The Legendary Stihl 036 Vintage Chainsaw

Sdílet
Vložit
  • čas přidán 6. 08. 2024
  • Let's take a look at the Legendary Stihl 036 Vintage Chainsaw that I had the opportunity to build from the ground up here in the Shop. One of the most popular saws Stihl made, it's Rugged and reliable design is Hard to argue with. My buddy Visser was looking for quite a while for one, so when this basket case popped up on Craigslist for 50 bucks, or was it Facebook 🤔 we snapped it up!
    #vintagechainsaw #oldchainsaw #kainkustomgarage
  • Zábava

Komentáře • 36

  • @KentuckyFriedFixes
    @KentuckyFriedFixes Před 8 měsíci +5

    026 and 036 are great saws. Everybody should have one of each for their collection! I love the old Homelites but if I was getting back into the firewood cutting I'd use a Stihl for sure.

    • @KainKustomGarage
      @KainKustomGarage  Před 8 měsíci +1

      I'm not partial, as long as they run good and look good doin it!😉

  • @brianking1138
    @brianking1138 Před 8 měsíci +5

    That dog will hunt! I like how we refer to a 30 year old saw as a newer one 😂

    • @KainKustomGarage
      @KainKustomGarage  Před 8 měsíci +2

      I know right, I always forget how old they are, sort of timeless in a way😉

  • @andrewscott2866
    @andrewscott2866 Před 8 měsíci +2

    Awesome!!! Playing with the new saws now😁👍👍👊

  • @robertshoemaker6204
    @robertshoemaker6204 Před 8 měsíci +2

    Great job! Hard to beat the old 034/036 style of saw...have a great day. Shoe

  • @aaronneher4860
    @aaronneher4860 Před 8 měsíci +2

    I’ve got an 026 and a 034 converted to an 036. Kind of an interesting saw. Splines on the 026 and the 036 are same size so easy to swap parts over. Mine doesn’t have a compression release but it has an adjustable oiler. Slapped a 25” ES light bar on it and it is just a dream for bucking up medium firewood. Mine seems to really rev out hard and seems a little high strung but is just a fantastic firewood saw.

    • @KainKustomGarage
      @KainKustomGarage  Před 8 měsíci +2

      That's Awesome man, yeah I'm pretty impressed with this 036!😊

  • @CraigArndt
    @CraigArndt Před 4 měsíci +1

    Hey Dan, those aftermarket mufflers for the 036, looks similar to the one I got off Amazon, they have double the size hole in the muffler than stock and a very unrestrictive spark arrestor. I just restored 2 036 Pro's I got free, one I gave to my son for Christmas. Just finished mine and video'd it. It gave me some trouble, but got it figured out. I love these saws. Great video, love your channel.

  • @EightWheelsRollin
    @EightWheelsRollin Před 8 měsíci +1

    Yes Sir! Nice saw...on my short list!

  • @takeashawnoutdoors5518
    @takeashawnoutdoors5518 Před 8 měsíci +2

    I have the old brother. In the form of a 034 super. Great saws.

  • @homopit42
    @homopit42 Před 8 měsíci +1

    Nicely done! Looks presentable and cuts very well. I had only problems fixing the 036 for my friend. Barr stud was stripped out of the case and several other problems with rubber intake and impulse and fuel lines. I used thread insert to fix the hole for the bar stud and it holds very well now. I also used some epoxy to be on the sure side, but I think I didn't need to.
    What I'm still missing is that cover that goes around the clutch and over the brake mechanism. Had no luck on finding that part.

    • @KainKustomGarage
      @KainKustomGarage  Před 8 měsíci

      Awesome Brother! Yeah some parts are hard to find for sure...keep lookin!😊

  • @davidcarberry3547
    @davidcarberry3547 Před 8 měsíci +1

    nice saw have a 38 can burry the 24 inch bar and it likes it, you did a good job on that when the rings seet it will richin up and whan you retune will run even better

  • @CScav243
    @CScav243 Před 3 měsíci +1

    I have the 026 and 036 Pro, Bought in the 90's but only for home use. they both run great. Put a Carb on the 026 years ago when I was stupid and let it sit too long with this trash gas they have. Wish I knew the best way to change the main fuel line on the 036. Seems like you need to disassemble the entire machine. Any tips would be appreciated. Thanks for a nice video.

    • @KainKustomGarage
      @KainKustomGarage  Před 3 měsíci +1

      Thanks man, yeah I believe you can get to it after removing the carb and the plastic housing behind it if I remember correctly🤔 good luck Brother

  • @jeffreyrubish347
    @jeffreyrubish347 Před 8 měsíci +1

    It's a runner!

  • @francescorizza7237
    @francescorizza7237 Před 3 měsíci +1

    Hi, can you tell me where I could buy the toothed harpoon for the 036 online

  • @thomasfrost6993
    @thomasfrost6993 Před 3 dny

    What do you do to clean carbon buildup on the saw where the exhaust exits?

    • @KainKustomGarage
      @KainKustomGarage  Před 2 dny

      Usually just scrape it out carefully, making sure piston is covering exhaust port😁

  • @user-vl9me7oj8k
    @user-vl9me7oj8k Před 8 měsíci +1

    hey kain i was wondering if you would be able to do a video on getting the poulan 306sa running thanks dean

  • @stevestock2439
    @stevestock2439 Před 6 měsíci +1

    I'd love to have that saw, it gets with the program, sounds killer. Well done. For sale??

  • @usmcwasson4076
    @usmcwasson4076 Před 16 dny

    Did I over pay? $200