running? Is it a legal commercial station? Community station?
Hi, McArthur, thanks for the comment! Actually this a tutorial video shoot in our office for beginners and it was made a very long time ago, and yes the transmission equipment and radio studio equipment are legal, the FM radio transmitter used in this video didn't connect to an antenna or a dummy load, so I guess it is legal? All these equipment are produced for a 350W FM radio station though.
Thanks for the video mam !! but please tell me how can we fix our rf antina of our transmitter??
What's wrong with your antenna?
were do I buy all the equipment to start and how do I send threw internet signal
Hi you can contact us via rita@fmuser.net or Whatsapp: +86 18613072427
Please can I get a price summary of the equipments used in this video to help me estimate the cost of the setup?
Sure, Chief! If you're launching a new FM radio station, we would love to give you a hand. Talk to our expert via Email: zoey.zhang@fmuser.net or via WhatsApp: +86 18319244009.
Here are two of our most popular FM radio station packages, please click the link below and visit for details:
âž 350W FM Radio Station: fmuser.net/content/?1068.html
âž 150W FM Radio Station: fmuser.net/content/?1075.html
Have a good day, Chief!
hello i want to know the price for all of this that you used but double headphones please :) thx
Hong Hedy hello nice job this is my email too i need to know about the price and also your location
Hong Hedy PLS. KINDLY INBOX LIST OF EQUIPMENT PRICES AND SHIPPING FEE INTO NIGERIA. eze_frank2003@yahoo.com
How to record tv program on audio cassette player
Ok, please check your mailbox.
Ok, please check your mailbox.
good
Thank you for enjoying our video, here is our new video: czcams.com/video/cO_7pV_jvms/video.html
NIN HAO ! WO XIHUAN ZHE GE DIAN TAI DE SHIWEI SHI HEN HAO . I LIKE THIS RADIO STATION DEMONSTRATION .PEOPLE WHO WANTED A RADIO STATION SHOULD WATCH THIS AND LEAVE A REASONABLE COMMENT.I USE TO HAD ONE BACK IN THE DAY IN MY NEIGHBORHOOD WITH PLENTY LISTENERS .BUT NOWDAYS , THE FCC IS TOO STRICT NOW ABOUT OPERATION PERMITS . SO BE SURE TO FIND OUT FIRST . YOURES TRUELY - " 89.1 FM THE CLARKE " IN HOUSTON TEXAS .ZAI JIAN ! P. S - HOW ABOUT HOW TO CONNECT THE ANTENNA ,PLACEMENT OF IT AND DOING AN AREA SURVEY FOR SIGNAL COVERAGE .
Thanks, you can contact us via rita@fmuser.net for more information.
Mannn..If That RF Transmitter outputs 350watts Raw power & She Houses That RF Transmitter In the Same Room , Thats Some Serious Radiation. Usually Transmitters Are Closed Off or Housed in a remote Location away somewhere else..
Its in a heavy aluminum case we have one no problems cant get a frequency counter/ watt meter to show its output unless we go out side standing away from the tower My ham unit is 2 KW I don't glow LOL Just don't have the antenna in the same room !
Thank you for your contribution. This wannawatchu66 guy just wants to criticize you. I understood everything what you are saying. This video is about setting up a radio station. Of course you must get a license for certain power levels. Whether she calls a knob a button or a button a knob, you perfectly understands what she is pointing to. Stop trying to diminish her positive contribution! I appreciate her!
No, that guy wants you to know the true facts, idiot!
Keep your mouth shut boy! I'm not your idiot!
Hi Omar, thanks for your encouragement, now we upload a new video, is it better than before? czcams.com/video/cO_7pV_jvms/video.html
Thanks for your comment, we will try to improve our English speaking.
May i know how far or what is range of the 350 watts fm transmitter?
Sure, Babylon. The one in the video is able to cover a range of 10-20 KM. If you're looking for more information about FM radio broadcast equipment, please do not hesitate to contact me by Whatsapp/Wechat: +86 18319244009 or by Email: zoey.zhang@fmuser.net. We appreciate your comment and wish you a good day, Babylon!
can you load another video showing how you work it ... thanks and is any one selling a transmitter ?
Yes, we are the seller, please contact us via rita@fmuser.net for more information.
Hi Juan, you can watch our new video:czcams.com/video/cO_7pV_jvms/video.html
What if you have a studio speaker can you do it with it too please
Hello~ Yes, this video share how to build FM radio station.
hi ! how to stabilize temperature ?
Hi Anne, you can try to add air conditioner to cool down the transmitter, is the transmitter very hot now?
You talk about using an mp3 player with the radio station equipment, but what if i want to use a cd player or a turntable?
connect those in the mixer.
Great!
whats the range of the a station like this and does it need an external antenna?
This is a package of 350w fm transmitter and in open area, it might transmit about 15-20km with the antenna putting 20 meters or higher from ground.
Rita can upgrade to 50-100 km open area? an how much cost?
does this still work in 2019
Hi Nick, you can contact us for a new package via Email: zoey.zhang@fmuser.net or Whatsapp/Wechat: +86 18319244009
Yes it does still work. Although do not use more than 0.1 watts if you are in the United States, or you will be visited by US marshals on behalf of the FCC.
what about studio on air light ,,when mic is on the on air light automatically comes on
The mixer shown in this video won't allow it. You need a mixer that has a mic tally output. It switches a relay when the mic is on and also mutes the studio speakers so you don't get feedback. This video is very misleading for many reasons. It's only done to sell their products.
How much did all these cost you?
Can you please list all the material name ?
Thank you bb
Share the list and where to Buy please?
What is the frequency to listen ???
Can we set our own frequency like FM 101 or FM 106 etc
Hi Sohail, if there are radio stations with the same frequency around you, your signals may be disturbed.
In the United States you have to apply for a FM radio license to broadcast first.
éćžžć„œçè±èŻćŁèŻ
è°ąè°ąïŒ
Nice video. äœ çè±æé©Źé©Źèèććć
hahahaha
Thanks , Please how I can buy all itmes
and you can tell me the price
please write us email to rita@fmuser.net for more details.
Turnkey shop in london
How your know what frequency your radio station is ?
You'll need to apply for a license and that document will show you what frequency for use.
hey
Rita Cai do you have any info on applying for license and is it hard ?
How much is the price and how do i get some I'm here in UK
Hi Charles, you can click this link for more details: www.fmuser.net/content/?1068.html , any question please feel free to contact us via Email: rita@fmuser.net or Skype: rita.cai87 or Whatsapp: +86 18613072427
how do you setup the antenna???
HI MEM, you can check this antenna installation diagram: fmuser.net/content/?2030.html
Please how to get ur own frequency with these items
You set it yourself that knob has a menu of all its functions find a un used one and be 2 clicks on ether side from a big station in use so you do not interfere with any one .
how much does it cost? very easy to connect
Yes, do you want to build one? You can contact us via rita@fmuser.net or Whatsapp: +86 18613072427
what is the actual range distance does this frequency transmit?
Dimy Etienne Range is more dependent on terrain than wattage, but at a relatively high elevation with no obstruction you could probably get like 30 miles reliably.
You'd need a license in the US for a station with this power level
what is the actual price for this transmitter then?
Hloy Hesit Yep. And a sizable antenna load for that type of power unless one is excited by the 'magic smoke' lol
Hi Dimy, this is the link of the whole Studio Package in the video, www.fmuser.net/content/?1068.html, or you can contact us via Email: rita@fmuser.net or Whatsapp: +86 18613072427 or Skype: rita.cai87
Good pm can you provide me a quotation of the whole items?
Ok sir this my contact details www.fmuser.net/about/?8.html
Did the lady say 50 watts...or 350 watts output on that transmitter? If she said 350, man...we are talking serious range! I doubt that anybody in the US could buy anything over 5 watts from a reputable dealer without a FCC CP to start or modify facilities...and that's past FCC R&R Part 15 power. Even transmitter exciters usually max at 55 watts.
King Bee Right you are, your Excellency. Actually, you CAN *buy* any transmitter you want; it's turning it on that's the problem. Without that "note from Daddy," yeah, you're (as I posted above) looking at (if caught) a $10k fine, and they'll document it and it'll come up should you decide to build a legit station.
It's 350w power output :)
where and how much for all these equipment?
Thanks :) You can contact us via rita@fmuser.net for more information.
Can you help me to get all these device in India
Hi La, that's for sure, we supply radio station equipment to the global market. If you would like to know more about the product displayed in this video, here is how you can get to it: contact our sales team zoey.zhang@fmuser.net or visit this page directly fmuser.net/content/?1068.html to learn more about the price and shipment.
How much costs this all equipment and why you need audio processor? :)
The audio processor is used to beautify the sound and make it more gentle.Can i get your email address?so that i can know more about your need and make offer for you.
I have my own internet radio station and i'm very interested in radio stations and i want to know all about them...maybe in future i will have my own radio station on frequency....but what if you use a proffesional program for radio broadcasting and it has automatic audio proccesor and compresss the sound to be better :)
sincerely,
vane
Lamba Struja www.fmuser.net/content/?1068.html here shows you some equipment of the radio station for your reference.and you can cantact to me for futhere information:www.fmuser.net/about/?8.html
Try stereo tools,
Lamba Struja An audio processor, depending on which one you use, enables you to tailor your station's audio quality. If you like a lot of bottom end, or crispness in your sound, or both, you can set the processor accordingly. Also, good processors have compression and limiting, which are worth their weight in gold because they minimize things you don't want, like distortion. But then, even a high-end processor (like an Optimod) can only do so much. If you run really hot levels and your audio comes out of the board distorted, your audio will be distorted. You may not *hear* the distortion, but if you put the audio on an oscilloscope, you'll see it.
How much all of this cost US $ .Can you tell me plzzz .....Good job thank you
You can contact us via rita@fmuser.net for more information.
what is the coverage area in radious?
Hello Peter, It depends on your transmitter power.
Depends on height of antenna.
â@@andyboss8795 Yes, this is one of the reason.
how I can get it may you send to me the price. I am in NY.inUSA
+Onick Bouquet Could you please give me your Email addressïŒI can give you more information about the prices.Also, you can contact me :hedy@cantonmade.com
Hong Hedy can you sent me a email about these products?
@@fmuserbroadcast can you send the price for this package
Deesa land you in hoosegow, yes?
No, we are from China
how much is the total package
Hi dear, you can contact us by Email: zoey.zhang@fmuser.net or Whatsapp/Wechat: +86 18319244009
how much its range and total cost ?
Hi, Neel, for more details please contact us via rita@fmuser.net or Whatsapp: +86 18613072427
This is great but how does this you broadcast over the radio? Not being critical, i'm new and i don't see how this help you set up a radio station, seems you will be talking to yourself.
This video want to help you build a radio station, and if you want to learn broadcast, you should watch other video!
How can I get this material
Hi , we can offer the whole package for you, please contcat us at rita@fmuser.net
how range sginal i wanna 50w fm transmiture
we posted the video and we well this package, you can contact us via rita@fmuser.net for more information.
Hi you can contact us via rita@fmuser.net or Whatsapp: +86 18613072427
please supply in nepal for New Fm radio
Hi Naba, what can I do for you?
Hi, I want all these , Can u send me full details.
ŰÙÙŰŻ ŰÙ ÙŰ±Ű§ŰšÙ Ű§ÙŰłÙÙ Ű±Ù ŰÙۧÙÙ 20000 ÙÙ۱Ù
Hi, you can contact us via rita@fmuser.net or Whatsapp: +86 18613072427
We are a producer of FM/TV transmitters and broadcasting products, with new technology and great prices, follow our CZcams channel to see our products and how they work.
since 1996, and we have customers all around the world.
www.onair.com.tr
Email: sales@onair.com.tr
350w? (more like 100 if you're lucky) of sproggy nasty output. Chinese TX's are notoriously bad and usually use the same chip as an MP3 FM cheapo transmitter for the frequency generation and stereo encoding, all that crap is then amplified (unfiltered) and causes havoc when it leaves the antenna.
+TheOptimod Right...NO harmonic filtering, NO bandpass filtering, NO frequency stabilization circuits-you may hear yourself 4 or 5 places on the FM band! NOT GOOD...
Free Radio Berkeley your best source for this stuff in the usa
Hi Barry, have you bought TX from China? Which company did you buy from?
This video should be titled 'How to Quickly Get an Rather Unfortunate Surprise Visit from the FCC' because the instructions in this video straightaway promotes illegal operations within the FM broadcast band at grossly excessive power output levels. Secondly this video fails to address the importance of audio processing so as to have control of modulation and loudness levels for the transmitter. This puts the user at risk of causing splatter and very harmful interference to other channels across the band as well as into other devices. Hobby broadcasting is a privilege granted by the FCC and other authorities abroad that is not to exceed a very low power level and any broadcaster has the responsibility to ensure any FM signal they are generating is clean and within authoritative parameters and guidelines.
Wow, your ideas are so constructive, thanks for that, we'll try to fix that! For this video, we would more like demonstrate to some of our customers on how to simply build THEIR stations with our equipment, especially for the customers from the non-FCC countries. As for the FCC areas, we do know that (and thanks for reminding again) the transmitter output power restrictions, that's probably why we didn't mention "In Every Country" in the title. Anyway, thanks for your comments, we will be promoting our content!
Hi.
Can I start it with USD 1500?
Thanks
Hello, I hope you have a good day. I am sorry and i can not do this. Thank you for your interest in our products. If you have any problem, we wish you to send messages to us.
Yes you can start up with that amount of money
don't you need to pay for the radio channel and approved by the FCC before you even set it up? I heard it's in thousands of dollars before you're allowed a 1 hour of radio channel time and it depends how many people you wanted to reach in your county or town.
You shouold check the local rules and different place has different rules.^^
FMUSER ZOEY i didnât know youâre not in America but youâre in China. Thanks for the information.
@@baakmee ^^ Thank you for your caring~
@@fmuserbroadcast In the United States there are no "different rules in different areas". You are either licensed for operation by the FCC or you are going to be visited and fined heavily if not arrested. We spent over a quarter of a million dollars to get ours on the air. It's not cheap nor as easy as this video makes it out to be. To my friends in the USA... do not do this.
@@wsvmradio6875 Hi WSVM Radio, this is Ray Chan! First of all, thank you for your comment and your valuable sharing about FCC, this helps us a lot to improve our CZcams video quality, sincerely appreciate it! But it has to be mentioned that since there are many countries and areas in the world that are not under the jurisdiction of the FCC, the broadcasting rules and the familiarity with broadcasting knowledge there are not as perfect as your country. And that's exactly why we're trying to help people from these countries solve some of the real problems they often face of. Maybe it's because we didn't mention what you said in the video (MY BAD), we are still constantly improving the quality of our videos to meet the needs of people all over the world! Finally, thank you again for your valuable sharing and have a nice day, WSVM Radio!
A couple of things you gotta know The HILLY ones are awful We bought a unit from a reseller in California it looks just like this one it cost much more but he imports the units puts them in his shop and debugs them does a 2 day running test to make sure its not drifting and sounds right and has great tech support and can service it if needed Also I have heard stories or people buying them from China and customs intercepting them the buyer loosing there money the FCC is pushing the seizure of imported equipment There are US sellers so look them up . !!
Yes, we have advantage both in price and service. Besides, we ensure best quality and price for the same product in the market. Next time you can choose us đ
i what that how much can it cost to kenya
Hello~ www.fmuser.net/content/?1068.html This is the product's link and the price is 4269USD=453686.95KES
how much will this cost in uk pounds
Hi you can contact us via rita@fmuser.net or Whatsapp: +86 18613072427
i need fm 300w transmitter
Ok, your email is presssuresh11@gmail.com, right? I will sent email to you, please check your mailbox later.