Bosch GBH 5-40 DE repaire
Vložit
- čas přidán 26. 08. 2024
- change lever is broken and the piston and striker o rings need replacing. Hammer us good otherwise, may have been laying up some time.
#toolrepair #repairs #powertool #tools #bosch #boschhammer #gbh540de #hammer #kango #tear #construction #building #demolition
Great video
Have the same model and a stopping device cracked. Ordered a new one and watched your vid on how to dis/re assemble…worked a treat and saved me a fortune at a repair joint
Cheers lad
Dean, thank you for the video. Had to replace some o-rings on mine and this was really helpful as of giving me the idea, how much work this will be and seeing that one does not need any special tools for the dis- / reassembly. So the second live of my GBH 5-40 DE has just started 🙂
Glad it helped
Hiya Dean get yourself a Victorinox Classic SD it's the smallest of the Swiss army knives ideal as keychain knife.
The tweezers are brilliant on them.
Love the videos keep em coming man.
Dean I use a sharpish knife, and drag it sideways across your skin. (Plainly not a cutting stroke) just rest the blade length vertically against the skin with one hand and scape it across the splinter. try and note which way the splinter is going in and drag the opposite way ie not pushing it in. The sharp blade edge catches the splinter and pulls it out. It works surprisingly well. The blade shouldn’t be so sharp that it cuts your skin when pressed against it, rather like most of my veg knives in my cutlery drawer!
You are very very good
Thank you so much for the video, it is really useful.
Im glad to hear it. thanks
Thanks!
Thank you for that.
I have a bosch 11240 rotary hammer drill that rotating but not hammering. Where would you recommend getting a service kit for it? Thanks, love the videos 👍
Esse vídeo salvou minha vida bendita hora que vi
Don't know about knipex tweezers, but a nice sharp unused pair of electronic super knips sidecutters will usually grab those buggers, IF you can see them that is.
I expect you will repair that poor transformer next ;-)
Респект и уважуха🔥!!! 👍🤝✊
Dean,
You do a great job at fixing the tools - no question about that. But I must say, you’ll absolutely ruin that yellow transformer inside the door if you don’t stop that carry on.
Any chance of a workshop tour video?
Also, are you self-taught or do the manufacturers give classes in how to diagnose & repair?
I actually already have a degree in mechanical engineering. So was able to pick this up pretty easily.
I do believer some brand do run training courses.
I was at the makita center in Glasgow once for brushless motors and 4 stroke engine update. But I was able to teach them more than they could teach me.
@@deandohertygreaser ah… that explains it. I’ve the same degree but I’m the kind that ends up with a jar of
Leftover screws and washers :-)
That tip about self-tappers into plastic was a terrific one.
Boa noite esse martelete é original ou réplica similar?
Good👍
hello goodnight
Is this hammer original or similar replica?
Great video.
I’m just thinking, I have the Hitachi DH40MC SDS Max Hammer Drill and boy it gets some stick and it’s never missed a beat.
Do you think them Bosch machines are a bad design, as you’ve done a load of them now.
Cheers
No bosch make some of the best hammers. We sell mainly bosch hammer in the shop and I am the service agent for bosch and makita, so going to get a lot in. I regularly service bosch hammers and tools that are 20 years old and used every day.
I’ve only had a couple of Bosch machines in the shop before and there still going strong, but mainly get dewalt 18v and hitachi 240v stuff. I own a engineering workshop over in the Scottish Borders and the lads hammer the hitachi grinders and they just keep going 😂
Really enjoy your channel Dean. Keep it going 👍🏻👍🏻
What grease you use for this drill?
It is a Bosch grease.....but i found that Divinol make that grease for them and I use Divinol Lithogrease 1500, NLGI 1 class, no problem so far
@@deut3rius Thank you very much, I will fond it to buy because bosch grease price is high
Профессионально
Не поспоришь
Dean, Would a STRONG Neodymium Magnet be any good to remove those little metal shards?
it would only take out the large pieces, the fine bits with stil be suspended in the grease, and wear out the o rings and seals
Hi, what grease you use?
I watch your short clips and I don’t see many Metabo. Is this because they are unusually reliable or because you don’t repair that brand?
I repair all brands. But metabo would not be that populare here. And are slow to get parts for.b
But metabo are quite good in general. We would supply metabo table saws and planer thicknessers.
Lebih bertenaga dg grease, lebih dingin
Fine point tweezers for the win to get the little metal splinters out your skin
Don’t turn that knob while she’s running, boys and girls.
Please, medidas juntas tóricas (rings)? Thanks...