Hello, can I know what input you use for your hfs3 kit ? Map or idc ? I don't understand why Aquamist says that only their hfs4 system is adapted to the Mini r56 N14 engine.
Brandon Lee I recommend Mario Plaza out of California heâs on Modified Miniâs group on Facebook. Stage 3 would need to be RPM now. Manic no longer does stage 3.
Hey thanks man, I'll check em out. I'm very excited to see how it turns out once tuned. It's been fun throwing all these bits and pieces on it, and the last piece of the puzzle is seemingly the most important which is finding a competent tuner. I had a mini tuner out of dallas try to tell me that forge isn't worth a shit, and water/meth is a terrible idea and he won't tune for it. I'm like eh if you say so. Seems like plenty of people have great luck with it.
Jean Dandrea Stock internals Mod list 2007 Mini Cooper S Custom short K&N typhoon cold air intake JCW turbo Kompack dual port bov 3 inch downpipe Custom straight midpipe Magnaflow cat back muffler exhaust Alta intercooler HFS3 Aquamist water meth injection (best idea) BC racing coilovers with Swift Springs 23 mm rear sway bar set to stiffest setting Hawk HP plus pads OEM rotors Hoosier A7 tires (had Federal RSRâs) Powerflex bushings throughout Quaife LSD OS Gliken Touring flywheel and clutch Manic stage 3 tune 244WHP GoNMF oil additive New for 2018 big wing and carbon fiber sunroof replacement. This was done spread out over a year Instagram @jetsmini CZcams Www.czcams.com/users/jetsr6
Hidden Serpent 357 here Iâll give you this list. đ Mod list 2007 Mini Cooper S K&N typhoon cold air intake JCW turbo Kompack dual port bov 3 inch downpipe CNT mid pipe with resonator Magnaflow cat back muffler exhaust eBay intercooler (bad idea) HFS3 Aquamist water meth injection (best idea) BC racing coilovers with Swift Springs 23 mm rear sway bar set to stiffest setting Hawk HP plus pads OEM rotors Hoosier A7 tires (had Federal RSRâs) Powerflex bushings throughout Quaife LSD OS Gliken Touring flywheel and clutch Manic stage 3 tune GoNMF oil additive New for 2018 big wing and carbon fiber sunroof replacement. This was done spread out over a year Instagram @jetsmini CZcams Www.czcams.com/users/jetsr6 Ran 2017 SCCA SMF class. Three 1st places. One 3rd place. In 2017 Central Pennsylvania Region Ten 1st places out of ten in the novice group based on PAX times. 2018 sponsors GoNMF Motorsports Ammo
Jeremiah Thomas I have a Mini R56 JCW AEM ram intake, intercooler muffler delete (pointless muffler), Milltek Sports cat. Saving for an intercooler then a remap. Any advice/reccomendations on anything else along the way? I do want a recirculation valve rather than atmospheric dump valve. Im going to research yours now and a few other of your mods. Thankyou and car sounds and looks beautiful on acceleration.
Troy Guerrero thatâs a good possibility for that much hpâs. May need a stage 3 map to get that turbo to work correct. Manic doesnât offer stage 3 anymore. You would have to go with RPM. By the way 10k later itâs still running like a champ.
Nice video
Hello, can I know what input you use for your hfs3 kit ? Map or idc ? I don't understand why Aquamist says that only their hfs4 system is adapted to the Mini r56 N14 engine.
I have a same car as you haveïŒand use the manic srage3đ
Hey I have a question i hope you can answer, do you think my automatic trans of my 13' mcs can handle like 300/350whp reliably? n18 motor
Jean Dandrea reliable no. If I were you I would check out the mini forums they would probably have more of a detailed answer for you.
Who tuned you? I've got everything except water/meth to go stage 3 on mine and I'm having trouble deciding who to take it to.
Brandon Lee I recommend Mario Plaza out of California heâs on Modified Miniâs group on Facebook. Stage 3 would need to be RPM now. Manic no longer does stage 3.
Hey thanks man, I'll check em out. I'm very excited to see how it turns out once tuned.
It's been fun throwing all these bits and pieces on it, and the last piece of the puzzle is seemingly the most important which is finding a competent tuner.
I had a mini tuner out of dallas try to tell me that forge isn't worth a shit, and water/meth is a terrible idea and he won't tune for it. I'm like eh if you say so. Seems like plenty of people have great luck with it.
Can you PLEASE tell me where di you get the 3" down pipe? I'm having a hard time sourcing one. I can find 2.5" all day. Thanks
I got it a long time ago. And the one I have now was an APT kit that included gtx turbo and 3â downpipe.
hi what software do you use to get those trip stats ? i use DashCommand but it cant read those stats like horse power , torque ect. (r56)
Devian it should be there on DashCmd. Try swiping when on the dashboard.
@@jetsmini tnx
Can you tell me the operations that you did on this engine? I have an mini cooper r56 120 hp, how i can encrease the power?
Pull a turbo kit off a mini turbo for the junk yard
Was this on stock internals? can i get a full run down
Jean Dandrea
Stock internals
Mod list
2007 Mini Cooper S
Custom short K&N typhoon cold air intake
JCW turbo
Kompack dual port bov
3 inch downpipe
Custom straight midpipe
Magnaflow cat back muffler exhaust
Alta intercooler
HFS3 Aquamist water meth injection (best idea)
BC racing coilovers with Swift Springs
23 mm rear sway bar set to stiffest setting
Hawk HP plus pads
OEM rotors
Hoosier A7 tires (had Federal RSRâs)
Powerflex bushings throughout
Quaife LSD
OS Gliken Touring flywheel and clutch
Manic stage 3 tune 244WHP
GoNMF oil additive
New for 2018 big wing and carbon fiber sunroof replacement.
This was done spread out over a year
Instagram @jetsmini
CZcams Www.czcams.com/users/jetsr6
what is the software you are using to get these numbers?
Jeff Colby thatâs DashCmd on my iPhone that I screenshot. Think itâs $10 and you need a WiFi obd2 elm adapter
good video... that is your only bolt on mod?
Hidden Serpent 357 here Iâll give you this list. đ
Mod list
2007 Mini Cooper S
K&N typhoon cold air intake
JCW turbo
Kompack dual port bov
3 inch downpipe
CNT mid pipe with resonator
Magnaflow cat back muffler exhaust
eBay intercooler (bad idea)
HFS3 Aquamist water meth injection (best idea)
BC racing coilovers with Swift Springs
23 mm rear sway bar set to stiffest setting
Hawk HP plus pads
OEM rotors
Hoosier A7 tires (had Federal RSRâs)
Powerflex bushings throughout
Quaife LSD
OS Gliken Touring flywheel and clutch
Manic stage 3 tune
GoNMF oil additive
New for 2018 big wing and carbon fiber sunroof replacement.
This was done spread out over a year
Instagram @jetsmini
CZcams Www.czcams.com/users/jetsr6
Ran 2017 SCCA SMF class. Three 1st places. One 3rd place.
In 2017 Central Pennsylvania Region Ten 1st places out of ten in the novice group based on PAX times.
2018 sponsors
GoNMF
Motorsports Ammo
Jeremiah Thomas I have a Mini R56 JCW AEM ram intake, intercooler muffler delete (pointless muffler), Milltek Sports cat. Saving for an intercooler then a remap.
Any advice/reccomendations on anything else along the way?
I do want a recirculation valve rather than atmospheric dump valve. Im going to research yours now and a few other of your mods. Thankyou and car sounds and looks beautiful on acceleration.
Thanks just got my 2011 jcw and love it can't wait to mod it. Going for 500 hp
Hey where did you mount the nozzle?
@@jetsmini why was the Ebay intercooler a mistake? I've read alot and people say it's a benefit from stock.
Hey where did you get your boost gauge pod?
Itâs a Alta gauge pod. Probably got it off eBay
What DV dou you use ? Forge ?
OÄulcan CoĆkun Turbosmart Kompack dual port, been working great for a year now!!!
What app are you using ?
fede rockin DashCmd for iPhone or dash command for android with ELM obd2 adapter
what does stage 3 settings look like? Im stage 2 at the moment looking to go to stage 3.
Troy Guerrero Stage 3 is basically a bigger turbo with what you already have.
Jeremiah Thomas So if I add Garrett turbo I would get to 293hp? The only other thing I don't have is new exhaust which I plan on getting very soon.
Jeremiah Thomas I have stock internals.
Troy Guerrero thatâs a good possibility for that much hpâs. May need a stage 3 map to get that turbo to work correct. Manic doesnât offer stage 3 anymore. You would have to go with RPM. By the way 10k later itâs still running like a champ.
You have any photos or how to on the water meth kit
Here's the site that I used www.northamericanmotoring.com/forums/drivetrain-cooper-s/268431-aquamist-hfs-methanol-injection-systems-5.html
Thanks.. Here's my build, allot more has been added since we've air this.. working on a ch for the build czcams.com/video/5N96K3tO5Yg/video.html
Thats one nice Mini!!!!
Thanks, it's in storage for the winter, stock pilling parts now
What do you use in order to see your trip stats? I would want to have something that tells me the hp and the boost Iâm hitting
What is your hp ?
Then I made 244whp
Iâm now up to about 260 WHP with a fully forged engine.
See this Mini autocrossing and wining czcams.com/video/T2bTOQpgH2A/video.html
Slow for a stage 3
Fastest mini around