Bobcat Kubota engine failure, teardown, and prep for rebuild.
Vložit
- čas přidán 25. 08. 2024
- Bobcat 773 with the Kubota V2203 engine needs a rebuild. Stay tuned for the complete rebuild video!
Engine Kit - www.fridaypart...
www.4tetradgro...
Tools We Use:
Hydraulic Cylinder Spanner amzn.to/3SAlHYw
Another Spanner Option amzn.to/3LR1JFb
Hydraulic Seal Clasper www.4tetradgro...
Hydraulic Seal Stretcher www.4tetradgro...
Injector Block Off Cap www.4tetradgro...
Bobcat Fuel Filter Bowl Wrench www.4tetradgro...
Wrench Extender amzn.to/3Yt2yvl
Spring Compressor Tool amzn.to/4fA030n
Hydraulic Seal Installation Kit amzn.to/3Yrs6sV
Hand Impact Tool amzn.to/3Sz0yOk
Common Rail Fuel Injector Test Kit amzn.to/4dasD6T
Injector Leak Back Test Kit amzn.to/46Btf3i
Electrical Supplies:
Milwaukee Solder Iron amzn.to/4dpp0cY
Tesa Harness Tape amzn.to/3SAdG60
X Fasten Harness Tape amzn.to/4cbItNA
Non-Insulated Terminals amzn.to/4dp18XH
Short / Open Tester Power Probe amzn.to/3WRdrpu
Power Probe Master Kit amzn.to/3WPETUR
Shop Supplies:
Gloveworks Nitrile Gloves amzn.to/3WADdwW
Oil Absorbent Pads amzn.to/4ckYq48
Absorbent Pads amzn.to/3WOX64P
Brake Cleaner (Its Really Good) amzn.to/3yse3sA
No time lapse please. Seeing exactly what you're doing is what we're here for! Let's see the teardown, the re-sleeving, etc. Sure it will be longer videos but so what. You'll get more watch time and we'll get more pertinent training and information.
Thanks for the feedback, I shouldn't assume the teardown is the easy part. The assembly video will be very detailed. Thanks again
I like his videos but that time lapse stuff sucks. They do same thing in stump grinding videos
I would watch hours of videos of stuff like this. Keep it up!
I just threw a rod on my 7753 with the V2203 engine. Sadly it sits atop of my hill away from any warm garage. I think it is a spring time engine replacement.
I agree with a previous post. No time lapse. I watch all your videos and enjoy watching you fix stuff. I didn't get to see that with time lapse.
I have a kubot d1105 last mechanic never put in 2 of the precumbustion cups that go in before the injector after fixing his mistake im noticing diesel slowly still leaking from the fuel rail on each injector any thoughts??
I have s650 bobcat with a v3307 Kubota engine.
It overheated but could not see where any antifreeze had leaked out.
I filled the cooling system and let it sit overnight.
The next day, I checked the fluid level, and it was way low. So, I filled the cooling system again.
Not thinking that the water drained into oil pan. When I started the engine, white smoke came out of the exhaust.
I did get it shut down in time before it ruined the engine.
I figured that it must be either a cracked head or a head gasket.
Had head magnafluxed and had it shaved down.
Reinstalled the with new gasket.
I started the engine and coolant leaked back into the oil pan.
Guess I'm wondering where the coolant is leaking into the oil pan?
I ended up putting a remanafacterd engine in it.
I am also wondering if you think I should overhaul the engine?
I'm sure that the bottom of the engine is okay.
It has about 2200 hours on it.
Pressure test the engine oil cooler
@tetradgroup I installed the remanafacterd engine, and it runs well. It hasn't lost any coolant.
This is one of my favorite youtube channels! I have a question for you, and I'm not sure where to ask it. I own a 2021 t450, any idea why it wouldn't be getting up to full rpm while in 2nd speed (rabit mode)? I also notice when I'm moving my bucket up and down while driving in normal speed that i slow down slightly. Is this normal? APX 900 hours.
Any good reputable sources you would recommend for a reman engine?
I have a Kubota 763 the engine is taken apart is there any way I can bring it by you or meet you so you can possibly rebuilt it? I Can travel.
I'm in Utah but I would love to build it for you
I’m here in California but don’t mind driving to you I’m interested in letting you work on it is there anyway I can join you on the process of the rebuild if that’s okay with you.
How can I reach to you do you have a Facebook or Instagram so we can communicate set a schedule.
www.4tetradgroup.com or 4tetradgroup@gmail.com
I just sent you a message see if you received it. It starts with Felix
Здравствуйте! У вас есть мануал по ремонту 725 бобкат TCM
What's the cost?
Are you training some young Dudes or employees
The young dudes are employees, they are very eager to learn and hard working. We are blessed to have some amazing employees working with us.
@@tetradgroup Nice to see young people getting in the trades Love It!
Hello, bravo colleagues.
Cool job and cool channel
Curious how many hours the engine had?
This machine has around 3000 hours. A bad injector took out one piston and I assume due to massive amount oil consumption the other spun a rod bearing.