How to mount and balance Beastgrip rigs with gimbals - COMPLETE Guide for smartphone filmmakers.
Vložit
- čas přidán 7. 09. 2024
- 👉 Welcome to our latest video where we dive into the world of smartphone filmmaking using the Beastgrip and Beastcage! In this video, we showcase how these versatile products are fully compatible with large-size gimbals such as the DJI Ronin RS3 Pro, Zhiyun Crane 2S, Zhiyun Weebill 3, Zhiyun Crane 4, and Moza AirCross 2.
👉 With the Beastgrip and Beastcage, you can easily mount your smartphone on these gimbals, ensuring compatibility and a seamless shooting experience.
👉 Don't forget to like, comment, and subscribe for more tips and tricks on smartphone filmmaking, iPhone videography, and how to get the best out of your Beastgrip and Beastcage gear!
Official Website: beastgrip.com
Facebook: / beastgrip
Instagram: / beastgrip
Twitter: / beastgrip
#beastgrip #cinematic #beastgripnation
I’m now using the DJI RS 3 Mini with an iPhone 15 Pro Max Beastcage, the phone and the 58mm filter mount with up to two filters. That’s all I need the gimbal to carry. There are several CZcams videos on balancing (I liked Otto Julian’s), and the DJI Ronin app balance test says that my balance is “Excellent”. There are discussions about my setup, a photo of the setup, and a screen capture of the balance test results on the Blackmagic Forum and in the Facebook Group iPhone Cinematography.
The RS 4 Mini not having been released yet, the RS 3 Mini currently costs a discounted US$269. I paid B&H $220 for one in “as new” condition. Beastgrip’s recommended RS 3 Pro, now superseded by the RS 4 Pro, is far heavier and sells for $869. If you want a middle ground, the RS 4 is $549. The RS 4 might or might not be necessary for a Beastgrip Pro, or if you start adding accessories to the payload such as external storage, a mic, a light, etc. Add enough stuff and no doubt you can get to the point of needing an RS 4 Pro :)
Thanks for sharing your experience and insights! It's great to hear that you're achieving excellent balance with the DJI RS 3 Mini and the iPhone 15 Pro Max Beastcage. Your detailed setup and results are valuable for the community.
Happy filming!
Yes pls do more videos with the full setups and with those MK2 lenses.
thank you for tour feedback!
Love the thumbnail ❤
Thank you so much!
Right time, right moment for me. Thanks a lot 👌🏻
you are welcome!
Thanks for this video. What's the reason that you list the DJI RS3 Pro but not the standard or Mini?
Second this ☝️ I emailed support and they recommend a DJI Ronin-SC - Camera Stabilizer, 3-Axis Handheld Gimbal for DSLR and Mirrorless Cameras
I'm having a hard time setting up. Please help!!
DJI Ronin-SC or DJI Mini are too small gimbals and they might need additional counterweights to balance it properly.
@@beastgripTV I’m already using the DJI RS 3 Mini with a Beastcage, iPhone 15 Pro Max and filters. No counterweight needed. The Ronin app, after a balance test, says balance is “Excellent”. The current RS 4 Pro, successor to the RS 3 Pro that you recommend, is much heavier and costs an additional US$600. I’ve elaborated on the Mini in another post here.
@@beastgripTV Please Help! I’m using the RS3 but the plate is too long and when I’m in wide angle you can see the plate. I noticed your set up is much closer to the end of the plate are you using an after market part to achieve this???
I would love to see some stuff with the Beastcage/iPhone and Gimbals on Steadicam's Steadimate RS
Great. Now I know how which gimbal to buy
😊
1:43 @beastgripTV what plates are you using here to attach the rig to the gimbal?
Can I use the DJI Ronin SC with your cages?
Will it work on a DJI RS4?
Works well with the DJI RS3 Mini with VND filter on all the large lenses.
Can you elaborate on how you got this balanced correctly? I just got the rs3 mini and I can’t get it balanced correctly
@@ianjohnson1009 Make sure the lens is upside down, like you see in the video but on the RS3 mini, the base plate should be attached on the left side. The video shows the plate attached on the right side but it would not work for the RS3 mini, just attach it on the left side. Then just go ahead and adjust each of the 3 axis to perfect balance and run the calibration. Believe me it works. Just keep trying. Once you get it, the next time it will be very easy. You can even add filters ( I used a VND on anamorphic 1.33 and 1.55, 1.7 tele and .75 wide and they all balanced fine on the RS3 Mini.
Glad to hear you were able to make it work!
Thanks so much
You're welcome!
Is it possible to produce 9:16 clips in a Beastgrip rig setup with a gimbal?
Thnx!
you are welcome!
Two questions, can you do a video showing vertical mounting w/ the .75 lens? & what is the mounting part shown next to the lens at 2:14? Thanks, great products!!
it's SSD holder
What about the Weebill S gimbal?
it might be too small
Would the zhiyun cinepeer work?
yes it will work, as it is the same model as Weebill 3
A more detailed version would be helpful with all the accessories/gimble rig
thanks will do that!
It's a bit of a struggle on Weebill 3 gimbal, I contacted Zhiyun support and they claim they haven't tested it with phone cages and it is only meant for cameras.
Does the beastcage need counter weight for better balancing on weebill 3?
We have successfully balanced the Beastcage on Weebill 3 in this video.
Have you had a chance to watch the full video? It provides step-by-step instructions on how to balance the Beastcage with the Weebill 3 without the need for counterweights. If you still encounter issues, please let us know, and we’ll be happy to assist you further.
@@beastgripTV Weebill no longer ships with the tiny adapter for the phone you showcase in this video. They have switched to a tiny quick release system which doesn't work with phone cages. I had to order an adapter from Amazon to make it work. May be you should account for that....
no brainers on the video's