Aisin AMR500 Supercharger Assembly
Vložit
- čas přidán 28. 08. 2024
- Aisin AMR500 Supercharger Assembly
► Tilaa kanavani/Subscribe to my channel: tiny.cc/JoniK
► Tue videoiden tekoa/Support my channel (osta jotakin/buy anything):
tiny.cc/Ebay1 (Ebay) (AliExpress)
► Kanavajäsenyys/Channel membership:
tiny.cc/jasenyys
► Lahjoitus/Donate:
paypal.me/jonik1 (PayPal)
#jonik #car #tuning
Facebook: / suomenautohifiharrastajat
/ puntodemobuild
/ team160db
Instagram: / jonikallioniemi
/ puntodemobuild
Precision engineering, done in a Sterile environment !!!!!.... Love You to bits tho ;-)
Omg. I was praying u wouldn’t pound in the bearing or use the inner race to push it in 😂 smart man
I did a mistake when I pressed those rotors though because I didn't have anything suitable for both races of bearing so I used only outer race from old bearing. But yes I know how to install bearings, been doing that for almost 20 years. Btw I have that same pic as my wallpaper if you check my new pc assembly video 😃
@@JoniK1 u would be surprised on what happens. Listen. I just made a mistake yesterday. I was doing my steering coupler and forgot I was turn my wheel to get the other bolts. Long story short. My steering wheel ended up upside down 😂
@@JoniK1 shit happens brotha. But I glad ya did it right. That’s very tough to get that one side on without pressing on the inner race. I mean sure if u would’ve thought a lot. U could’ve put something on the inner race to press on on the other side. But I mean. That’s a lot of thinking. Not every one thinks that quickly. Them kinda bearings are forgiving in my opinion. Not too much. I think it’ll be fine.
If you MIG weld a hot bead around the INSIDE of the stuck bearing race, it will cool and SHRINK and tap out with ease.
Las únicas partes que no cambiaste fueron los ejes y los engranes, los ejes giran centrados sobre los rodamientos, quizás los rodamientos tengan un poco de espacio entre las esferas y eso ocasione el movimiento y lo que puede generar el ruido. Por último, puede ser que los engranes tengan un poco de desgaste y no acoplen bien los dientes entre si.
Buen video, saludos desde Venezuela
Hi man, I have to say there's videos of the amr-500 supercharger you done are very helpful & best. Cheers
Thanks 😃
Your more helpful then these amr-300 & amr-500 groups on Facebook, thanks for doing these videos & putting on utube. Cheers Rob
Great job, great video.
Roots superchargers, from my understanding, require very tight tolerances. The seals that got wore / damaged when the bearing went bad, are probably the reason why the boost is lower. Perhaps you can make or purchase new seals.
I've never built one of these, but I assume that you need to use something to "clock" the rotors while you press the gears in place. It may be possible to do this my using shims or something, but I think the rotors need to be timed "clocked" very precisely to create a proper seal and opening for the inlet air. The timing of the gears doesn't matter as they are pressed on at any position on the shafts, but the position of the rotors is critical when the gears get pressed into place as that will determine the clocking / positions of the rotors relative to one and other.
I'm guessing that the noise that you heard after building it was the seals touching the rotors due to the timing being a little off. I would guess that the factory probably has a jig that holds the rotors in place while the gears are pressed on.
Cheers.
Yes that is possible. I marked the positions with utility knife before disassembly but of course that's not 100% accurate. I think it would work okay with new rotors but those aren't available separately any more. That's why I decided to use different supercharger instead, Eaton is so much quieter and works flawlessly
very interesting video... 👍👍👍
very detailed..
What's up my friend, today I realized that my amr500 began to liquidize oil where the rollers are and when it is running the amr500 has a small hole and the oil comes out through there, little oil is coming out, my doubt is my friend, the oil seals were already damaged, right, I have watched your videos and I realized that when you changed the bearings that were damaged, you also changed the oil seals
Yes those oil seals were in bad shape also
@@JoniK1 Thank you. my friend I appreciate the information, that is what I will change the oil seals friend, a question friend if I continue using the amr500 like this with that little oil leak open problem, in what I get the seals to replace them, thanks friend
Hi, this amr500 supercharger uses what kind of oil? Apart from the original oil of this supercharger.
85w-90 GL-5
Hi! Great videos dude. I would like to install an amr500 supercharger to my car. Can I install It alone without tune ECU or something else?
Hi! I've seen some people using rising rate fuel pressure regulator 😊
Hi Man, good job on this, just a quick question, before you installed the supercharger, did you change anything on the engine, or is it completely stock motor?
No need to do anything if you stay in save boost level ~0.5bar 😊
Very nice!
How about my friend, the serial numbers that you show on the ticket are the codes. of the oil seals and the bearings my friend
Yes they are. You can drive with the oil leak but make sure the supercharger won't run dry
@@JoniK1 Thank you. my friend, but to avoid going towards it, I am going to remove it to disarm it and change the oil seals
Saiskohan tuollasesta rakennettua sellasen matalahkopaineisen mutta korkeatuottoisen paineilmakompressorin 2.2kw moottorilla..?
Saa, oon nähnyt useamman toteutuksen muun muassa altaiden hapetusta varten
Onko nuissa pulteissa vääränkätinen kierre mitä kirit räikälä tuossa lopussa?
Kuvasin puhelimen etukameralla eli on peilikuva 😃
Was this pretty much a rebuild of the supercharger?
Yes something like that, with new rotors it would work like new again 😊
how many kilometers have you traveled since the this compressor was new?
Not sure, it lasted for 1.5 years
Medidas de reten y rodamiento porfavor yo tengo un amr500 y tiene perdida de aceite
How many kilometers did it last?
Not sure, 20000km+? Over 1.5 years 😊
what is the bearing size? Amr500
The one he said was hard to find is made more difficult by the craptastic font used in the model number. It is DG175216 that indicates a size of 17x52x16 which corresponds to a couple of pieces from the Koyo lineup. Once you have the number figured out from the crap font and you look for Koyo cross reference the rest is easy.
I know this is an old video and comments but I literally just happened upon it so my posts are hopefully to help anyone else doing so.
Did you add gear oil when you had it and how mutch
Yes 150ml
What's the oil in tht supercharger?
They recommend 85w-90 GL-5 but I had leaks with it, GL-4 is a bit thicker
ei ees skf:n laakereita, ainoo laakreimerkki minkä muistan tosin
nuo on koyon laakereita, ei ne aivan paskoja ole
How many ml oil inside ?
100ml
Okey thx Jon
Same oil for machine or different.?
Gearbox oil 75W-90 😊
Thx bro
não entendí nada
Cómo se compra precio
Broing