S2E10: We find out what oil works best for the AMR300 and 500 Supercharger plus we add water cooling
Vložit
- čas přidán 28. 08. 2024
- Season 2 Episode 10 : Due to shipping delays, we did not receive the intercooler in time to install and test on our street legal go kart. In this episode, Jimbo experiments with an assortment of supercharger oils because the recommended oil was making the supercharger get extremely hot. Furthermore Jimbo modifies the supercharger for liquid cooling, yeah that's right a liquid cooled supercharger... During the road test to check the temperature of the supercharger the little 420 engine suffers a mechanical event. We also unbox some stuff a viewer sent us. thank you Aaron.
The walls in our new studio are bare, if you want to send swag please send it to:
Robot Cantina
207 S. Sedgwick Ave
P.O. Box 28
Haven KS, 67543
With dedicated cooling for each subsystem, the street legal go kart is basically becoming a Bugatti.
The veyron/chiron has what, 4 intercoolers?
@@guufiplays2681 I know they have 10 radiators
at 1/19 scale regarding engine displacement...
ok 1/2.67 if you consider 3 dimensions
😆😅🤣😂!!!!
@@dangerousdave5915 🤣🤣🤣🤣
It’s kinda funny how this simple engine is slowly becoming even more complicated than the original one.
For some reason the engine bay looks sick with all that stuff. I would have never expected a project like this to be so entertaining
it deserves a lexan hood
The PC water cooling fan was a great idea. I use them for the amplifiers on my subwoofers.
dude thats a great idea, an if you used clear plumbing you could UV die the coolant an add blacklite or neon to make it dance with light :D
@@BeamerTheFox that's a genius idea 🤣
@@BeamerTheFox The whole unit (including plumbing system) came with RGB lights built in!!
@@FrontalWaterbed I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
I'm wondering if using this same type of setup on the core of a water-cooled oil cooler might lower oil temps, without requiring an additional oil cooler.
A small oil cooler with a small oil scavenging pump may help significantly lower the supercharger oil temps as well. I do like where the build is going though!
😚😚😚😚😚Oil is very interesting!!
@@kansasrose2909 Fascinating!
Love where this build is going.
I’m pretty sure you can find close to ARP strength head studs at 20% of the cost at grainger or McMaster Carr.
I also highly recommend Allen's fasteners. You can get ARP hardware by the item for the cheapest prices I know of anywhere. Fast shipping too!
@@802Garage Looking forward to another great video soon!
I'd love to see you bring it into a Honda dealership for it's "yearly maintenance" with a hidden camera under the hood I'm sure you would get some very confused reactions
Yes!! 🤣🤣🤣🤣🤣
@@mommapanda5736 👍👍👍👍The reactions would be priceless!
@@kansasrose2909 Looking forward to another great video!
@@mommapanda5736 Me too!
@@kansasrose2909 Do you think JIMBO will ever get it to 70MPH??
One of the things i always wanted to do and never had the time for it. Was to take one of these engines and weld a jacket around the cooling fins and see if i could turn it into a water cooled engine. Since your already sticking a water cooler into this thing..........might be something to experiment with.
they make water cooled briggs heads. theres probablynalready one out there.
This is pretty much how the first water cooling setups were done. As I understand, it worked pretty well.
@Alfred Wedmore I'm not doubting that, it just seems easier to put the jacket around the fins than it is to try and remove them. For experimental purposes. Plus i got this idea originally from wanting to capture the waste heat from a generator. Would make sense to do that and pipe it to a radiator inside the house for heat in the winter if the power goes out.
Look up 805roadking here on CZcams.
@@nickmcwilliams685 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
I've been following the series from the start, thank you so much for using my recommendation from the last video for the computer cooling solution and the Epic series processor block 😂 I can't believe how well it actually works! It means the world to me that this ended up in the car! Cheers from Canada
I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
. "Ambition is a poor excuse for not having sense enough to be lazy." -
For the head gasket. There's a mod refered to as the piano wire mod. We're a metal o-ring is made from piano wire and sandwiched between the block and head gasket . Typically done with turbo builds. For the same reason as why you may need this
First saw on that boosted bois garage, they sprayed copper coating on the head gasket, this is becoming a build I’m starting to obsess with lol
Wow that TriboDyn temperature difference is actually quite significant. Love you PC cooling solution for the supercharger. Great fun overall for sure!
🤣🤣🤣🤣🤣 ROBOT CANTINA has a great video this week!
@@mommapanda5736 😚😚😚😚😚Oil is very interesting!!
@@kansasrose2909 Fascinating!
The goal was to get it to 70mph , right??
@@mommapanda5736 Do you think he will ever get there??
Why do I find this series so fascinating? I think I am addicted. Can’t wait to see where you take this. With the price of oil and vehicles, your mower/ cement mixer engine in a car may become a reality for people needing basic transportation. lol Phil
Addicted ? Me too. 🤣🤣🤣🤣🤣🤣 ROBOT CANTINA
had a great video this week.
@@mommapanda5736 😊😊😊😊Oil is very interesting!!
@@kansasrose2909 Fascinating!
Hello from Detroit Michigan brother thank you for sharing your knowledge and expertise
Jackson here 🤟
@@howiefeltersnatch2973 94/275
@@detroitredneckdetroitredne6674 94/127
“Hard work makes you feel good because you have accomplished something.”
I don't have scientific data, but I think plenty of perfectly nice weekends are being given over to the binge craze. We are binge - watching videos from ROBOT CANTINA😛😛😋😋
Water cooled heat sink was a great idea. Really impressed it extracted that much heat under load!
Imagine if he shaved some of the fins off of the engine and added a 560 mil rad to liquid cool the engine
Nice experiments, heat is the enemy. Thats why modern cars have multiple cooling circuits for Water and Oil with big radiator packs in front. Air cooling can do alot tho...
And that "waste" heat is a reminder of just how inefficient the ICE is. None of that energy actually moves the vehicle.
Did you know that on Sunday it is illegal to mow the grass in slovenia, which is coll thing so I can watch your video in silence
Same thing in Germany....
That's wild! Is it a religious thing? Or just a regular law??
I wish that was a law in the US.
Same thing in Switzerland
@@digitalchaos1980 a law based on peace and quiet time for the people. Also no noise after 10pm or before 7am. It works well. Less stress and more peaceful.
My lawn, appreciates your editing.
Mine too!
That was ingenious!
The experiments side of the project is the best part.
Looking forward to another great video from ROBOT CANTINA!
@@mommapanda5736 Awesome content here.
Hell yeah, K03 turbo! You can program those 1.8t vw engines with stock internals to over 400whp reliably!
Maybe 225hp go versions can go that high. But versions 150-200hp can go max 300-320
Also - 1.8T had K03, K03s or K04 stock
You can safely get 350 out of the AEB, the audi TT225 can take up to like 450.
@@devivoman ☺️☺️☺️☺️
@@kansasrose2909 Great content here.
You and this series has offered everyone a plethora of automotive/small engine knowledge and know how. I for one have really enjoyed each video to date. I wanted to stop and give a sincere Thank you.
🤣🤣🤣🤣🤣 ROBOT CANTINA has a great video this week. !
Thanks!
@@robotcantina8957 ☺️☺️☺️☺️☺️Oil is very interesting!!
@@kansasrose2909 Looking forward to another great video!
😉😉😉😉
I lost it when I saw the PC watercooling components. 10/10
Awesome content here.
@@kansasrose2909 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
I been following since mid season last year and this whole project has really inspired me! Just today, my good friend gave me the title to his old 88 civic sedan. Clean car, no engine or trans..... And I have a 22hp Kawi Vtwin sitting in my shop.......
🤣🤣🤣🤣🤣 ROBOT CANTINA has a great video this week!
Sounds like you got enough stuff to start a project. Keep in mind that on older Honda's the transmission is on the passenger side of the car and the engine spins backwards from normal cars. The Honda insight that I'm using has the transmission o the drivers side of the car and that is how I'm able to use the predator engine.
@@robotcantina8957 😚😚😚😚😚😚Oil is very interesting!
@@robotcantina8957 i think I may have that issue sorted by using a Mazda transmission.. Its some backwards compatibility knowledge that I learned when researching a Honda engine into a Ford Escort, which was Mazda based. Talk about Frankenstein-ing!
@@seymoarsalvage Looking forward to another great video here.!!
genius idea to water-cool it, never would have thought about it but it sure does keep my CPU cool
This is so much fun. These episodes could easily be twice as long. 💪💪
I am looking for a full length movie here,,,, 🤣🤣🤣🤣🤣🤣
ROBOT CANTINA had a great video this week...!!
I would love to be able to make longer videos.... but it also takes a lot longer the make them. We are trying to keep up with one video a week that is between 13 to 20 min.
@@robotcantina8957 It is great to see the experience and expertise here.
Looking forward to another great video soon~!
@@kansasrose2909 Me too!
When the little 420 blew its head gasket it was probably an "Oh no! Anyway " moment since it's an air cooled engine with no water jacket or oil lines running through the head like a common car.
2 days ago I found this series and now I'm All up to date.
I love your content. Keep up the good work
Looking forward to another great video from ROBOT CANTINA!
@@mommapanda5736 Do you think JIMBO will ever get this thing to 70mph??
Not sure if it's worth saying but I have notifications from a few youtubers with some with a few million subscribers and I always chose this video first. Time to watch!!!
Thanks!
@@robotcantina8957 Looking forward to another great video soon!
"All progress takes place outside the comfort zone."
Kei cars are my favourite cars of all, and I can't understand why similar legislation is not common outside Japan. They're all the car you really need, and they're fantastically inventive
@Alfred Wedmore I would agree with you had we not actually owned a Twingo (90bhp tce, not the GT) and it was a piece of junk. Engine sounded like it was trying to mix gravel in a blender, had big holes in the torque curve, didn’t want to rev, and wasn’t particularly economical (around 45mpg imperial). Also, the car was terrifyingly nose-light and would change lanes in crosswinds. Such a disappointing car, particularly given how cool they look.
@Alfred Wedmore ☺️☺️☺️☺️
It’s funny you mention gaming setups with water cooling. my pair of old school bazooka subs had a rare water cooling setup. Can’t find the original equipment but now I’m thinking I could use this idea..and save myself 4 hundred bucks. Subbed!
Pretty time consuming oil tests! Honestly, I don't know how you find the time for your private and professional life, do all these experiments, build the setups, make road tests and record / edit the videos - I guess you are in a time-warp zone :-)
Very interesting episode, as always!
It always baffles me when I see people with time for hobbies lol. No wife or kids dragging him away every 5 min?
@@howiefeltersnatch2973 I used to be like that, with wife, daughter, job and still had time for hobbies (but not at this level). Somewhere along the way I lost my steam, and now, that I'm turning into a couch potato, I can't find time for anything 🙂
Spindle oil we used on our swiss machines at my old machine shop was like supercharger oil to me. Thin like water because of the tight tolerances.
This is a brilliant piece of engineering! I love how the thing sound starting up and idleing.
🤣🤣🤣🤣🤣ROBOT CANTINA has a great video this week. !
@@mommapanda5736 😘😘😘😘😘Oil is very interesting!!
@@kansasrose2909 Fascinating!
I can't wait for the BONUS video!
“Only those who will risk going too far can possibly find out how far one can go.”
― T.S. Eliot
Teaching is a very noble profession that shapes the character, caliber, and future of the individual. If the people remember me as a good teacher, that will be the biggest honor for me.” - APJ Abdul Kalam
Aaron, you are the man, thank you for the turbos, cant wait to see how these guys use them!
Those small turbo's are K03 turbo chargers from the vw mk4 1.8t engine found on the jetta's, passat's and the audi TT's from that era, while tiny they can be good as long as there is not shaft play.
🤣🤣🤣🤣ROBOT CANTINA had a great video this week. !!
Looking forward to seeing the garden gnomes...
Just saw the video. Love the oil comparison. Never would have considered AT/PWR Steering fluid! Very cool!
Thank you!
@@robotcantina8957
@@mommapanda5736 ☺️☺️☺️☺️☺️☺️Oil is very interesting!!
@@kansasrose2909 Fascinating!
Is this thing going to get up to 70mph??
Wow that's a unique AIO liquid cooler, I've never seen one with the pumps integrated like that before, and twin pumps is definitely a unique concept. That it's still sold is equally impressive considering it's a 9 year old product.
Where would i find. One of the pump integrated fan?
Hello Mr. Copper Head Gasket! Meet Mr. Cylinder Head with combustion chamber shaped to taper the flat quench areas gently into the shape of the hemi combustion chamber! We're having fun now!
😚😚😚😚😚😚Oil is very interesting!!
@@kansasrose2909 Fascinating!
I find television very educating. Every time somebody turns on the set, I go into the other room and read a book.
Books were my pass to personal freedom.
If you would tell me the heart of a man, tell me not what he reads, but what he rereads.
Nice work bro your killing it 💪 just a quick note the second turbo out the box is called a ko4 turbo from a 1.8t 20v vw,audi,seat,skoda rated for around 320bhp good luck friend have fun 👍
🤣🤣🤣🤣🤣 ROBOT CANTINA has a great video this week. !
Looking forward to another great video.... soon!
@@mommapanda5736 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
Who else find this content intresting cant wait for the next video 😎keep up the good work 👍
Cheers to ROBOT CANTINA and JIMBO.🤣🤣🤣
@@mommapanda5736 We have another great video to enjoy.
@@kansasrose2909 Great appliance of the science as we toil with the oil.
@@mommapanda5736 Looking forward to more from ROBOT CANTINA!!
@@kansasrose2909 Rose... this is great content.
Over 10% of views on this video have thumbs up ,way to go!!!
This channel is going to blow up for sure
🚙🚙🚙🚙🚙👍👍
@@kansasrose2909 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
Awesome work get that intercooler in and head gasket fitted!
My electric project is getting there I've got spinning motors now time to unjury rig everything and go for semi permanent install and test drive!
Good luck!
@@robotcantina8957 🤣🤣🤣🤣
Looking forward to another great video soon!
"All progress takes place outside the comfort zone."
A rebuild on the turbos and they will be excellent I ran one that size on a motorcycle and it worked great
I'm going to recommend oil cooling for both the engine and supercharger. While the head is off, I'd also recommend porting and polishing it. Maybe even sanding the head down a few mm to increase compression. Of course the results would be negligible, but you seem to love toying around with this thing and seeing what results you get. Awesome content for us! (I'd also reccomend an upgraded cam, this can really wake up the engine, but It would require a complete teardown.)
Awesome content,... 🤣🤣🤣🤣ROBOT CANTINA had a great
video this week. !!
@@mommapanda5736 Awesome content!
@@kansasrose2909 I am enjoying the build.
PC builder here... It's a good idea to use an radiator like that to keep the supercharger cool. At any rate, it will at least help with the overall life of it. A couple things I saw that you'll want to keep an eye on. One (that's already been mentioned) is to make sure you have an inhibitor of some kind in the fluid. Tbh, some antifreeze should be fine but I wouldn't mix it too hard as I don't think the pumps can take it. Another is the hose you use; that clear tubing looks like what you get from ACE or a farm and home supply store. That tubing is typically rated up to 80C before it starts to break down so it may not be a bad idea to try and find some automotive hose (tranny lines maybe?) to replace it. Otherwise you could gunk up the whole cooling system and having to replace it.
I feel like this was just more of a test to see if it worked, and isn't going to be permanent, but in case it is. :)
🤣🤣🤣🤣🤣ROBOT CANTINA has a great video this week. !
@@mommapanda5736 Genius use of computer hardware.
awesome content here.
@@kansasrose2909 I come here for the videos and stay for the great comments on this channel..👍👍👍
Ah, finally blew the head gasket. The PC cooler was a nice touch to handle the stupidcharger temps.
Yeah, eventually it was going to pop the gasket. The little engine will be all fixed by tomorrow.
@@robotcantina8957 🤣🤣🤣🤣🤣
@@mommapanda5736 😚😚😚😚Oil is very interesting!!
@@ericschumacher5189 Robot, we love your videos ☺☺☺
"All progress takes place outside the comfort zone."
Another fun video, do glad you're back for season 2. Can't wait for the next one. Keep on making these videos!
Thanks! Will do!
@@robotcantina8957 🤣🤣🤣🤣🤣
@@mommapanda5736 😚😚😚😚😚Oil is very interesting!!
Looking forward to another great video soon!
@@kansasrose2909 Me too!
Hahaha not only is that solution practical it's also very cool looking. They make colored fluid for PC water coolers too. Could be a classy touch and make it car show ready.
awesome content here.
Hey Jimbo! Aaron here! Hope those add to entertainment and science value! I'm a turbo guy to say the least!
The larger of the two is a K03-15 Found on Audi A4 and VW Passat 1.8T From 1997 to 2004. Too large in my opinion for a 420cc. The smaller turbo however is a variant from a lower RPM diesel 1.9TDI I believe from A 1993-1998 Jetta TDI with a smaller exhaust turbine and housing. I do believe this one will see positive pressure on engines in that range, especially with EFI and an operational RPM over 3000. I would recommend artificially reducing the size of the exhaust housing inlet size if you plan on using it on a smaller engine to increase the focus of exhaust pressure.
I have reason to believe the smaller turbo may solve some issues or add to this current project as well. If used for another project, that would be cool too.
Hope these tidbits help!
Yes, I just made a note of your info, After the first few days, the comment section gets too big and I typically cant go back and find stuff that folks have written.
Hi Aaron, Thanks so much for the Turbos!
@@robotcantina8957 Love these videos💖💖💖💖
Nice use of the watercooling setup for a gaming rig, and handy that the fans on it are by default 12v so easy to just plug in & play... :D
Yes, exactly
@@robotcantina8957
Great appliance of the science as we toil with the oil.
@@mommapanda5736 Looking forward to another great video soon!
@@kansasrose2909 🤣🤣😂😂😂😂
Sure wish I would have seen this 6 months earlier. In the event you revisit this down the road, a few helpful bits learned from the jet engine and high performance worlds:
Jet engine oil is mostly used as a heat extraction medium, with lubricity being a relatively distant secondary principle. It's fairly thin in terms of viscosity, more like warm maple syrup, but used in tandem with an oil cooler, it is remarkably effective as a thermodynamic system in moderating temperatures.
Your charge intake air can be Cooled by the methanol injection if done directly after compression, preferably in as long a tube to your induction chamber as allowed. The methanol, when injected as fine mist, will evaporate heat and enter the combustion chamber nearly in an ideal gaseous state. Maximum compression and its significantly higher octane rating means you can get more power out of your air fuel mixture. On that note, as I'm sure you're probably aware by now, you'll need a richer ratio than 14.7 as methanol has a lower energy density than gasoline. Working with the intercooler, you get a nice, cool, dense intake charge and can run higher boost to compensate for the lower energy density.
On the flip side of all this, most combustion engines get maximum Efficiency the hotter you run them (but less overall power, naturally). The longstanding belief that *watercooled engines get max efficiency with acceptable power at 190-205*F is the "ideal" temperature, whereas air cooled engines can go up a bit with significant and sustained airflow past the cylinder fins. Having enough air to both come into the engine bay and good routing in extraction (hood ducts, extraction channels beneath the vehicle, whatever works for your design) will improve overall system efficacy. NACA ducts work surprisingly well with air cooled applications, both as a moderate enhancement for air compression and lowering drag. Placing them on leading edges works best, though it's not always aesthetically pleasing to do so. If function follows form on this project, you'll be far better off for the effort.
Incorporating as many of these as you can to balance performance with design protocols and packaging limitations makes for a very challenging project to tackle, and I look forward if you get to modify your later vehicle with the V-twin!
Love this channel and project. Makes my day when a new episode comes out. Thank you for this amazing series. Fantastic work
Cheers to JIMBO and ROBOT CANTINA🤣🤣🤣
@@mommapanda5736 Love the oil comparison here.
@@kansasrose2909 Me too.
Air to water cooler is how the Saturn ion redline and early chevy cobalts were. They sold a dual pass end plate as part of their factory stage 3 kit. Your make shift kit reminds me of that car! Fun times
awesome content here.
@@kansasrose2909 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
Remember that it’s a journey.
Becoming a positive person doesn’t just happen overnight. You are trying to rewire your brain’s natural instincts, after all. But as long as you consistently work at having a more positive outlook, your mind will eventually follow.
"All progress takes place outside the comfort zone."
@@mommapanda5736 I don't have scientific data, but I think plenty of perfectly nice weekends are being given over to the binge craze. We are binge - watching videos from ROBOT CANTINA😛😛😋😋
Those VW turbos look to be the same size as the one on the 1.9L TDi I once had...it was tiny cuz it blew an engine that only made 89HP...but it's the only car I've ever had get damn near 300k miles and average about 55mpg no matter how I drove it (500,000km and 23.4km/L)
(I mean, with an 89HP diesel there's only one way you CAN drive...slow as hell)
Oh, and I sold it with 300k for damn near what I paid when it had 150k - PRE-COVID!
I really do miss that car...
I have a VF-40 turbo from a Subaru in my garage. The impeller looked like it ate someone's 10mm socket!! 🤣
I could send it to you to add to your collection 😁🤣
The P.O. Box address is in the description. A busted turbo may come in handy for some experiments. If you do send it, please put a not in the box. :)
just for the hell of it, i'd love to see a riding mower 2 cylinder engine put in this thing haha
We sort of have plans to try that on another car.....
@@robotcantina8957 I can’t wait to see that one! It’s fun seeing these little engines in a car lol..
@@mysteriousghost4852 Looking forward to another great video soon!
@@kansasrose2909 Me too!
Do you think JIMBO will ever get this car to 70mph??
For engine temp .I would use a metal strap or pipe clamp to put it on the head in contact with the head.
Man I love this series! I almost don't wanna see you swap the 420 for a 670 😂
Yay turbos. You can see now why turbo yoda doesn't like superchargers and calls them hot air makers xD What a technical machine you've created, quite an accomplishment.
He doesn't have have a problem with all superchargers, just roots blowers.
I agree w/ Al but will argue that while blowers are crap (despite being super cheap and easy), twin screw superchargers are very competitive with turbos for street applications
@@krakhedd agreed. turbos make more peak power but twin crews make more torque under the curve critically in the primary operating speeds of street engines. i recommended them for everyone for their street applications.
@@cmcbunch I wanna see those turbos plumbed through a twin screw, but he's already lifting the head at 1/2 bar so maybe 5 bar of boost isn't such a great idea 🤣
@@krakhedd I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
“Don't use the phone. People are never ready to answer it. Use poetry.”
― Jack Kerouac
Using CPU cooling for the supercharger is pretty ingenious.
🤣🤣🤣🤣🤣ROBOT CANTINA had a great video this week. . !!
@@mommapanda5736 ☺️☺️☺️☺️☺️Oil is very interesting!!
Why didn't I receive my early notification 😫 . It would've helped my work day go by a bit faster listening to such quality content.
🤣🤣🤣🤣🤣ROBOT CANTINA had a great video this week. !!
@@mommapanda5736 😘😘😘😘😘😘Oil is very interesting!!
@@kansasrose2909 Looking forward to another great video soon!
I love that you installed a GPU water cooling unit on the super charger. Nice work.
Am i the only one who looks at the super charger and sees a monocle and a little top hat on it? It looks very sophisticated
Indeed, very sophisticated🧐🧐🧐🧐!!
You are not the only one who sees that. Another viewer sent me the same comment and actually send a reworked picture with the hat and monocal... it was awesome.
@@robotcantina8957 This is appliance of the science as
we toil with the oil.
@@mommapanda5736 Looking forward to another great video soon!
@@kansasrose2909 What happened to the garden gnomes??
I am amazed by your abilities.
🤣🤣🤣🤣🤣ROBOT CANTINA has a great video this week!
@@mommapanda5736 Yes.. Love these videos💖💖💖💖
@@kansasrose2909 Looking forward to another great video soon.
@@mommapanda5736 The goal was to get this thing up to 70mph right??
you should put a diode on those fans, because if they spin from the air they could generate higher voltage and fry something or damage themselvs
Another fantastic vid and if ur blowing head gaskets means ur getting some power down now
@@kansasrose2909 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
Twin turbo big block Honda Insight sounds exciting…..
Awesome way to start my Sunday! Thanks again for another great vid, Jimbo! Several years in the future we will be watching as you shove a nuclear reactor into a a Dihatsu or something similar! 😆
Looking forward to another video from ROBOT CANTINA!
@@kansasrose2909 Me too!
@@mommapanda5736 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
Love your work, Jimbo 👍
🤣🤣🤣🤣ROBOT CANTINA had a great video this week. !!
@@mommapanda5736 🤓🤓🤓🤓🤓Oil is very interesting!!
@@kansasrose2909 Fascinating!
Nice work on the supercharger temps.
Blown head gasket? That's what happens with "blown" (supercharged) engines.
Can't wait to see the fix (copper head gasket, maybe?).
Also, stronger head studs/bolts?
🤣🤣🤣🤣🤣ROBOT CANTINA had a great video this week!!
Looking forward to another great video soon!
Sweet
🤣🤣🤣🤣🤣
@@mommapanda5736 Sweet... I am going into a diabetic crash this video is so sweet😛😛😛😛
@@kansasrose2909 Looking forward to another great video soon!
How about some pancakes and syrup!
@@mommapanda5736 Sounds good... Banana pancakes please..
Lol as a gamer/pc enthusiast who has a water cooled pc this episode was especially amusing. I am surprised it worked that well.
So in the end this thing is going to be an air cooled, water cooled, meth injected, intercooled, supercharged, cement mixer engine. Did I miss anything?
... that somehow still sounds like a Honda...
@@willgilliam9053 Especially that last part :D
Yeap, fuel injected (originally work with a carb).
Next week we will revise the long list of what this thing actually is.... lol
@@tcar Oh yeah. So: Air cooled, water cooled, intercooled, meth injected, fuel injection, supercharged, big block cement mixer engine.
That AC delco oil gets REALLY ripe after a couple hundred thousand miles… I’ll never forget that smell.
take a look at a polo g40, they have a air bypass if throttle is closed. and it is also mounted very close to the exhoust.
ill never get over that snappy sound it makes, its got a note only a mechanic could love :D
awesome content here.
@@kansasrose2909 Did he install the flux capacitor yet?
13:25
Be me, building a water cooled PC. :D
I have never seen cooling fans that are also water pumps :) that is pretty brilliant.
🤣🤣🤣🤣🤣ROBOT CANTINA has a great video this week. !!
@@mommapanda5736 The cooling fans got me!
@@kansasrose2909 Looking forward to another great video soon!
I would love to see another un = boxing video
Did he install the flux capacitor yet?
Aw come on jimbo besides robot Cantina fishing is my 2nd favorite thing
you have the patience of a god
😇😇😇😇😇😇
Another long awaited video
🤣🤣🤣🤣🤣ROBOT CANTINA had a great video this week. !!
@@mommapanda5736 Yes, it was... 😊😊😊😊Oil is so interesting!!
@@kansasrose2909 Fascinating!
@@mommapanda5736 😊😊😊😊
There were turbo kits for some Kei cars which used an IHI RHB31 turbo. Suzuki Cappucino was one I think I have both the AMR300 and an IHI turbo. The turbo will shortly be going back on my FZR125 twin, #2. #1 was blown up on the dyno. Those IHI turbos work really well on small engines so well worth giving it a try.
Do you think JIMBO will ever get this thing to 70mph??
possibly.
it'll be cool to hear turbo noises in future episodes from a small engine, that's for sure. and man a blown head gasket, would've been a real pain on an engine built for the car, but thankfully dis- and reassembly of the cement mixer one won't be too bad. can't wait to see the power it's gonna make with the intercooler though :D
🤣🤣🤣🤣🤣🤣ROBOT CANTINA had a great video this week. !!
@@mommapanda5736 ☺️☺️☺️☺️☺️☺️Oil is very interesting!~!
@@kansasrose2909 Looking forward to another great video soon!
@@mommapanda5736 Do you think JIMBO will ever get this thing to 70mph?
Intercooling a blower is important; they're made to move air not compress it, which is part of why they're so inefficient and create so much heat (ergo the need for an intercooler)
Twin screw superchargers are MUCH more efficient (and expensive), yet still benefit greatly from intercooling
In the context of boost:
Heat = inefficiency = lost power
---also--- don't compound with the Roots; as per above, it is a blower NOT a compressor, and if you compound you will definitely want a twin screw
Peltier intercooling supercharged cement mixer street legal go kart!!!! DO IT!!!
😘😘😘😘😘😘Oil is very interesting!!
@@kansasrose2909 Is oil expensive?
@@mommapanda5736 Have they tried canola oil?
@@kansasrose2909 Who knows! Looking forward to
more great videos soon.
Yo dude this is amazing man I'm still trying to get my amr500 for my 1.8 16 efi like I'm surprised this motor is handling this amr300 man you just made me understand more of it keep up the good work dude and the turBo at the end was sick hard to find a small one like that keep up the good work man
🤣🤣🤣🤣ROBOT CANTINA had a great video this week. !!
Looking forward to another great video soon!
@@mommapanda5736 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
I'm imagining a twin turbo single cylinder engine an I like that
awesome content here.
You might try a copper head gasket
Yes!! Copper head gasket... give it a go!!
@@mommapanda5736 Looking forward to another great video soon!
@@kansasrose2909 Me too!
That cooler really worked well.
I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
Kubota Saturn SL Turbo? I’d strongly approve of that. Great video!
Hmmmm.... So you noticed the Top Secret Saturn project.....
@@robotcantina8957 🤣🤣🤣🤣🤣
@@mommapanda5736 I am curious about the Top Secret Saturn.....😜😜😜😜😜
Top Secret!
@@kansasrose2909 Do you think JIMBO will ever get it to 70mph??
Great job man.
🤣🤣🤣🤣🤣🤣ROBOT CANTINA had a great video this week. !!
Looking forward to another great video soon!
@@mommapanda5736 The goal was to get up to 70mph right??
@@kansasrose2909 I am a proud member of the ROBOT CANTINA fan club. Love the content
and LOVE the humor of the channel. 👍👍👍
That 1.8 hairdryer turbo is plenty, trust me. Idk if that's the KO3 or KO4 but the 3s suffered heat soak while the 4s had better thermals. My 1.8 VW had 15 psi from one of those little things before it dropped a valve and that was far less than the turbo wanted to go. I've heard they can push past 35psi easily on a 1.8 but obviously then you're wearing the lifespan of the turbo. Anyway, might be worth a shot! Don't knock that tiny turbo until you try it 😅
Looking forward to another great video from ROBOT CANTINA!
This is so much fun.
I’m surprised that the head gasket made it this far.
Me too. I reckon the new gasket may suffer the same fate after a few high speed runs. ...
@@robotcantina8957 you might have to ring the head like they do on the ford 6.0 diesels because they all blow head gaskets so easy. Its just a small wire you put in the but im sure you knew that, youre always a step ahead.
@@safetylast911 Looking forward to another great video soon!
@@kansasrose2909 Me too!
Kei Cars are Awesome.
Watercooled Supercharger, this is getting so complex, i love it
The channel "2StrokeStuffing" has a build with a Aisin AMR300 supercharger. You could try asking him what kind of oil he uses.
Mowed my lawn Friday in preparation.
Thank you for being prepared!
@@robotcantina8957 🤣🤣🤣🤣
@@mommapanda5736 🚜🚜🚜🚜🚜Yes to lawn mowing!
Looking forward to another great video soon!
@@kansasrose2909 "All progress takes place outside the comfort zone."