I got the skil one from Menards it's so handy I'm a maintenance man for rental properties for a local real estate company and this thing is so handy taking outlet covers off or get into cabinet hinges doors and appliances.
if it doesnt have variable speed then its trash , nocry, dewalt, i think bosch makes one, thats about it, the rest are single speed triggers sometimes with torque adjust
100% I threw my dewalt out an went with the Dremmel one. Also the dewalt the stupid gyro crap began to give out. Pretty soon after buying it. An that one was bigger than I would have liked. This one was a lot to big. The Dremmel had the torque adjustment. Also worked by pushing the bit into the screw to activate an or by button. But more importantly it’s small an didn’t take up a ton of room an fit the tool bag well. Dewalt tool ended up being shitty. An 90% of everything batter I have is Milwaukee so rathered that. But with the size of that thing. They could keep that shit. That size may as well just have a compact full size an tote around
Mine stopped working after a few jobs with about 30 minutes of real solid use. And anything vertical it didn’t seem to want to activate good with. Threw it to the trash an got the dremmel. And the size fits way better in the tool Bag also
Use it a ton? Looks like it's brand new and has maybe been used a handful of times. I am sure it may have it's uses. But honestly seems like a waste of money to me.
Im a HUGE Milwaukee fan but this electric screwdriver is complete ass!! I bought one and had to return it twice because it can’t handle hard work …finally just ended up getting my refund and went with the Dewalt which is superior and top tier in that field ..
I was thinking of getting this because I work on some PEV boards. The thing is a lot of the screws take the t20 to t40 bits and I'm curious of any sets would fit onto this screwdriver
I am a pro and a Bosch guy, but I swear by this screwdriver. Anyone who says otherwise is a blinkered fanboy, or a DIY homeowner who I would not trust to put air in my tires.
Far from. I may of used mine on 8-10 jobs an put a real solid 30 minutes of use on it. An the gyro started kicking the bucket to the point of non useable. Than the gyro sucked when it was things that were vertical.
What's the differences between using this and just a regular Milwaukee drill with a long shaft extension on a low toqr setting or anything that's not on hammer mode? what a silly tool? it's esentially just a DRILL
I hate Milwaukee little bit because of that do you see Newton number two when you put one back is supposed to be number one 2 and how hard you going to screw inside
It’s a great little tool. Can’t complain. Got this as a gift.
They need to make it M12
Use these at work. Don't let them fold while your using it or it's gonna pinch the hell out of you
True I prefer the m12 screwdrivers way more.
Walmart hyper tough has 4 and 8 volt. Regular drill gets tiring and Regular screwdriver too. This works great for lots of projects.
Use one everyday set torque for electric panels and covers
How is this more expensive than the M12 Surge Driver lol
I far prefer the design and ease of use of the m12 electric screwdriver
It’s bulky that’s the problem..might as well use an impact..smaller electric screwdrivers like the skil one is the better one
I got the skil one from Menards it's so handy I'm a maintenance man for rental properties for a local real estate company and this thing is so handy taking outlet covers off or get into cabinet hinges doors and appliances.
if it doesnt have variable speed then its trash , nocry, dewalt, i think bosch makes one, thats about it, the rest are single speed triggers sometimes with torque adjust
100% I threw my dewalt out an went with the Dremmel one. Also the dewalt the stupid gyro crap began to give out. Pretty soon after buying it. An that one was bigger than I would have liked. This one was a lot to big.
The Dremmel had the torque adjustment. Also worked by pushing the bit into the screw to activate an or by button.
But more importantly it’s small an didn’t take up a ton of room an fit the tool bag well.
Dewalt tool ended up being shitty. An 90% of everything batter I have is Milwaukee so rathered that. But with the size of that thing. They could keep that shit. That size may as well just have a compact full size an tote around
Just use the m12 impact.... i've used the m12 driver( non impact) on undertrays and many more for 6yrs, until my wrist started hurting
Sometimes you don’t need the torque and power of an impact wrench
Maybe work your wrist and grip out more. Never had a issue with a driver hurting my wrist, especially a 12 volt.
@@Mm56677 you don't work above your head, do you?
@@user-jh1mq2ih2utrigger control!
Makita makes a similar style driver but it’s an impact. Use it everyday and love it. Makita TD022D
All these company’s make an impact driver lol
From reviews it looks like the Dewalt gyro one beats it… can anyone confirm or deny?
Mine stopped working after a few jobs with about 30 minutes of real solid use. And anything vertical it didn’t seem to want to activate good with.
Threw it to the trash an got the dremmel. And the size fits way better in the tool
Bag also
I prefer a button as in some tight spaces I haven’t had the room too or had to readjust my grip so I could rotate my wrist.
For $170 bucks I’ll pass 😂
Snap On will cost you $400- without a battery and charger
Amazon's Denali gets the job done for $23
@@ericumlauf9734 yeah but snap on delivery truck you get bonus make out with driver in van. No joke lol I've seen it happen
Like it !
What's the torque spec rating in pistol manual mode. Can I torque that handle to a billion or is it a flexxy boi
I have this tool for a year now and it’s durable af. I basically use it as a socket handle with a socket head.
Use it a ton? Looks like it's brand new and has maybe been used a handful of times. I am sure it may have it's uses. But honestly seems like a waste of money to me.
I like mine.
What size was that mini shackle bro ?
Im a HUGE Milwaukee fan but this electric screwdriver is complete ass!! I bought one and had to return it twice because it can’t handle hard work …finally just ended up getting my refund and went with the Dewalt which is superior and top tier in that field ..
❤❤
Its clunky, a regular screwdriver works best. Better yet, just use an m12 impact driver as many probably already stated here.
It’s actually really nice for running stuff up quick big time saver
Size should be smaller for a screw driver
I was thinking of getting this because I work on some PEV boards. The thing is a lot of the screws take the t20 to t40 bits and I'm curious of any sets would fit onto this screwdriver
Clutch
I have a Ryobi that has a clutch.
I am a pro and a Bosch guy, but I swear by this screwdriver. Anyone who says otherwise is a blinkered fanboy, or a DIY homeowner who I would not trust to put air in my tires.
Save time and money. The DeWalt gyro screwdriver is perfect in every way. One button and you control the speed. No speed 1&2. Try it youll love it.
Far from. I may of used mine on 8-10 jobs an put a real solid 30 minutes of use on it. An the gyro started kicking the bucket to the point of non useable. Than the gyro sucked when it was things that were vertical.
Nice but still spendy.
DeWalt for me, love the gyro and also has a light
M4 that’s adorable
I want the Milwaukee but the Dewalt seems to be the best version at the moment.
I heard they discontinued the DeWalt battery so 🤷 but this one has a clutch with I want but seems to be to big for what I'm looking for
@@thefacelessmannn if you have the battery case, you can likely replace the cells if they ever go bad.
They need to.drop the price already..im going dewalt
Vessel is my favorite
What's the differences between using this and just a regular Milwaukee drill with a long shaft extension on a low toqr setting or anything that's not on hammer mode? what a silly tool? it's esentially just a DRILL
It supposed to be a smaller handy tool. But they made the thing way to big to be that
How much is this $200? 🤦🏽♂️
Yup but super handy
I just got one for 115$ new on eBay
@@zan1073 support your local thieves 😂
just buy 5 nocry ones that are better for that price
@@HammerdownMotorsportsUSAShow us using it as a drill hook us up compa!😊
I hate Milwaukee little bit because of that do you see Newton number two when you put one back is supposed to be number one 2 and how hard you going to screw inside
I bought the Japanese Vessel for 40 bucks.
And?
How do you like so far?
I'm sorry but those buttons are hurendus
That’s crazy for the first time ever I can say dewalts is better