Don't go there mate! I have done this like 3 times in a row. I also have a bad habit of reading my 6's as 9's and vice versa. When I'm Woking I switch off but sometimes I can switch off and work without a single mistake, and all of a sudden, I realise I have just built this and have no recollection of it.
I’m new and very much a noob when it comes to wood working but, what’s wrong with using a speed square to cut I’m 2 x 4, isn’t he just trying to cut a clean straight cut? I’m just curious. Much love and God bless
Johnny foreigner at his best....on £35 a day cash in hand......what have we done letting workers from abroad do skilled jobs ? Bet he's on benefits as well with a free house..🤔....yet we have homeless people on the streets , something bad has gone wrong, this needs to stop .
I keep cutting it and it's still too short!🤣
👍😂😂😂😂
That's ok it's only short in one side 😂😅😂😅
He easily could of hit it with a hammer and it would have fitted 😂
Definitely 👍💯
Fitted 💀💀
Or just cut a kerf.
What I was thinking
Lmao half a blade width would have worked fine!
Measure once cut twice.
Definitely 😂😂😂
That’s the way 🤣
We do it right because we do it twice
😂😂😂
Don't go there mate! I have done this like 3 times in a row. I also have a bad habit of reading my 6's as 9's and vice versa. When I'm Woking I switch off but sometimes I can switch off and work without a single mistake, and all of a sudden, I realise I have just built this and have no recollection of it.
It's always 10mm or 100mm too short.
Definitely mate 👍💯
The golden rule measure 2x cut once👍
👍💯
Half laps either end or 45 Deg mitres...don't butt joint it!
My motto is measure once, cut 5 times😅
👍😂😂😂
It was only short one end.
Yes, just one end 😂😂
Measure twice cut once
Definitely 💯
That laughing cracked me up.
👍😂😂
Hello mr George !!! 😂😂😂😂
Кто ты, воин??😂😂😂
😂😂
Measure, cut , swear, repeat. Lol
Couple taps with the hammer and that baby's sittin pretty
👍💯
Ese wey mándelo a Florida a trabajar
If only there was some type of tool that could be used to see exactly how wide that gap is . I think I might try to invent something.
Yes.
Tape measure
A hammer?
That mysterious inch will get you every time 😂
💯👍😂😂
The laugh!! :-D
👍😂😁
😂😂
👍😂😂😂
hammer that in..no worries
First of all I’d never trust a guy that needs a speed square to cut a 2 by 4
I’m new and very much a noob when it comes to wood working but, what’s wrong with using a speed square to cut I’m 2 x 4, isn’t he just trying to cut a clean straight cut? I’m just curious. Much love and God bless
😂😅😂😅😂😅😂😅
👍😂😂
Takes two more seconds to pull the tape out
Measure from one side then the other..spot on everytime 👍
Measure twice, cut a million times & it still doesn't fit!😭
Hello boss how much you give the new guy? $20……… na na na too much.
Boss 😂😂😂😂😂👍
Don't buy that one you see who doing the work.
lol this happens to ALL OF US. It's one of the great mysteries of man lol However, I've never seen that quick square trick before, so that's bad ass
At least he has a decent hammer
Thanks 😀
Hahaha. . Hi Man, pay attention to the way you cut and use the powertool correctly. 😄😄😄
BFH CURES THAT
😂😂😂😂😂
👍😂😂
Measure 3 times cut twice
So true 😅
Definitely 👍 💯😂
lol your tape measure would’ve been basic 101
👍😂😂😂
Nie martw się, deska jest za krótka tylko z jednej strony 😂
Thanks 😂😂😂😂
Use ur rig axe man
Wall plates should be a min length of 3m.
every tradesmen in the whole entire world has done this atleast once 😂😂
Love the safety glasses
Thanks 😂😂😂
what, for cutting wood ?
@@lyndseyb4852 probably yes 😂😂
I hope thats not a wall plate?
This video was made just for fun
What a maroon!
He did it wrong. He was supposed to measure it with a micrometer, mark it with a crayón and cut it with a chainsaw.
Someone else said that
👍😂😂😂🙃😂😂
I know that feeling lol blame it on the tape measure 😂
😆😆😆😂😃😄😅😬
Lmfao
Bro knows only to take 1/8" off (blade) then proceeds to cut 1 3/4" off. Must've been a plumber in the previous life.
That's why they make hammers bro
Hihihihihi @ ist best 😂
👍😂😂
Cut the wrong side of the line, my mate used to mark a cut then pass me it with the instruction; leave the line on, or take it off lol!
👍👍
We call that a tj
👍👍👍
Pull a tape
None of that eye balling and laying out with a sharpie, and lose the square while making a cut. Man o man
lol never heard of kerf? 😂
And a PPE fail
I wasn't referring to what he was cutting but the method always measure twice cut once. Wall plates or not
Oof
Literally everything I've just seen was daft as fck
Gotta use a pencil to mark not sharpie..
Can nobody use fu*** hand tools anymore. 🙄
Cut on the line.
Not on the English building sites by any chance
It’s England 😂😂😂👍
Kinda sad
Not over a window boys
Why not just take a sliver of the part that's already fixed in place...
One cut
Johnny foreigner at his best....on £35 a day cash in hand......what have we done letting workers from abroad do skilled jobs ? Bet he's on benefits as well with a free house..🤔....yet we have homeless people on the streets , something bad has gone wrong, this needs to stop .
Are you serious?
Put some allowance at least .5 cm
👍👍💯
Yes I can
Me too 😀😀
Bah oui un mètre c'est utile
A £180 a day Muppet
😂😂😂£120
Lap joint
👍💯
Cowboy
👍😂😂😂
😂😂😂
👍😂😂😂
Measure twice cut once
Should be like this 💯💯💯
😂😂