I’ve waited for us to finally see the system actually boot up and the first system test to happen. Now that it’s here i’m happy hope to see more in the future!
Really cool, the system looks great. You are lucky to have such a supportive family. Was wonderful to see your mother get involved... What I really admire is your enthusiasm and passion for the subject, and your skills... I can't wait to see what comes next! In the UK our domestic security system (an Eaton i-on-40H panel) has smoke detectors linked to it and is connected to a monitoring company, so the fire brigade would be called if they went off. We have to pay a security company to maintain it though, plus the monthly monitoring subscription etc. Keep up the good work!
Thank you. monitoring companies do not except residential customers here anymore you can be monitored but it is only them sending you a message if there is a alarm so no different than myself monitored set up I use in the garage system
Great work through out the videos from first fix to power and programmed up and testing Hope the family can manage to cancelling a False alarms when you not in the House.
Congratulations Nic, I am beyond impressed. This is the best system ever!! Also very likely the first true commercial home system as everything is spot on. I love how there’s a zone marked “Nic’s Room” Also it’s definitely not the volume that upsets Ayla but rather the frequency as humans can only pick up a max range of 2300 hz whereas dogs can hear up to 4500 hz max and I believe that trouble sounder is somewhere between 22-3000 depending on distance. (Note how the low frequency sounder does not cause upset) As for the next episode you should do a “crappy smoke alarm” durability testing with Hayden. I love those
Glad the Auto program worked! (after tweaking shit lmao) If I wasnt in Texas I would been more than happy to use my Verifire acct to program for ya. Great install man!! My plans for my house is a smoke with LF sounder bases and strobe in each room (like a hotel). Heats in the garage, laundry and kitchen. My corridors are large so at least 2 smokes in them lol. Ive noticed lately that a lot of detectors have been going bad with Notifier since they switched manufacture plants, glad you got them replaced though! We've been sending back a bunch of them too. Love the video as always man!
Hahaha I Love how your mom said i want todo it with the pullstation @ 39:03 that's something I would say and do as well if it's something new to me LOL Congrats on your New Home Fire Alarm System I Love your Videos keep up the Awesome Work.
Very nice system, also very functional, it is so much better than those unreliable smoke alarms, i do recommend that you install CO alarms if you have any gas appliances
@@nics-systems-electricif there’s no danger of CO in your house then it’s all good, and by CO alarms i meant something like First Alert residential units, First Alert is a reliable brand, it’s what i use in my house
@@NyxKemo yes there's no gas I'm trying to get away from the residential style of devices so I would likely put in something with the main system if I had to
@@nics-systems-electric a cheaper alternative to addressable ones is probably a monitor module with a System Sensor CO12/24A if ever you need to add CO detection
Can’t wait to see the full system test, you did a great job and I enjoyed the series so far. Also, Honeywell did an investor’s conference earlier this year where they showed off they were going to have LED L-Series, where they were going to have a T3/T4 setting. When they come out, do you think you’ll replace the current signals of you add CO detection to the system?
Likely not I find the LED devices really ugly and I don't require any CO detection in this building as there is no hazard of it I'd have to see how the new settings work obviously I need to run more wires but I guess it's not a global setting I'd assume and it can do two different separate tones once installed
@@nics-systems-electric yeah, LED devices are pretty ugly compared to xenon devices. Also, it’s weird to see the slight differences between Canadian and American codes. Here, CO is required in all homes in the majority of states. As for the wiring, if it’s anything like Wheelock’s Eluxa line, it’ll use synchronization pulses to differentiate which of the two tones to output. On the T3/T4 setting, the Eluxa uses T3 when receiving the silence sync signal, and T4 when receiving the audible sync signal. Obviously, it wouldn’t be compatible with legacy systems, it it does save wire running costs for retrofit and new installs.
@@HenBasketFireAlarms OK that is interesting as for those devices. CO detection is not required if there's no gas service to the house or any CO producing gas
The system looks awesome! Good job. Looking forward to future system tests. One question though: Why did you put a different sounding horn in the garage? The system still sounds great but I would have thought you would have wanted the sound to be in sync. But it's no big deal at all. You've done an excellent job with this project. Keep up the good work.
Just as a habit from installing lots of Honeywell addressable devices, I think it is best practice to rotate the rotary wheels fully in each direction before setting address. Had a school with similar issues of double addresses from smokes on a new install. Spinning the rotary wheels solved it. I train all my helpers to do it. I don't have much experience with notifier other than older stuff but been installing farenhyt and gamewell fci for a little over five years.
Yeah for sure that's what I meant when I said wiping the dials just spitting them back-and-forth to make sure it's making right contact with the right spot
I’m currently working on my 4100U basement system. About to start the mapping out all the device locations so that i can rough em in and program the system
This is great. How come you had a lot of left over devices and what was the small bases supposed to be used for. Do you remember why the panel didn’t like those 3 devices. Can’t wait for the testing next Saturday. Also can’t wait for the expansions which will probably happen in months. How come you didn’t do a burg panel with a few smokes. Keep up the great work!
A few extra devices to do any other expansions the small bases were sent along with all the smoke detectors I ordered not sure what you're supposed to use them on as they don't fit on a standard 4 inch octagon box
pro tip: use the next/previous selection buttons while programming instead of doing detector and address (instead of detector 001, est, detector 002; do detector 001, esc, next selection) also, all your heats are on Z01, photo's are on Z03, and pulls are Z04. also also, you were using the short name field for naming, you use the thing that says DETECTOR ADDR for full name, and that field next to the zones are for the "short" name.
Yeah that is a good tip not sure why I was doing that the naming has been changed just needed something temporarily until I could get around to name everything properly
Thank you. I would if there was a danger of it but for their extremely expensive cost for the addressable units when there is no danger I cannot justify it.
Hey if you want to do furnace shutdown, I believe one of the easiest ways would be to attach the red 24VAC wire running to the thermostat to a normally closed alarm relay, when the alarm goes off, it will cut the low voltage power which is responsible for sending the control signals to the HVAC system.
@@nics-systems-electric I've installed a ton of pull stations next to annunciators, and never had any pushback for them being level at the bottom to the relevant code. Code generally states that a device shall not be installed GREATER than x" AFF.
Sometimes there are little bugs in the program that just have issues with certain devices set to certain addresses. It even happens on the old AFP style panel. For example, my AFP-200 Stopped liking the address 1D001 for whatever reason. Couldn’t fix the issue with any model detector. So I swapped it to 1D007 and it worked fine. Sometimes if you set stuff in the program wrong, the panel has a fit. But it’s definitely not you.
Security systems are terrible. the NFW 50 would work if I owned one however the 320 is obviously the better more capable panel offering more features and more total power and can run flashscan whereas the NFW - 50 X is only litespeed and clip and devices are harder to find
In the us or at least here in California if you have a apartment or hotel. You have to keep the residential smoke detectors. Even though you have the commercial system installed. You cant remove them. Some places i have seen they will monitor the independent smoke detectors. Never figured out why that is i think that is building code.
That is common if the system does not protect the individual units it's getting more and more common to have directors and sounder bases from one main system zoned separately to the individual units
For the ones that were taking 2 addresses, are they possibly dual-function Smoke & Heat detectors? maybe each sensor using a separate address. Not sure otherwise how that would happen but I know there are some like that out there
@@nics-systems-electric Cool, yeah I didn't know but was just wondering since that is such a weird thing to happen, and those kind of problems can be the worst to figure out
What does the alarm sound from the outside? Also it would be cool to add a bell outside the house to hear the alarm outside of the house. Cool system though I enjoy these videos 😁
you should get an acm-24at, it connects via the eia-485 bus and it would fill in the blank panel you have to the left of your kdm-r2, you then would also be in compliance of the zone annunciation code canada has, it needs verifier tools and i know you dont have that but i might be able to get it for you
It would satisfy the code requiring zone annunciation not that it's required for my house but if it was it would satisfy that however not at the panel it would need to be at the annunciator and yes the problem is requiring verifier tools
No monitoring companies do not accept residential customers other than sending you a notification so no different than my "self monitored" system in the garage which I will likely do in the house
I don’t know why but the low frequency l series reminds me of voice evac, also you should durability test the smoke detectors that didn’t work with the panel
The Canadian version being federal pioneer has the same problems as the federal Pacific version in the US with high failure rates when it comes to overcurrent protection they are the same stab lok breaker in both countries
On your air handler shutdown just interrupt "R" on the thermostat wiring. If the condensate pump was installed with the overflow safety wired it should be interrupting the same just put in series. Some of the higher end Trane/American Standard equipment like yours will have an SD or S/D terminal and you can just short it. You could also install a shunt trip breaker but they're kinda pricey.
The HVAC shutdown is already done I ended up having to do it twice with the second time shutting down a relay interrupting power to the board and the blower not sure if you can find a shunt trip breaker for a home line panel but you could find a contractor either way it would be large as you need one rated at 100 A
@@nics-systems-electric I don't recall ever seeing shunt trip in residential panels either. What you did works too. The R terminal is 24VAC to the thermostat and if that is a heat pump it will go to it too. If it's interrupted you are essentially killing control power. You must have 15 KW strips if you need 100A. Does the heat pump work well in the winters there?
@@topher8634 heat pump does work in the winter however if you try and raise the temperature too much too fast on a cold day it's a supplementary heat source will come on to assist. the thermostat only has two wires which somehow does cooling fan and heating I originally was just killing power to the control board however if the system was already running it did not shut down by killing the board
@@nics-systems-electric ok yours is a communicating system. It should have a shutdown built into the board. Is the overflow wired on the condensate pump? It'll be 2 loose wires separate from the power cord. If it is it's probably using those terminals. That's a nice system BTW.
At the job site I’m working at with my dad they just put new fire panels in the hotels but it beeps a lot because the electrician keeps killing the power to work on the wiring but it come back on when he’s leaves to get stuff
Also place some CO Dectection in Above or within 15 feet of potential sources of carbon monoxide, such as a fireplace or stove. In or near humid areas, like bathrooms or saunas and within 10 feet of each bedroom door and there should be one near or over any attached garage. Check your local fire deoartment for more safety recommendations.
@@iansanchez1470 good recommendations. I won't be installing CO detectors as the addressable units have a very high cost and they are not necessary for my home so I cannot justify the cost
can you also install cameras and burglar alarm system in your house and link the house burglar alarm panel of house to your bugler system in the garage please.
We don't want a intrusion alarm system in the house they are two completely separate buildings and it would be a pain in the ass to have them connected if you're going to make that request I am also going to need a few thousand dollars to make it possible
Cool fire alarm system, but why not strobe light in each rooms? I know about sounds from hallways only. Keep updating about strobe lights without sounds in each rooms when your decision. 😊👍🏻
If I was a millionnaire maybe I would however it's not required and it's more fishing wires and cutting holes into a finished space and the main thing is it's more money
Where that hole is on the panel. You could put a Notifier ACM-24AT annunciator, but then again I am not sure if you have to have VeriFire Tools to program one of those.
Anybody but me giving you hell about the FPE panel? They can be made safer, but its not worth it in my opinion. The breakers are around 50 bucks US for a single pole; 70 for a double last time i sourced them. I'm usually able to sell a panel swap once the danger is made aware of.
I wouldn't want to put new federal replacement breakers in it as they have had busbar problems too I'd rather just get rid of it altogether the problem is finding a time you could shut down the house and the cost and if I have to upgrade circuits to arc fault.
Nic was that your grandma you’re talking to about how to silence it or was it your mom? I don’t know it sound like granny more I’m not trying to be mean I’m just wondering.
I’ve been watching this process since the very beginning. Your work is phenomenal! Great work, the system looks great!
Thank you very much I appreciate that
The way your dog barked at the trouble 😂😂😂😂
Don’t forget some dogs don’t like noises like that like my dog if I play like a really loud sound, he hates it
Monitoring service working as expected (unfortunately they have no opposable thumbs to call the FD)
I get it it sounds like the relay module the wheel lock module in the garage
Maybe he's an inspector!
I’ve waited for us to finally see the system actually boot up and the first system test to happen. Now that it’s here i’m happy hope to see more in the future!
Well it's not done yet we still have more additions to do and a verification
mom learning how to work something new. I loved seeing her learn how to work it.
im living in Germany and the systems are completly different, but we are using Notifier too. very cool System👍
greetings from Bavaria
Is bavaria part of munich or a different city/town?
Looks like I am veru wrong and don't know much about the geopolitics kf Germany.
@@xrafter Bavaria is a federal state of Germany
Glad to see this finished and fully functional. Excellent job Nic
Really cool, the system looks great. You are lucky to have such a supportive family. Was wonderful to see your mother get involved... What I really admire is your enthusiasm and passion for the subject, and your skills... I can't wait to see what comes next! In the UK our domestic security system (an Eaton i-on-40H panel) has smoke detectors linked to it and is connected to a monitoring company, so the fire brigade would be called if they went off. We have to pay a security company to maintain it though, plus the monthly monitoring subscription etc. Keep up the good work!
Thank you. monitoring companies do not except residential customers here anymore you can be monitored but it is only them sending you a message if there is a alarm so no different than myself monitored set up I use in the garage system
Amazing job getting your system set up and running. I can’t wait to see more tests in the future
looks really awesome! can't wait to see what the future entails!
Fantastic Nic! I've really enjoyed this series
lol I like how your dog barked at the trouble🤣
Looks great to see it all up and running man
Monthly tests will be awesome! Very Nice! I'm glad its done!
Great work through out the videos from first fix to power and programmed up and testing
Hope the family can manage to cancelling a
False alarms when you not in the House.
Your awesome man! Im building a access control system in my garage right now! Wish me luck!! Love your videos.
Good luck!
Congratulations Nic, I am beyond impressed. This is the best system ever!! Also very likely the first true commercial home system as everything is spot on. I love how there’s a zone marked “Nic’s Room” Also it’s definitely not the volume that upsets Ayla but rather the frequency as humans can only pick up a max range of 2300 hz whereas dogs can hear up to 4500 hz max and I believe that trouble sounder is somewhere between 22-3000 depending on distance. (Note how the low frequency sounder does not cause upset) As for the next episode you should do a “crappy smoke alarm” durability testing with Hayden. I love those
Thank you luckily Ayla is very relaxed does not mind any fire alarms it's Jackson who is the problem dog
Awesome man! Good work! Love the system.
Thanks a lot!
THE MOMENT WE'VE ALL BEEN WAITING FOR!!!
This is a great thing that you are doing, especially for the safety of your family. Nice work!
Wow really cool I’m excited for you!!!
Thank you
Amazing system!
Thank you
This is a cool fire alarm system
Great video!
Glad the Auto program worked! (after tweaking shit lmao) If I wasnt in Texas I would been more than happy to use my Verifire acct to program for ya. Great install man!! My plans for my house is a smoke with LF sounder bases and strobe in each room (like a hotel). Heats in the garage, laundry and kitchen. My corridors are large so at least 2 smokes in them lol.
Ive noticed lately that a lot of detectors have been going bad with Notifier since they switched manufacture plants, glad you got them replaced though! We've been sending back a bunch of them too. Love the video as always man!
good job nic keep it up
Hahaha I Love how your mom said i want todo it with the pullstation @ 39:03 that's something I would say and do as well if it's something new to me LOL Congrats on your New Home Fire Alarm System I Love your Videos keep up the Awesome Work.
yesss this is out ive been waitng!!!!!
The way the smoke detector had to end life by bouncing down the stairs
Wow you have finished the fire alarm system
Very nice system, also very functional, it is so much better than those unreliable smoke alarms, i do recommend that you install CO alarms if you have any gas appliances
Thank you. There is no danger of CO in the house so I cannot justify the extremely high cost of addressable CO detectors
@@nics-systems-electricif there’s no danger of CO in your house then it’s all good, and by CO alarms i meant something like First Alert residential units, First Alert is a reliable brand, it’s what i use in my house
@@NyxKemo yes there's no gas I'm trying to get away from the residential style of devices so I would likely put in something with the main system if I had to
@@nics-systems-electric a cheaper alternative to addressable ones is probably a monitor module with a System Sensor CO12/24A if ever you need to add CO detection
Can’t wait to see the full system test, you did a great job and I enjoyed the series so far. Also, Honeywell did an investor’s conference earlier this year where they showed off they were going to have LED L-Series, where they were going to have a T3/T4 setting. When they come out, do you think you’ll replace the current signals of you add CO detection to the system?
Likely not I find the LED devices really ugly and I don't require any CO detection in this building as there is no hazard of it I'd have to see how the new settings work obviously I need to run more wires but I guess it's not a global setting I'd assume and it can do two different separate tones once installed
@@nics-systems-electric yeah, LED devices are pretty ugly compared to xenon devices. Also, it’s weird to see the slight differences between Canadian and American codes. Here, CO is required in all homes in the majority of states. As for the wiring, if it’s anything like Wheelock’s Eluxa line, it’ll use synchronization pulses to differentiate which of the two tones to output. On the T3/T4 setting, the Eluxa uses T3 when receiving the silence sync signal, and T4 when receiving the audible sync signal. Obviously, it wouldn’t be compatible with legacy systems, it it does save wire running costs for retrofit and new installs.
@@HenBasketFireAlarms OK that is interesting as for those devices. CO detection is not required if there's no gas service to the house or any CO producing gas
Awsome!
i've been waiting on this one
good work
The system looks awesome! Good job. Looking forward to future system tests. One question though: Why did you put a different sounding horn in the garage? The system still sounds great but I would have thought you would have wanted the sound to be in sync. But it's no big deal at all. You've done an excellent job with this project. Keep up the good work.
Because the garage is not a sleeping area so it does not need low frequency system sensor sync will still synchronize different frequency devices
Cool system Nic
Thank you
Just as a habit from installing lots of Honeywell addressable devices, I think it is best practice to rotate the rotary wheels fully in each direction before setting address. Had a school with similar issues of double addresses from smokes on a new install. Spinning the rotary wheels solved it. I train all my helpers to do it. I don't have much experience with notifier other than older stuff but been installing farenhyt and gamewell fci for a little over five years.
Yeah for sure that's what I meant when I said wiping the dials just spitting them back-and-forth to make sure it's making right contact with the right spot
WOOO IF BEEN WAITING
Woah!!!!!!!!!!!!!!!!!!!! THATS SO COOL OMG
YEAAA HES THE BEST CZcamsR!
Thanks
It’s crazy how much better the low frequency sound travels through the house than the horn.
The horn is in a insulated wall the rest of the house isn't that's why it's different
This panel is a good choice for ur home system!
nice!
I’m currently working on my 4100U basement system. About to start the mapping out all the device locations so that i can rough em in and program the system
That's awesome
This is great. How come you had a lot of left over devices and what was the small bases supposed to be used for. Do you remember why the panel didn’t like those 3 devices. Can’t wait for the testing next Saturday. Also can’t wait for the expansions which will probably happen in months. How come you didn’t do a burg panel with a few smokes. Keep up the great work!
A few extra devices to do any other expansions the small bases were sent along with all the smoke detectors I ordered not sure what you're supposed to use them on as they don't fit on a standard 4 inch octagon box
You should do durability testing on the smoke alarm you had in your house
Maybe I don't know if I'll be doing any more durability testing videos in general
@@nics-systems-electricwhy?
Hahahaha I love that I bet you had fun playing with that lol 50:02 50:45
pro tip: use the next/previous selection buttons while programming instead of doing detector and address (instead of detector 001, est, detector 002; do detector 001, esc, next selection)
also, all your heats are on Z01, photo's are on Z03, and pulls are Z04.
also also, you were using the short name field for naming, you use the thing that says DETECTOR ADDR for full name, and that field next to the zones are for the "short" name.
Yeah that is a good tip not sure why I was doing that the naming has been changed just needed something temporarily until I could get around to name everything properly
Could you add the Garage as trouble or other way round if house goes off it shows trouble in garage
That's what I did where if one system goes into alarm the other shows supervisory
Breaker locks are required, at least in Ontario. The verification person always asks us if there is a breaker lock on any system we verify
That's interesting as I've never seen one here on a new build or existing I have seen them on emergency lighting a couple times but that's it
U should install a co detector with the house system. And also incredible job look for …housing than mine house system LOL
Thank you. I would if there was a danger of it but for their extremely expensive cost for the addressable units when there is no danger I cannot justify it.
Hey if you want to do furnace shutdown, I believe one of the easiest ways would be to attach the red 24VAC wire running to the thermostat to a normally closed alarm relay, when the alarm goes off, it will cut the low voltage power which is responsible for sending the control signals to the HVAC system.
It's already all done I originally did it with just killing 24 V to the board which did not work if it was already running in cooling or heating
@nics-systems-electric oh right, there would probably be a delay for it to shut down normally. I'm looking forward to the video on how it was done!
Nice
2:16 you couldn't have made the three flush at the bottom? you're killing me, smalls!!
I installed it to code not the way I like the look either but just following the rules
@@nics-systems-electric I've installed a ton of pull stations next to annunciators, and never had any pushback for them being level at the bottom to the relevant code. Code generally states that a device shall not be installed GREATER than x" AFF.
@@rayarsenault4774 I talked about this in my install video Hass to be between 1050 mm and 1150 mm
Sometimes there are little bugs in the program that just have issues with certain devices set to certain addresses. It even happens on the old AFP style panel. For example, my AFP-200 Stopped liking the address 1D001 for whatever reason. Couldn’t fix the issue with any model detector. So I swapped it to 1D007 and it worked fine. Sometimes if you set stuff in the program wrong, the panel has a fit. But it’s definitely not you.
Seems like a device problem for whatever reason even though they are brand new where devices are taking the wrong address really weird though
why didn’t you go with something like a notifier nfw-50x or a security system?
Security systems are terrible. the NFW 50 would work if I owned one however the 320 is obviously the better more capable panel offering more features and more total power and can run flashscan whereas the NFW - 50 X is only litespeed and clip and devices are harder to find
In the us or at least here in California if you have a apartment or hotel. You have to keep the residential smoke detectors. Even though you have the commercial system installed. You cant remove them. Some places i have seen they will monitor the independent smoke detectors. Never figured out why that is i think that is building code.
That is common if the system does not protect the individual units it's getting more and more common to have directors and sounder bases from one main system zoned separately to the individual units
For the ones that were taking 2 addresses, are they possibly dual-function Smoke & Heat detectors? maybe each sensor using a separate address. Not sure otherwise how that would happen but I know there are some like that out there
No just smokes that's not how they act anyways it's called a multi criteria detector and it only takes one address
@@nics-systems-electric Cool, yeah I didn't know but was just wondering since that is such a weird thing to happen, and those kind of problems can be the worst to figure out
What does the alarm sound from the outside? Also it would be cool to add a bell outside the house to hear the alarm outside of the house. Cool system though I enjoy these videos 😁
There is nothing on the outside as it's not required if there was I would not be able to do any system test videos
Will you include the house in your monthly testing from now on?
Not sure if I'll included or do a separate video
Cool, Nic Great job we all believed you. Nice Test! Also quick question did you use your old NFS-320C or bought a new one
Thanks this is just the initial program we still have more additions and do the actual verification
@@nics-systems-electric You should change the coding on both systems and test both systems on a system test
@@leafmk why would I change the coding temporal three is the required evacuation tone
@@nics-systems-electric it would sound great also theres not much nacs also i mean like the coding like you can change it too march time or temp 4
@@leafmk don't know what you mean by that
those hvac systems are very simple in how they turn on or off, could be as simple as breaking (disconnecting) 1-2 wires
can you link your house and garage fire alarm panels together.
Not for full alarm but I did for supervisory
you should get an acm-24at, it connects via the eia-485 bus and it would fill in the blank panel you have to the left of your kdm-r2, you then would also be in compliance of the zone annunciation code canada has, it needs verifier tools and i know you dont have that but i might be able to get it for you
It would satisfy the code requiring zone annunciation not that it's required for my house but if it was it would satisfy that however not at the panel it would need to be at the annunciator and yes the problem is requiring verifier tools
Watching in Kirklands right now.
I'm just curious does your system have the thing that also contacts emergency services during a emergency?
No monitoring companies do not accept residential customers other than sending you a notification so no different than my "self monitored" system in the garage which I will likely do in the house
@@nics-systems-electric oh mk
I don’t know why but the low frequency l series reminds me of voice evac, also you should durability test the smoke detectors that didn’t work with the panel
The Federal Pioneer panel is fine; just the US ones from the 60s-80s have the problem of not tripping
The Canadian version being federal pioneer has the same problems as the federal Pacific version in the US with high failure rates when it comes to overcurrent protection they are the same stab lok breaker in both countries
On your air handler shutdown just interrupt "R" on the thermostat wiring. If the condensate pump was installed with the overflow safety wired it should be interrupting the same just put in series. Some of the higher end Trane/American Standard equipment like yours will have an SD or S/D terminal and you can just short it. You could also install a shunt trip breaker but they're kinda pricey.
The HVAC shutdown is already done I ended up having to do it twice with the second time shutting down a relay interrupting power to the board and the blower not sure if you can find a shunt trip breaker for a home line panel but you could find a contractor either way it would be large as you need one rated at 100 A
@@nics-systems-electric I don't recall ever seeing shunt trip in residential panels either. What you did works too. The R terminal is 24VAC to the thermostat and if that is a heat pump it will go to it too. If it's interrupted you are essentially killing control power. You must have 15 KW strips if you need 100A. Does the heat pump work well in the winters there?
@@topher8634 heat pump does work in the winter however if you try and raise the temperature too much too fast on a cold day it's a supplementary heat source will come on to assist. the thermostat only has two wires which somehow does cooling fan and heating I originally was just killing power to the control board however if the system was already running it did not shut down by killing the board
@@nics-systems-electric ok yours is a communicating system. It should have a shutdown built into the board. Is the overflow wired on the condensate pump? It'll be 2 loose wires separate from the power cord. If it is it's probably using those terminals. That's a nice system BTW.
@@topher8634 I don't remember I know it's working now by killing power to the board and the blower though
We need a video of you training your mom on how to use the system 😭
I showed family members the basic operations that they need to know
A heat detector that is having an identity crisis is crazy
At the job site I’m working at with my dad they just put new fire panels in the hotels but it beeps a lot because the electrician keeps killing the power to work on the wiring but it come back on when he’s leaves to get stuff
Also might be hearing the beeping all day since I been there it don’t bother me I go in to see the trouble on the display
YESSSSSSSSSSSSSSSS
You're going to probably end up having to disable the piezo in the annunciator with the dogs not liking the high pitched noise lol
It shouldn't be an issue the fire alarm system should not be in trouble or alarm commonly
You should also have a SMS device on the panel so you receive a message saying Fire alarm in (Device) like in the Garage system
I am just going to use the same one from the garage for the house
Also place some CO Dectection in Above or within 15 feet of potential sources of carbon monoxide, such as a fireplace or stove. In or near humid areas, like bathrooms or saunas and within 10 feet of each bedroom door and there should be one near or over any attached garage. Check your local fire deoartment for more safety recommendations.
@@iansanchez1470 good recommendations. I won't be installing CO detectors as the addressable units have a very high cost and they are not necessary for my home so I cannot justify the cost
can you also install cameras and burglar alarm system in your house and link the house burglar alarm panel of house to your bugler system in the garage please.
We don't want a intrusion alarm system in the house they are two completely separate buildings and it would be a pain in the ass to have them connected if you're going to make that request I am also going to need a few thousand dollars to make it possible
Cool fire alarm system, but why not strobe light in each rooms? I know about sounds from hallways only. Keep updating about strobe lights without sounds in each rooms when your decision. 😊👍🏻
If I was a millionnaire maybe I would however it's not required and it's more fishing wires and cutting holes into a finished space and the main thing is it's more money
Where that hole is on the panel. You could put a Notifier ACM-24AT annunciator, but then again I am not sure if you have to have VeriFire Tools to program one of those.
Yes you do need verifier for those
@@nics-systems-electric Yeah I thought so. Kinda wish Notifier made VeriFire Tools accessible to the public, but what can you do?
YAAAAAAAAAAAAAAA
good you removed the video that leaked your phone number, anyway good system! i kinda want to put one in my house now
Which one was that? I've removed a lot of videos lately
@@nics-systems-electric upgrading the generator buildings connection to the garage
@@avgrug yeah possibly I removed a bunch that might've been one
you forgot the one where i found your address and your highschool >:)@@nics-systems-electric
I just now realized this video was recorded on my birthday.
21:56 You could fit FACP Room
sounds like Australias fire alarm them goes in to worp
Are you gonna start having home fire drills that’s what I do with my family I’ll let them know what day we’re having a drill but not the time
50:02 rip smoke detector
Anybody but me giving you hell about the FPE panel? They can be made safer, but its not worth it in my opinion. The breakers are around 50 bucks US for a single pole; 70 for a double last time i sourced them. I'm usually able to sell a panel swap once the danger is made aware of.
I wouldn't want to put new federal replacement breakers in it as they have had busbar problems too I'd rather just get rid of it altogether the problem is finding a time you could shut down the house and the cost and if I have to upgrade circuits to arc fault.
i know you dont like requests but i just want to say it would be cool if you activate the house system and the garage system at same time
I would need two people to pull them at the same time and then it would go off at the same time
@@nics-systems-electrichave you thought about a way to link the two systems together.
@@Robert-Wilson I have connected them but only for supervisory
the disrespect to that peasant smoke alarm
maybe last video you dropped the detector and it makes the detector not happy and it was same as Joey's NFS-320c Onyx systems
NEW UPLOAD BOYS LETS GO 🚨🚨🗣️🗣️💯💯
54:44 Residential alarms are NFG.
Nic was that your grandma you’re talking to about how to silence it or was it your mom? I don’t know it sound like granny more I’m not trying to be mean I’m just wondering.
My mom
R u going to test it
Why don't you take a look through my channel and see there's multiple videos of testing it
Oh
Your dogs aren't going to like the beeping of the panels lol because everytime it goes off they bark😂
Good thing it's not supposed to be going off every day
@@nics-systems-electric Yeah true lol🤣🤣
YES A CRAPPY KIDDIE SMOKE DESTRUCTION
54:44 Not normal for a Notifier product, Maybe EST made the bad detectors.
I was thinking that too lol but in all seriousness notifier's quality has been going downhill
Not as bad as EST’s quality.
Hey,it turn into a durability testing
Maybe I don't know if I'll do any more durability testing videos
Whoa. Why do you have two kitchens??
One small one for anyone downstairs to use so they don't have to come upstairs
@@nics-systems-electric CZcams celebrity life is crazy 😜
30:10 "Dallway"
Can you install a fire alarm sistem in my apartmint
No