Most Durable LMT Axles! How To Install Treal Hobby Axles On Losi LMT
Vložit
- čas přidán 26. 06. 2024
- NOTE: I put the Front Treal Spindle Carriers on the wrong way. I had them on the right sides, but the logo should be facing out. They put their stop on the opposite side that LOSI used which is what I was using as a reference since they don't have instructions on how to do this. So Right goes on the Passenger side of the vehicle with the logo facing the front/outside of the axle where the Treal logo is.
I've mentioned in past videos that I've broken a few LMT axles during the abuse I've given it. I've been trying out axle braces and now am showing you the all-new Treal Hobby 7075 Billet Aluminum axles for the LMT. They have large bearings and should be able to hold their own.
If you have a hobby shop, please have them order you one locally. If not, these affiliates links helps support this channel.
Treal Front Axle: bit.ly/CPE-LMT-AXLE-F
Treal Rear Axle: bit.ly/CPE-LMT-ALXE-R
Losi LMT RTR Grave Digger or Son-uva Digger: bit.ly/LosiLMT
Losi LMT Roller: bit.ly/LMTroller
Freestyle RC LMT Accessories: bit.ly/FreestyleRC-LMTparts
Freestyle RC Servo Savor (currently sold out): bit.ly/FreestyleRC_ServoSaver
Reefs RC Raw 500 Servo: bit.ly/reefs_raw_500
Click to subscribe ⇨ bit.ly/Sub-CCxRC
#treal #losilmt #reefsrc
SUPPORT THE CHANNEL:
The channel is supported by affiliate link that don't cost you any extra money, but does give me a percentage of the purchase price for directing traffic their way.
CCxRC Shirts and Merch ⇨ teespring.com/stores/ccxrc
Where I Buy RCs Online: Horizon Hobby ⇨ bit.ly/Horizon_Hobby
Amazon ⇨ amzn.to/2TMmmHT
Support Via Paypal ⇨ paypal.me/ccxrc
SEND US MAIL: I love getting stickers and other cool things you guys send. If you have something you are trying to send to CCxRC, you can do that here:
CCxRC
PO Box 16802
Chesapeake, VA 23328
----------------------------------
Connect with CCxRC
----------------------------------
Facebook ⇨ / ccxrc
Instagram ⇨ / ccxrc
Twitter ⇨ / ccxrc
----------------------------------------------------------
Best CZcams Account Management
----------------------------------------------------------
Tube Buddy ⇨ bit.ly/YT_TubeBuddy
----------------------------------------------
Disclosure
----------------------------------------------
The product shown in this video may have been sent to me for review. Regardless, I do not get paid to make the videos but many of the links contained in the description are affiliate links and I may benefit from a small commission if you purchase something using the links. It is my duty to you to provide you with my honest and unbiased opinion about the products that appear on this channel to help you make informed decisions. If you plan on making a purchase and want to support the channel using the links, I thank you in advance. I look forward to making more great reviews for you.
NOTE: I put the Front Treal Spindle Carriers on the wrong way. I had them on the right sides, but the logo should be facing out. They put their steering stop on the opposite side that LOSI used which is what I was using as a reference since they don't have instructions on how to do this. So Right goes on the Passenger side of the vehicle with the logo facing the front/outside of the axle where the Treal logo is.
Why did you change the steering stop Treal? Why Treal? Why? People without instructions are going to do what I did and look at how their last ones came off and that steering stop would be the most logical reference point.
Thanks to mavrick0pm for pointing this out.
Where do you get all your tools to work on these small hex’s and screws?
@@matttapscott48 at my local hobby shop. Most can be bought on Amain or Amazon in an RC hex driver set.
I guess it’s time. Tearing it apart now to install Treal axles front and rear.
Tips and tricks appreciated!
Wow those are sweet Tony, yeah I’m sure they’ll hold up appreciate you sharing
They look epic mate 👍
Nice review of Treal axles Tony
I think they will hold up hold up better than the plastic in all temperatures👌👍 Aluminum can break But I'm giving the big thumbs up👍🚜
Yeah well worth it, I went with the silver they look so awesome
Thanks for making this video 🎉 im going to go with the blue color ✌️
Super slick awesome Truck👍👍👍🇺🇲
Brother you have no idea how much I appreciate this, i just got my son and my self both trucks and my son ended up breaking his front axle, I just ordered both front axles but had no idea, I’ve seen a couple of videos but nothing detailed as yours, if you have any rear steering upgrade video fully detailed as this one please let me know. Once again thanks a lot🤜🏼🤛🏼
Glad it was helpful
Dang she just got THICK!! 😎🤘 sweet axle holder there too!
Great video
Hi Tony & Gandolf cool video very informative, those axels look much more durable than the plastic braces if that day comes when my stock axles break $672 for 4 axles as I have both rtr Diggers not trippin tho keepin them stock as long as possible & OR isnt as cold as VA, keep up the awesome footage see ya in the dirt 😎👊
Looks nice. Who makes the axle stands?
First great video tony!!!
I have the Vitavon axles. They both look awesome tho!!!
Nice, I know you were on a mission to fix this.
Where did you get the differential housing stand you used?
Have you or anyone you know changed out the gearbox housing. Just received my Treal housing and not exactly sure where to start.
Hey did u have hard time removing the drive shaft? I stripped the grub scew cause its so tight. Any adivise?
Where did you get those hex tips? I could chuck them right in my garbage skil driver.
Are the stock ones that weak? The two new ones you put on cost 60% of the truck new.
😁👍Looks good! 😜 Now go break it!
What size is the LMT axle shaft? I purchased a set off Traxxas 12mm aluminum wheel hexs and was wondering if the center hole is big enough for the threaded part of the axle shaft. Would I need to purchase traxxas part# tra6869 which has a bigger hole in center for beefier axles.
Damn those are nice! Why is there so much toe on the rear axle? Or any for that matter?
The toe in helps the truck feel more stable. I'm wondering if it helps with the pull to the right i was feeling. These axles seemed to track straighter.
Cool looking axles.. should do the trick.
Pronoob Rc put out a video fitting the screw-in traxxas control arm pins to replace the king pins that back out. Check it out if you haven't seen or heard about this mod... was super easy.
Cheers mate👍
I saw that trick on Facebook. Very easy solution. Maybe losi will just make one that is the right size
Nice friend ✔🚙 💨💨
They look great and should hold up to tons of punishment. I think the stock housings should cost half of what they sell for $20-25. It seems as if the outer housing (Large front piece of each) needs to be produced using a more durable/flexible composite that could hold up to colder temps (in the 50 degree and up range). Like CCxRC Tony said, there were no issues until the weather dropped in temp. I hope Losi considers using a different plastic even if it is offered as an upgrade to stock. The Treal units quality and machining/material certainly equals the price, but for many it is not a financially capable option. Braces I guess will suit most...or RPM to the rescue?!
I think they need to make the plastic less pieces. The problem is it flexes too much. I'd go solid pieces like the treal but in plastic....or like the Axial axles. There's just too many pieces and then screws to hold them all together.
@@CCxRC totally agree tony i just broke my lmt today right down the center of that seam like yours did
@@CCxRC they wouldn’t have to go full on metal everything like a beefed up EXB or something, but some metal in a few strategic areas would have been immensely helpful. Not crazy about adding weight to my truck!
How much dose LMT cost? You don't shoe goo your bodies at all ?. I just repaired a pretty much destroyed x-maxx body with the shoe goo and drywall tape. Very very impressed. And its cheap. A little time consuming. 👍 Good vid
$649. With two spektrum batts, spektrum charger. $1002 from Tower Hobbies.
i am trying to figure out what truck i should buy my kid SMT/LMT? i have been looking at the scx24 scale monster trucks too. he is obsessed with monster jam, has like 10 toy grade RC , 1000 1\64 scale diecast, and 40 1\24 scale diecast, not to mention all the micro series lol. i am going to slow the hobby grade down a little with a pinion and motor downgrade but i want to get him something LEGIT. he loves my scx10v3, trx4, bigrock, limitless, etc but i dont want him to break those lol.
I'm not sure which way is 100% correct on the c-hub. I thought the same as you at first with the steering stops in the same location as the plastic ones but then noticed that the 5 degrees that are suppose to be on the Treal axles wasn't there. So when I looked on their website the pictures show them with the steering stops facing forward and all the Treal logos on the same side. When I built mine that way you can see the 5 degrees that comes with the axles.
You are right. I looked at the website and they put the stops on the front. Why Treal? Why? That was my reference point as they didn't supply any directions. I guess I'll be flipping them...though it handled well this way.
Is it toe in or out
@@CCxRC It's 5 degrees of castor that Treal adds to their c-hubs.
@@mavrick0pm Ok. Sorry. I thought it was a toe in. I'll have to go back and set mine up properly
My stock ones are holding up, but I've see that RC4WD has released complete axles with internals... Pricey though. You should try get a set and compare with the ones you are running now.
After seeing what the Losi internals can handle, I wouldn't go with the RC4WD ones. I'd rather get metal casings for the LMT internals. RC4WD parts are hard to come by. I believe LMT is going to be the standard for aftermarket parts. You don't see that with the RC4WD stuff.
@@CCxRC I have to agree. The LMT sets standards all around, except for axle casings. I bought a nice launch ramp. Gonna see how it flies. Hopefully the axle casings hold up cause all I can source here is RC4WD’s aftermarket replacements and they cost about $300 a set.
@@Triggered-RC yikes. Do the RC4wd work with the Losi internals or you just mean you’d have to switch axles completely? I haven’t seen anything but the scale axles they made before and the ones they now make for their RC4WD monster truck
@@CCxRC They include their internals. Here’s a taobao link to a front axel item.taobao.com/item.htm?id=38644298142
Which I guess is the only axel. Need to either go 4 wheel steer or throw a link on the back to keep the rear straight.
For the aluminum rear end can you tell me where to get them you said New York in somewhere else If possible can you give me the address thanks I appreciate it because I cracked my rear end and a half thanks
Very cool, btw right side is the “passenger” side on a vehicle, drivers side is left on that particular truck
Right. That's what I said. It would be on the driver's right hand side. I point to the left and said if you are the driver "here" then it the right would be over "here" and pointed to the right. Saying passenger side would've been easiest.
@@CCxRC ahhh oki hahaha yeap it always confusing lol, i was just worried you would put it on the wrong way, it looked like a dang fine axle set up
@@ragnarok5056 what I did do wrong was it was supposed to go logos out. They put their steering stops on the opposite side that Losi did. Without directions that is confusing
@@CCxRC i can imagen, im looking to get one of these trucks for my self, i bought the traxxas summit 1/10 for my son, but these dont sell in Norway unfortunately, and thypical i want the LMT the most 😂
Hey man what shocks would you recommend to replace the stock? I broke one and would want to upgrade
I’m running stock on all of mine with no plans to upgrade them. If I did...I’d probably look at the Pro-line XT shocks
@@CCxRC would you then instead recommend thicker oil? I'd just like to avoid breaking it again. I appreciate your input
What is the purpose of the 5 degree toe over the 0 degree?
supposed to have better control.
It should be awesome
Awesome axles what's the Cost$$$🇺🇲😎👍
Passenger side just thought I’d throw that in there
Treal and their paid off Facebook posters are the absolute worst, I will never give them a single penny. Vitavon has 7075 axles coming next week, much nicer final product and is someone with morals that I can actually support.
I have not come across any of them. I know of one person who is sponsored by them and they don't get anything but a discount on purchases. I paid full price for mine, but haven't had any dealings with Treal other than buying their SMT10 steering links. I haven't had any deals with Vitavon, but plan to wait and support Hesse Machine when his come out as he has been in the RC monster truck game for a long time and they are made in the USA. I just wanted to test these and see if the the fit was good for people who may be afraid to drop the money. I'd say they are very impressive.
Those look great... put some better shocks on it.
These shocks work pretty great in my opinion. Might change the oil in them, but the shocks themselves have been good
instead of the stress going to the axles, it might transfer to the links and break them.
Plastic Axle like 50 bucks each ,so breaking a links is cheaper then that axle .by alot.
@@hoosier-daddy437 i figured that, i was just digressing.
I've bashed it and the links hold up better than any other trucks links I"ve run. Not breaking rod ends all the time.
@@CCxRC well that’s good. the axles do sure look nice.
If the bearings are that hard to get in the are going to be impossible to get out. It's really going to suck when your $2 bearing makes you $200 axle completely useless
You could tap them out with a small screwdriver with the input gear removed 👍
@@PatsRC not when the outer race comes off like they normally do when the bearing explode :P
oh should i use my tax return money to get one of these!?! Awesome little trucks
Depends if that is play money or not :)
Good point. Since im a home owner I better put that money in savings. I think my water heater is on its way out. Dang responsibilities
First
Man those axle housing are pricey $168.00 per axle...DAG NABBIT 🤯
Yeah. They are pricey, but make it soooo tough.
@@CCxRC yes it seems so thanks for buying and posting the video 👍👍
Can't buy parts for these anywheres not even stock parts everything is sold out!! Mine is still brand new in the box I might just sell it and get something less popular so that nobody is gonna be buying up all the parts amd upgrades
Junk