Airless Spraying Tips and Tricks | YOUR QUESTIONS ANSWERED!
Vložit
- čas přidán 3. 08. 2024
- Questions about house painting with AIRLESS SPRAYERS answered LIVE with The Idaho Painter & Journeymen John. PART 2
Airless Spraying Accessories:
Tip Saver: t.ly/1MYvl
Cardboard Shield Holder: t.ly/PMeZw
Dual Head Tip Extension: t.ly/LMxRm
Respirator: t.ly/OdH2
Airless Hose Whip: t.ly/23qlG
Music: credit bensound.com/royalty-free-music
Joshua 1:9
Thank you for helping people navigate the different tools and products that help us get professional results! I have a Fuji Q4 Platinum HVLP setup and have done lots of cabinet work with Ben Moore Advance. I feel like the HVLP has a tough time pushing that material unless I thin it almost 20% and have considered using my Graco 490 with either HEA or FFLP tip to get better atomization. Outside of pump/tip recommendation I saw your video recommending Lacquer finishes. My local SW stores looked at me like I had 2 heads when I asked for some of it. I guess EPA requirements won’t let them sell it in stores here (VA), but I would love to be able to work with some of it. I’m really trying to dial in a product and spray method here, and outside of oil products like BM Satin Impervo, it looks like I need to accept these newer waterborne hybrid products and either upgrade my HVLP or go back to the airless. Thoughts? You guys have really changed the final product that we are delivering our clients. We are remodelers, and paint is a big part of that, so thank you for all of your help, and for putting together one of the best resources on CZcams! This is like my college education and I am very grateful that you guys take so much time to produce these wonderful videos!
Your the man Noah. Great job with the questions!!
Oven cleaner works good on taking over spray off bricks ect...👍
Wait are you serious??
Best painter 👍👍👍
I got questions and figured I would ask at the most recent video.
How does one condition paint brushes. Eg home depot purdy brushes? I am asking what product works best and what exactly is it doing? My brushes feel dry and frizzy.
Since I got your attention. How does one make a roll of tape last? I constantly find half used rolls that have dried out.
Conditioning brushes. Home depot has a brush conditioner that's a packet that you add water to and it helps recondition brushes with latex built up on them. The conditioner will destroy china bristle brushes. I always comb and steel brush my brushes and spin them dry prior to storage.
Hey, do you have a video that goes over painting oak/stained trim? Should I spray it brush it? Keeping the wall color as it is.
Well done guys ..just wondering if you have ever used the titan 560e? If so is it any good like the 440 ..cheers
How to spray wall without masking so much? Please do a tip video for that. Masking take so long when I try to spray paint the wall.
Any videos about thinning paint for airless sprayers? Thanks in advance :)
Great Video...P.S. Noah looks like a drawing of a cartoon character a little bit.
Do you ever spray a primer/surfacer to take a wall to level 5? Any experience with SW Builders Solution, USG Tuff-Hide or similar?
What tip do you recommend for trim and doors (310?) Using BM advance with graco cordless sprayer. Also Do you recommend thinning the paint? Thanks
Jeff Poaps did u use the 310? It should of worked fine.
What tip would you recommend for spraying deck stain?
Is it better to roll or spray small bed rooms
They have trim on floors an window
Noah "You're Fired!"
Yeah probably
What is the point of spraying if you have to back brush? Why not just brush in the first place?
lil c's saves a lot of time getting the product on, you would usually have to ‘backbrush’ even if you brush it on to get it all looking even, so spraying will take like 1/4 of the time to get the product on so you can backbrush
What's better for spraying kitchen cabinets hvlp or airless?
Christina HVLP, a more finer (puts more paint on and drys harder than airless) and durable finish with a longer lifespan.
John Ryan thank you
Hlvp better
love you guys but that coffee cup.
Can I roll paint my outside house
Y am professional peiter
If anyone needs help with machines shoot me a message I work and rebuild these things all day!
Do you work on pool pumps or fireproofing
@@timmyfoster5532 nope just the painting stuff sorry
My Graco gun had not been used for a long long time. I recently started using it and all the screwes and bolts that connects to the gun we're stuck I couldn't twist the screws it had hardened. Having hard time unscrewing bolts. What do u recommend I use or do to get the bolts loosened? I tried Wd40 but still stuck. Any advice?
@@martintovmasyan7825 take it off the machine and let it soak in acetone, that should free it up
guy buddy I tried that but I didn't let it soad. I'll let it soak now. Tnx for response
Let me borrow a sprayer, mines shot.
Don't Google search big orifices it took me to the wrong place
wtf is the deal with the coffee cup? jeez