Don't make these thermal paste mistakes (how not to apply thermal paste)
Vložit
- čas přidán 21. 07. 2023
- In this video I'm showing you some of the basic mistakes to avoid making with your CPU thermal paste application. You might have made some errors when applying thermal paste without even knowing it. It's really easy to do frankly.
One thing is the traditional method of applying a "pea" sized amount of thermal paste to your CPU and then hoping your CPU cooler will squash the thermal paste out sufficiently doesn't work so well with modern CPUs which are more rectangular. As you'll see this can sometimes mean that the thermal paste doesn't entirely cover the CPU's integrated heat spreader and therefor you might find your CPU is runinng too hot in certain spots.
Many modern CPU coolers include pre-applied thermal paste, so you can just pop them on with the right mounting brackets and then happily get on with your life. But during the installation if you damage that thermal paste it can also cause problems.
The other thing to watch out for is accidentally ending up with a plastic sticker on the copper plate of the CPU cooler that could impede cooling. This is far too easy to do.
So I often recommend this...
- Download Cinebench and HWMonitor or HWInfo and run a benchmark with Cinebench
- Check benchmark score against "normal" ones to see if yours is significantly lower
- Check max temps to ensure CPU is not too hot (and GPU while you're there)
If you CPU is in the high 90s, then there might be a problem. A simple solution might just be checking the pump head thumbscrews are tight enough or checking the thermal paste has actually applied to the entirety of the top of the CPU.
Watch these videos:
How to improve the performance of your gaming PC • How to improve the per...
Essential things to do when you first build your PC • Essential things to do...
How to get more FPS with your Nvidia RTX GPU • How to get more FPS wi...
Don't make these mistakes with your NVMe SSD installation • Don't make these mista...
Avoid these problems with your all in one CPU cooler • Avoid these problems w...
Why you should plan your PC builds with care (unlike me 🤔😁) • Why you should plan yo...
Where should you mount your AIO liquid cooler? The best places tested! • Where should you insta...
Important downloads:
Hardware monitor - www.cpuid.com/softwares/hwmon...
Cinebench R23 - www.maxon.net/en/downloads/ci...
HWInfo - www.hwinfo.com/download/
Specs of this build:
Motherboard - Gigabyte Aorus Z790 Elite AX • Gigabyte Z790 Elite AX...
CPU - Intel Core i5-13600K
RAM - Crucial Pro 32GB Kit (2x16GB) DDR5-5600
NVMe SSD - Corsair MP600 GS ( • How to install and set... )
PSU - Corsair RM850X PSU - • Corsair RM850x Power S...
GPU - Nvidia RTX 3060 Ti • Nvidia Geforce RTX 306...
Fans - Lian Li SL-INF 120 fans ( • How to connect Lian Li... ) and Reverse fans ( • Lian Li SL Infinity Re... )
AIO Cooler - Lian Li Galahad 2 Trinity SL-INF ( • Lian Li Galahad 2 Trin... )
🏆🏆Big thanks to my super awesome CZcams members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Aaron Yarden, Space Cannons, Riggs79, Mike S, Jay Shank 007, Jason Morgan, Starastin, Charles Latrom, McFarty, Chief Hao, Kraken Tortoise, Chris Thompson, Dazed Bengone and Megan Schafer. 🏆
Want to send me things for videos or other reasons? Use this address:
The Provoked Prawn
PO Box 13277
MANNINGTREE
CO11 9BE
United Kingdom
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - teespring.com/stores/the-prov...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
📸 Recorded with www.amazon.com/ideas/amzn1.ac...
Shure SM7B and GoXLR - • Shure SM7B and GoXLR M...
PLEASE NOTE
Affiliate links*:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. - Hry
A less messy way to spread the thermal paste is to use a nitrile glove and use your index finger to finger paint the thermal paste over the IHS.
After disavowing the method, yesterday I spread the paste over the top of my CPU. I used an old credit card and thermal grizzly. It seems to be working like a charm.
Was white thermal paste 🤣🤣🤣🤣
OMG……..just apply thermal paste to the entire die and apply it as thinly as possible. This improves contact between the cold plate and die. The thermal paste only fills in the micro gaps. Overthinking this whole issue.
Prawn! I have a big problem you NEED to fix!!! Your Channel profile picture is shifted to the left nooo!!!😭😭😭
Just re did a cpu earlier today. Noctua do a nice thermal paste package solution. Comes with thermal paste, cleaning wipes and a plastic cut out that fits am5 cpu for easy application.
I think it can also depend a lot on the paste. Something like Kryonaut that’s thicker benefits from getting manually spread but with something like Noctua’s solutions, I find I get better results using their recommended application method in their instructions. Difference is minor but still an improvement in my experience.
I built my first PC a few months ago and the things I was most concerned about were 1) dropping the CPU in correctly 2) cable management (ten fans and an LCD screen on my AIO pump, still working on this one) and 3) thermal paste application.
Got to change my thermal paste for the first time and looking for instructions
Thank u for the review
Got the h100i capellix xt and used the stock hexagonal shape thermal paste that they had on it. Gave it a nice little wiggle before screwing it in and had no problems at all with my temps..
👍
just putting pumpblock on cpu has much less pressure , so you got wrong thermal paste application, if you will screw bolts and get more pressure , the thermal paste will spread better and there will be a full coverage of thermal paste on cpu
Seems to me you could use painters tape to cover up everything but the CPU so you don't have a giant mess to clean
Also can you do a video on DDR5 Intel xmp/ AMD expo ? Like if expo works on Intel or xmp works on Amd? There are no videos explaining compatibility and how to change these things so i think it will help out a lot of people
What's your view on original ILM bending 12th and 13th gen CPU's and causing worse thermal performence? Do you use derBauer bracket or stick to original ILM in your builds?
Can you recommend a mother board that fits an el gato and a 4080 card for amd I can’t seem to find good info
I prefer to cut from the sheet and apply PTM7950 phase-change material.
great contribution, keep it up!
Thanks, will do!
I put thermal paste in the pcie x16 slot. I noticed the graphic card heats at least 10 degrees less.
great video prawn dude
Thank you kindly.
Ok, just built an 13900k system with a 360 strix aio.
The thermal paste was already applied to the cooler by the manufacturer.
When I did my first tests using the software you suggested the cpu would consistently overheat 100’c, no overclock all standard settings.
I researched this and found quite a few people on reddit saying that there isn’t an aio that is capable of cooling this cpu and you should set the Asus multi core enhancements to “disable-enforce all limits” in the bios.
I did this and it worked I get a better cinebench score and stable temps.
My question being, is this true with the 13900k and am I restricting the performance by any noticeable amount, I feel I’m not but I’m not very experienced with this.
Any help or advice would be greatly appreciated.
i9 can run very hot, especially if it's automatically Overclocked by the motherboard. I had this issue with the 12900k. Had to turn off the overclocking and undervolt. Alternatively you could try some different thermal paste like Kryonaut
I have the same CPU and its runnin 100'c on cinebench with Aorus z790 elite motherboard, with kraken 240 AIO.
Just orderered Kryonaut paste and 360 AIO cooler. But I doubt it will make any significant difference.
@@sxzoR11 I’m no expert but under volting seems to be the way to go.
@@TheProvokedPrawn brilliant thanks.
@@Manic.miner2077 I'd also try just checking you've tightened the stand off screws enough. If they're loose that can hurt performance.
I never used the supposed "standard" method.
I'm always on the "spread that crap evenly over the entirety of the IHS" train and never use the crap things get delivered with.
Atleast for CPUs like my now 5800X3D.
GPUs is another Story, there a line in the middle at the longest extent and then screwing the cooler 1 side to the other and back and that with not to thin paste, usually gave me the best results.
I'm using MX-6 btw, especially on GPUs, but as it works a little better with everything above 100Watts+ compared to MX-4 for some reason, its also the Goto for powerhungry and hot CPUs now.^^
My CPU started running hot last night and shut off, a few hours later and it was running in the high 90’s Fahrenheit from the start. should I try replacing the thermal paste? NZXT prebuilt with Ryzen 7 3700x & 3060ti
Possibly but it could be other things czcams.com/video/nVkN8diBIAE/video.html
@@TheProvokedPrawnturns out the M22 cooler was faulty and NZXT sent me the new version(Kraken 120) I’ll have to go back and watch your video on mistakes to avoid when applying thermal paste now. 😎 best tech channel on CZcams
@@diz354 glad to hear you got it sorted. Thanks for the kind words
How come everybody just doesn't put the dot like the instructions ?
What thermal paste is better to buy?
Depends on the CPU/GPU you want to use it on.
You cant get wrong with Arctic MX-4, but with CPU/GPUs far exceeding 100Watts i'd suggest MX-6, it works a little better than MX-4 after some treshhold for some reason.
Just make sure you get a decent enuff cooler as well, good paste helps with good heat transfer, but the cooler has to do the work.
MX-6
ty
Welcome
The spread method is elite. Come at me.
Just drop the whole tube of thermal paste in there.
safest and easiest.
Lolz
i think the best way would be to do 3 dots, if you are too scared to scrape it around, because in the end, the difference will be very tiny
cross method is also good.
The days that too much thermal paste is worse than too little are in the past....
helloooüüüüü :)))
Theyre about to strip the earth for eletric vehicles. When lithium cobalt and nickle blast sky high us pc gamers will be rich as thieves!
11 fan non servono a niente mettine di meno