DIY Wiring A Shed For Electrical | Shed Build Part 12
Vložit
- čas přidán 19. 01. 2024
- As I say in the video, I'm not an electrician - I recommend consulting one if you're planning to wire your shed, cabin, or tiny house, but I figured my experience and the full process I went through might be helpful or entertaining. I am running UF-B cable underground from my main panel to my 10x16 shed. I'm creating 2 circuits, one for lights and one for receptacles (outlets). I show my planning process as well as the install of my 12-2 Romex, 14-2 Romex, 14-3 Romex, and all the switches for my light fixtures.
My first outlet is GFCI to protect all the electrical inside the shed.
Here are links to the products I used or similar (Amazon affiliate links):
Dovoh Lazer Level:
amzn.to/47UVCsN
Tesmen Voltage Tester:
amzn.to/3Hs5q1V
Discount code: FKBUKNPL
12-2 Romex:
amzn.to/3u25IcM
14-2 Romex:
amzn.to/3OaGnnZ
12-2 UF-B Cable:
amzn.to/3vLqPkc
14-3 Romex:
amzn.to/42aJK46
3-Way light switch:
amzn.to/3u4Hm23
Cable Staples:
amzn.to/3U3c1HH
Square-D breakers:
amzn.to/47Ezulv
Square-D breaker boxes:
amzn.to/3Oc1E0e
GFCI Outlet (Receptacle):
amzn.to/3SoeH1k
*Disclaimer: I'm not a professional, just a seasoned DIYer. You should double check my advice, adhere to your local building codes, and get advice from a professional if needed.
@HomeDepot @RYOBITOOLSUSA - Jak na to + styl
That glue you used is for CPVC… never seen that done on conduit before. There’s a gray glue in the electrical aisle that is what usually is used.
Thanks for choosing Dovoh's 16-line self-leveling laser level K4-360G. As a 10-year laser level manufacturer, we specialize in delivering products of the highest quality, accuracy, and durability. This 4D laser level suits woodworking, floor installation, aligning tiles, hanging pictures, home improvement, etc. We encourage you to explore the numerous use cases and discover the versatility of our product.
This answered a few big questions I've had concerning a project similar to what you did and I Ty for putting out a video that I could relate to and learn from. Good work!
Electrician here. Normally 95 percent of these electrical videos are so hard to watch with how many mistakes are made, but I think you did a great job. I saw that you were strapping your wire at the end of the video. Just make sure your wire is strapped within 8 inches of every enclosure, Including the disconnects, and that your pvc is strapped within 3 feet of every box. Only other thing I'd comment on is doing neat work but this looks good still. Nice job!
Thank you for the comment and feedback!
Great stuff, I recommend you get a wireless mic, like the Rode wireless 2 or the new DJI wireless mics
Thank you! I'll work on getting one.
How much did you end up spending on this build?
Tho whole project ran a bit over $7k. I'm still tallying up everything and I'll eventually do a final cost breakdown. Still a huge savings over buying pre-made or paying someone to build it.
@@EveryotherKarl I'd suggest putting in 4 - 6 concrete footings and tying the floor into that, to make sure it's secure in high winds. You've essentially built a house.
Can we get a ridgeline update? Any new mods?
The Ridgeline is doing well, no mods, but I did install a new starter, video coming soon on that.