A Shock(ing) Update On Griz!!
Vložit
- čas přidán 17. 12. 2023
- Making good progress on the Wrecker as we tackle the bump stops, shock towers, manifolds and more. Love seeing this beast coming together!!
Support the team, get our merchandise at:
chadsfab.com/
Watch Griz's transformation from the beginning...
• Griz The Off-Road Wrecker
We think you'll also love these videos:
• Chad's Impulse Buy AND...
• Gonzo's Ride Gets Impr...
• Revving Up To The Tran...
• This Is Where It Start...
Contact us at:
chadsfab@gmail.com
Chad's Fab
PO Box 875
American Fork, Utah 84003 - Auta a dopravní prostředky
No Chad. Why you all have to leave? Feel free to give us more of the 2 hour ones. We love you and the family. The joy and jokes are always coming.
Chad…you are a wealth of knowledge. Your ingenuity and skills never cease to amaze me.
such a joy to watch the channel everyone acts normal no show just do what has to be done thanks for being who yall are
Sounds like a supercharger is gonna land on top of that engine. Nice work guys.
Grizz is coming along quite nicely, Good Job Everyone
4:39 you guys should know by now, that there's no such thing as a problem; only opportunities to shine! 😉👍
"Shock(ing)" I see what they did there. Gotta love a good Dad Joke, even when it's bad.
They're all bad 🤣😂
Chad, your willingness to go the extra two miles to get what you want is impressive.
Love the PSA at the end. Always look for things to be grateful for. Awesome! Love it!
Love the patience ,good job gentlemen
Your explanation of why and how your Fabrication skills will work out for the application
Very impressive at all of the work you and the Team are doing Great Content and Video
Thanx for sharing your experience and thoughts
Have a Great Day 👍
God Bless You and your Family and Team
Thank you very much!
It's truly awesome to see all the love between so many friends. I know for sure this is a very tight knit family that goes above and beyond for each other. Great video....
I live in Montana. Our roads are so bad, we only have two seasons! Winter and Road Construction!
Keep up the good work and shows. I really like them both and also your closing. It makes me stop and think.
Paul
There are some roads out here so bad Chad. You had to take bags of quick patch asphalt with you.🤔😃🤣✋🏽🤷🏽♂️.
Someone who has a lot to be grateful for the man above.
Back in 09. I was pretty close to not being here talking right now will more than close.
I'm alive thanks to someone who isn't here anymore.😞😔.
I had a whole liver transplant.
And I've been eating out hospitals a few times for other things like my daughter says they can't kill me. Thanks God.
You all take care and be safe.
🙏🏽🙏🏽👍🏽🤙🏾✋🏽😊😎🙋🏽♂️.
I think Blackfoot has the worst streets. You guys do good work.
I've had family die from cancer due to benzene poisoning. Please, all of you wear gloves all the time. And make sure the shop is very well ventilated. We all want you guys to be around for many, many years!
Chad the teams did a great job on Griz. I am sure you all will be glad when it's all done.
Even without a blower that cammed Godzilla will put Paul’s blown LS to shame.
I doubt that, but a cammed and blown Godzilla......🤔
Yeah, I think most of us picked up on it’s getting a blower you’re going to rip apart whatever vehicle you’re recovering lol great work LDS brother@@chadsfab
I get the privilege to see most of your videos twice! Our Grands love watching! Thanks for making videos we can all watch and enjoy.
🙏❤️😎🤙🛻💨
You and Merlin are the techno wizards.
As for road conditions,
We have the most perfect as long as you love big potholes.
We also have some of the best sloppy road repair.
We don't have to go off-roading we just drive all over all the bumps in the road.
But seriously, most of them are really bad roads.
Chad's Fab Family and Crew...Griz is going to be a beast of a capable off-road (and on-road easy-peasy) recovery wrecker. He ought to give the other wreckers one hell of a run in the Off-Road Games! Cool. Go, go, go...you're closing in on 100,000 Subs! ;)
The streets around here are 110% exactly the same as being on a potholed, washboarded old back woods, dirt, logging road but different!! 😂
Chad's precise fab.
Great show guy's. The roads in New Mexico are probably the worst. Liberal Governor has sent all the state tax to Ukraine.
This is a really wholesome channel thank you all!!
Beautiful header collector. When I was drag racing many years ago we always were concerned with exhaust flow and head/collector flow. Chad's looks absolutely fantastic. Keep up the build looking forward to more.
I love the way that you all work things out when solving a problem You all discus it and listen to each others ideas .
Stacy your a mean mom your poor boy disco dancing and your ripping him LOL
Chad Stacy its always a pleasure to see the episode just puts a smile on my face
thank you and God bless
Wishing you and your whole family a very safe and joyous Christmas.
MATT sent me here to hope you get finished in time for the March off road games.:)
All the best to everyone in 2024, from FIVE ISLANDS NOVA SCOTIA, CANADA.
I live on a dirt road in GA where the county scrapes twice a year unless the school bus driver complained about it there are spots where it is red GA clay and great video keep up the good work God bless from GA stay safe
Texas roads are horrible!!!! I've even seen people put big flower plants in them to keep people from hitting them to keep from ruining their rims & frontends. UGHHHH!!!! 🤦🏻♂️🤬
LOOKING GOOD!
I know you've been through Tooele before... some of our potholes need a lifeguard.
Love your channel and the quality that you guys put into your builds. With that said I've commented a couple time giving Matt heck for not wearing any eye protection while grinding, cutting and drilling. I have done metal fab work starting in the 60's, I've had cutoff wheels explore, drill bits shatter and send pieces everywhere, I've had a wire off a wire wheel stuck in my left eye lid have worn eye protection ever since. You only have one set of eyes protect them.
That's an amazing work of art ....that exhaust manifold. A master piece, my friend.
Grizz is shaping up to be one of the baddest tow trucks around!
Some mad skills in this family. Fabricators mechanics an paint n body men all in one shop y’all just need a bigger shop .
Hopefully the fan adapter you made doesn't ruin the water pump bearings might be out of balance just fill in the weld while you have it apart then put it back in the lathe.
I live in a city in Mid Michigan with a college there and 1 of our main streets in town had pot holes for 20 plus years just patches upon patches some I swear would swallow a semi truck an always all of you do a fine job on everything you build and work on and here's to HOPING AND WISHING all of your family a HAPPY and MERRY CHRISTMAS
Also Merry Christmas to everyone of you and a Happy New Year!
I've enjoyed this video the whole gang seems to be showing a little bit more personality instead of being serious about making a video how much more enjoyable to watch
If ya want to test your rims, come to Michigan, the potholes are known for removing fillings & setting off air bags!! Lol.
Nice work, btw. Certainly appreciate all the chuckles! Thanx !
Great comradery between you all.
You all are the best! Merry Christmas! 🎄
Thank you!!
Merry Christmas!
I'm in the San Francisco Bay Area... our roads are okay. They damn well should be, considering all the taxes we pay!
It's the other drivers who are the problem. Way too many of them! There are two speeds: 10 mph over the posted speed limit when traffic allows (one car length between vehicles) or creeping along so slow the speedometer doesn't reguster in bumper-to-bumper traffic jams.
Ever see a woman putting on eyeshadow using the mirror in the sun visor while she's driving at 70 mph? Or a guy eating cereal from a bowl with a spoon?
It was here that I learned what a nanosecond was... that's the time between when a stop light turns green and the guy behind you honks his horn.
A friend I worked with lived in Santa Cruz and commuted to N. San Jose five days a week for 35 years. That's 10 miles of 6 to 8 lane per side of divided freeway followed by 12 or 15 miles of two lane, twisty, windy mountain roads that the daily commuters drive at 70 mph and are only ever slowed by the occasional freaked out tourist who makes the potentially fatal mistake of driving there during commute hours. He broke the steering wheel of every car he ever owned and had carpal tunnel surgery on both arms, twice!
I thankfully no longer commute and can avoid the peak traffic hours.
The roads are terrible everywhere Chad
Moving right along!
Nice job on the manifolds...🛻🛻🛻🛻🛻
I love starting my week with Chads Fab and you guys inspired me to build my first CAD project…(cardboard aid design) i built complex bend and turn bracket to mount something and i am quite pleased with it! Thanks for the inspiration and brotherhood you share!👍👍😀
What a fun place to "work", great how you all get together. Griz really starting to get into shape now, maybe just a tiny bit over-engineered in places, but I'm loving it.
Love your quips along the way including the wrap up ender! Sometimes the juice isn’t worth the squeeze!
Chad, so what I gathered by watching the video in its entirety.....you're not just another pretty face. 😁 Thanks for bringing us along. You have an awesome crew that truly care about each other. Take care and God bless. John here, from the back-roads of Northeastern Tennessee.
Snow and ice, that's how my roads are. Blizzard conditions keep the drifts deep.
"This city has the best roads by far in the state"... any California city, "hold my beer".
I’m really digging this build. Those manifolds are awesome. Keep up the good work
Thanks a bunch!
Merry Christmas to you all.
Thank you for another great video. Have a very Merry Christmas and a healthy and prosperous New Year.
Great job guys , love watching your show .
All the best from Australia.
10:41 Because It's CAD board.
Anyone else pick up on the subtle reference to Matt from Matt’s off road recovery?
“Unsafe at any speed”
How many remember what that is from??
Always a good informative show. Up here in the state of taxes , NY, many of the roads were cement. When they widened them it always pulls apart on the seam. The rest is just band aids on top of each other.
the roads fall apart and they skimp on the plowing.
THANKS FOR THE VIDEO
Those stock exhaust manifolds are almost like a header after the fabrication, great build.
Thanks 👍
This summer the county rebuilt the road passed our lake community so our roads are excellent!
Longtime Chad's Fab viewer and now new subscriber. Fab Rats jogged my memory to check my subscriptions...
Thanks for subscribing!!
Awesome crew , nice working with your family, awesome work on truck, great job
Another Great Video 👍 Great content, keep up the great work! Perfect way to start a week.
Fun to watch.
Our pot holes have pot holes that's how good our roads are in Tennessee
Nice work. Man those manifolds are tiny. They should flow a lot better with your modifications. Can't wait to hear it run when the "surprise" goes on top
You and me both! 😁
Our roads here in Michigan are so bad our pot holes have pot holes 😂
Our stretch of 24 mile road is horrible. They were last repaved in 1992.
I love this build, Griz is coming along the way it should! Taking the time to do it right makes it nice not to do it twice! You all work well together, great minds think alike! Til next time, see you then. 😊
Dam nice welding on the custom pipes
Looking good
Love the videos family fun time
Just an FYI. On your fan adapter I would have put a slite radius in that corner. So you don't get stress cracking. At that 45. It will probably work. If it fails in the future you know how to make it better. God bless my friend
I was going to do that in the last cut but I forgot to change my carbide.
Chad I just got to say Very nice job on the exhaust manifolds can't wait to hear what they sound like
A lot of good help
Many roads are bad everywhere some just down right dangerous
I would never question your knowledge or quality of work. You all are some of the best in your profession I have seen. You have put an amazing amount of thought into your build. I am wondering, though, if your front tires will hit the front frame rails when the front is aligned. It looks like it has a lot of toe out. Im sure you already know it won't hit, but if it was me and my luck, it would once I had it toed in, lol.
The tires will rub the radius arms but will easily clear the frame rails. I will get the toe set once I build the actual tie rod and drag link.
Great job guys. Thank you 😊. Are you guys entering Griz in the wrecker games?
Closing in on 100k!
The pot holes here are so deep i seen a guy cat fishing in one two days ago
Almost gave me a black eye with the hammer when you made the mark for last bolt 😂
🤣😂
I learn so much from you. I am betting your manifolds will increase horsepower some, close to headers, with the increased volume. Rear suspension looks amazing. Great work. You and all of your crew and family have a Merry Christmas and Happy New Year. God bless...❤❤❤❤❤
We just have horrible roads all over utah!! We live in Price and the roads are terrible, it's sad when the gravel roads are smoother then the main roads! I just installed a long arm on the jku and was the best decision just for the ride on our roads! Lol😊
Great job
You guys are awesome thank you for another great video ❤
Merry Christmas to you and your family! Oh yeah our roads in Oklahoma are awful !!!
😮awesome
Absolutely Awesome!! What a build!
Another awesome one guys, thank you!
More please.
Great progress guys,👍, and thanks for sharing.
Another great video bishop. Merry Christmas to one and all.
our county here in Alberta, can't stop wash board from happing, every grader can't stop wash board from happing on our road
It's good to see such progress made!