NEW NEJE 3 MAX A40640 Dual Laser Beams with Optical Power 10W and Big Engraver Area 810x460 mm
Vložit
- čas přidán 11. 09. 2024
- NEW NEJE 3 MAX A40640 Dual Laser Beams with Optical Power 10W and Big Engraver Area 810x460 mm
You can buy these items here:
Neje.shop:
NEJE 3 MAX A40640 LASER EENGRAVER: shrsl.com/3m81v
Aliexpress:
NEJE 3 MAX A40640 LASER EENGRAVER: s.click.aliexp...
Amazon:
amzn.to/3wGuTjW
Cloudray 60W Air Compressor: bit.ly/3hCGQ1Z
Laser Engraver Pad :bit.ly/3n3nHbi
firmware-wiki: neje.wiki/doku...
If you like my work, you could support me:
www.buymeacoff...
paypal.me/kuko...
Neje 40W A40640 air assist nozzle 3d print stl
www.thingivers...
www.thingivers...
neje.shop/
Have you tried adjusting the focus between passes? If you have 4mm ply, create a differ block for 17mm or so to focus the laser them go the first pass. Then use a15mm spacer block so the focus is how 1/2 way into the woods and run the cut again
Thanks for your video, you rock.
Just ordered mine so excited I was going to go with xtool then I seen this baby here
hola. yo tengo el 3 max 40E... iniciandome en cortes.... ya tienes el tuyo? como te ha ido?
Hey mate, im sorry to bother theres a part i dont understand, the air assist so i NEED to 3dprint the little hook the screw on the hose at the laser end? did you supply the little steel straw that comes right next to the laser hook or was it part of the kit and so you just printed the little hook that it screws into? sorry im not very good with these things really want to make sure i have everything for the air assist when the unit arrives
вытяжку бы еще придумать туда ...аще огонь ))) если ее внедрять как домашнюю
Hi Sir, I'm using Neje 3 Max Laser Machine,
My question is:
Why is Y axis [Landscape] Burning sharper than X axis (Transverse).
I hope you can enlighten me.
Thank you, teacher...🙏
Second question: I don't need such a large work surface. As big as an a4 paper sheet is good for me. Is there any smaller model with the same laser as this?
pro machine would be good to u.400*410mm👉neje.shop/collections/all-products/products/neje-3-pro
I put one onto a cheap 3018 cnc, work great.
Can a roller be used with this laser engraver? if so which model of roller can be used to engrave on bottles and rounded objects?
Hola. Yo tengo ese modulo. No he podido cortar un mdf de 6mm. Empecé con una velocidad de 300mm/m, en la segunda pasada, baje a 200 y por ultimo a 100, en total 3 pasadas pero no cortó nada. Después hice otra prueba con 10 pasadas a 300mm/m, solo cortó algunas partes, y tuve que desperdiciar un mdf de 50X30cm ya que no funcionó. Aclaro que la potencia del laser está al 100%. Inlcuso después de varias pasadas, bajé mi laser 2mm pero tampoco funcionó. Qué consejo me puedes dar?
hola. ayer pude instalar mi neje max e40... leyendo tu comentario... pudiste resolver el problema?
Any plans to offer a rotary attachment? Can it be controlled with Lightburn? Can a dxf file be imported into the current software? Thanks...
Thanks for the vid, just bought one and this is better than the instructions. NEJE doesn't provide any information on the air compressor to use with this, what air compressor are you using in your set up?
I use Cloudray 60W Air Compressor 70L/min-0,03Mpa : bit.ly/3hCGQ1Z
Hey ! I need your Help ! 🙂
It seems that you are a very professional laser guy. So you are my First choice. 🙂
With the Origin Software of neje, i have a lot more power than with lightburn. You cut 4mm plywood with 400 mm/ min and i can do it only with 250. The two values are set to 1000. Do you have any Idea ?
Thanks !
Hey
I have the same problem
Did you solve it?
This blue rubber mat. Where did you find this? Otherwise awesome video!!
hola. claramente se ve que la alfombrilla es una lamina con chinches metalicos al reves... me parecio ingeniosa la idea...
Which screws do you use to fix the air pump? They seem to be missing at my delivery
Do you mean air assist or air valve?
The air assistant has a screw in the package and
placing the air valve on the laser frame was just my idea, just needed to drill one hole and buy the screws.
@@kukomio Is the assisted air system included in the NEJE package? Or did you buy it separately? Thank you
What kind of air compressor are you using and how many bars?
I use Cloudray 60W Air Compressor 70L/min-0,03Mpa : bit.ly/3hCGQ1Z
Prisim ta aké presne nastavenia používaš na gravírovanie foto na preglejku , máš tam 5000/80 ale aké máš ďalšie nastavenia ďakujem
I plan to buy one if these with a simple mission: engrave my company name in the back lid of chromebooks, which are made of brushed aluminum. Do you think this would work?