Video není dostupné.
Omlouváme se.
KTM EXC 300 TPI LONG-TERM REVIEW AFTER 100 HOURS IN EXTREME ENDURO
Vložit
- čas přidán 3. 11. 2022
- KTM EXC300 TPI 2023 performed very well in first 100 hours, will it last up to 200 hours? This is KTM EXC 300 TPI LONG-TERM REVIEW. We will see that ! If you are interested in anything else about this KTM TPI, you can ask me in the comments. The other new KTM EXC300 TPI is not mine, its from a good friend of mine.
MERCH STORE: teespring.com/...
If you want to support the channel, you can do so by visiting our merch shop.
Join this channel to get access to perks:
/ @thedirtbikerider
Social Media:
Instagram: / thedirtbikeriderofficial
Facebook : / thedirtbikerider
Business contact : the_dirtbike_rider@hotmail.com
Yes I definitely want to see you fix the exhaust pipe with water pressure.
Im waiting for the easy clutch tip :D
Hi my have about 50 mth, and I spot oil leak from valves covers, the bike was not used for about 6 months is this normal in this bikes I have changed my exc 350 to this bike and I just confused if this is normal at this amount of mth?
Have the same pegs and just replaced them at 220hrs with some more, they really only need some new bushes. Have the same seat cover, it's also more water proof than the standard one. Been thinking of making a jig like that for my pipe so i can pull the front back into place.
Which ones are they? Thanks
So mine are only halfway there, at least 100 hours are waiting for them.
Blow air in the pipe 60 psi and heat witha torch and all the bend Will desapire
I'm afraid of the air, can it explode ?
@The Dirtbike Rider there's a kit to seal both ends includes a Schrader valve and pressure guage to fill and monitor.
czcams.com/video/9DKLV5f35lc/video.html
@@TheDirtbikeRider 60psi before heat is way too much
Cannot get my 2018 husqvarna tpi started. It's been sat for 6 months
Are you worried about the oil pump quitting I like the idea of not mixing but oils pump quitting scares me
Thank you for the valuable information!
How many times did you change the piston?
Best regards
I haven't changed the piston yet, I usually change it around 150 hours. But control is important, looking at the piston through the exhaust to see condition, and compression test. A good air filter is important for a long life of the piston and, of course, that the engine does not overheat.
hi, I have the same bike as you and I'm undecided whether to put a carbon guard on the muffler given how yours has shrunk. What do you recommend? What do you think about the plastic crankcase protectors?Thanks
I have water pump for fixing exhaust so i dont use any protection, otherwise protection for engine like skid plate and tps sensor guard is very good to have. However, I believe that a skid plate and TPS sensor guard would be extremely useful, especially if you intend to ride the bike in rough or rugged terrain. These types of protection can help prevent damage to the engine and other vulnerable parts of the bike, saving you money and time in the long run. Overall, I believe that investing in protective gear and accessories for your dirtbike is always a good idea, as they can help keep it in good working order and extend its lifespan.
They changed the springs in the new models, the 2020 stock spring is softer than the stock in 2022.
I agree, I think that now 4.4 is coming, while before it was 4.0
So overall ,
is KTM a more suitable bike for you , than th Beta ? ?
Yea I want to see how to fix exhaust pipe
i will do it soon
i wanto to ask you. why did you change the beta? I think you said that the best harD Enduro BIke ever.
Beta has the best engine for extreme enduro but ktm also has some things.
is this the same bike that blew the piston ?
Check out Shinko F546 front tire. Same pattern. Much cheaper.
Unfortunately, where I live, we don't have that tire model
I don't see the frame covered in oil from the tank. I'm guessing you don't fill yours to the brim and then complain about the "poorly designed" cap?
I pour the oil to about 70-80% of the height of the oil tank, so that I can always see the oil and level. As for the oil cap , it is poorly designed, because a lot of dust gets in and sticks to the oil. It is good to have a little sponge around the cap, this prevents the entry of dust. Of course, it's important to wash the dirtbike properly, keep the cap clean, and don't pour oil on top, and everything will be fine.
Gdje nabavis dijelove za njega, narucujes izvana sve ili?
Is the Sherco in the same league as the Ktm far as performance? I’m not interested in resale as I keep bikes a long time.
for me Sherco is better in lower RPM, maybe because still use a carbuerator.
sherco is bottom power king, its bike made for extreme enduro. But problem is bad clutch plates in my experience
Did you retune for the head?
Me watching this knowing the one i just bought will be built to a supermoto and ran on the street only. :O
Nice video
What mod have you made to idle screw ?
Nothing, I just used the tool and adjusted the idle from bottom. I picked up RPM and then lowered RPM on screw from the side.
I don't call 100 hrs long term that is 2 top ends maybe.
anyway, it's not too little. still its it was used hard way
Pola covjek pola so jaa
Best youtuber