Installing Coilovers in an Aristo/GS300
Vložit
- čas přidán 15. 09. 2020
- Intake! S3E02, How to install Coilovers!
Are you or someone you know a Very Important Person?
Do you have a Japanese Saloon or a desire to own one?
Well look no further as you have discovered Intakes! Guide to Bippu on a Budget!
A new series that takes your car from tragic to magic in 6 beers or more!
In this episode we install some used Tein Coilovers and as Lil Jon said, GET LOW!
DaddyMotor Works:
daddymotorworks.com
/ daddymotorworks
For all your JDM importing needs:
www.importmonky.com
For all your Graphic Design needs:
/ edesignau
For all your JDM nostalgic reading material needs:
/ 7tunecollectibles
Grab a beer or six, kick your feet up and enjoy Intake! Whilst we use Covid-19 as an excuse to binge drink during the day.
Produced in conjunction with Forever Digital, join us as we discover what life is like on the inside of a Yakuza Cruiser!
We are on facebook, click below to stay up to date with whats happening in the world of Intake!
/ intakegearsbeers - Auta a dopravní prostředky
Pro Tip. If you loosen the sway bar link on the rear then the bottom bolt holding the strut comes out easier. There will be no tension on the bolt!
Use leather dye to go a deep burgundy on the leather. Gold leaf all the wood trim and install a "nice" walnut steering wheel and gear knob 😏 Fridge install in the rear for beers 🍻
nah glove box mini fridge conversion
Where will I put my gloves?
Intake! keep em nice and cold my friend
Slap a nrg steering wheel sum star lights and yeeet it lol
we need u back once again, come back plz i need to see the end of this series or the start or a new one plz
6:32 That bang on the guard and the massive paint chip it left behind hurt my soul
Yeah, don't worry about that. Just more drift damage to fix later on.
@@Intaketv Cut em up, pull them wide, weld them back together, use all the bog in the world to make them smooth again and chuck some 50mm spacers on that badboy, proper bippu.
Just been watching your GS300 videos and haven't laughed this much watching car DIY videos! Love the content, hope this channel comes back in the future!
Where did you go? I want more GS300 videos!
So stoked you're back, can't say how much i missed this channel!
Love this channel and content. Some ideas;
VIP curtains
Headrest pillows
Front passenger vip table
Rear centre seat vip table
Led lighting
Star light roof (I think some Rolls Royce have these)
Headrest or roof screens
Keep up the good work, keep sinking those beers and smashing gears!
+1 to the above ;p
Yoooo thanks for this, currently working on my 2000 gs300 rn gonna add these 😙
Nice bro! Looking forward to the next one.
Tuning in from Las Vegas keep the videos coming we support fam ☝️🥂
Thanks for tuning in Mates!
what ever happen to new uploads ??
Looking forward to this series
Please upload again!
I wish you would get another zed project, I really enjoy watching your vids, been through almost all of them some a few times, and I thank you for your help on my own z32
I still have my Z32 and I am still working on it.
@@Intaketv Where's the uploads my friend. We all miss you
Bro just came across this and it’s awesome you I’d love to see more videos!!!
D.A.D interior 👀 neck pillows, curtains, tables, etc..
Needs chrome and fold out trays and all the JDM cup holders. Some bangin' stereo, gold foil stickers, some mint floor mats. Some weird shift knob and getting a steering wheel or boss kit that keeps all the controls
Good shit man keep at it
You guys should make more videos!
Mad video Stivva, keep em coming
We will do our best.... In these unprecedented times 😏
Pretty good video... But I never had to remove the cam bolts in the rear or do you have to remove the control arm up front. Maybe I'm a Magician. 💯👌🌟⭐👏👏
I liked and subscribed cause...dude your funny as hell. And I'm also looking into buying an Aristo / GS300 to make it into a Drift VIP Taxi. Yeah I know talk about $$$ hopefully I can do it on a beer budget
Curtains, glass drink trays, junction produce headrest pillows and lots of gold, black and wood grain with a chandelier as your interior lighting 😉
Good videos, thanks 👍
Nice job mate.
Enjoyed, thanks😉
Nice work brother! Looking tough.
Thanks heaps!
No way you're back again after another disappearance haha so buzzing 👌
Love it
Wheres the next episode?!
Just curious, does the front have the same 2 17mm bolts under the hub to swing it out the way as they do on the IS? Seems basically the exact same set up
underrated channel
my work mate just picked up a 1 of 200 built TOM's aristo 2jzgte
I done this literally last week, I have all the right tools and look to have struggled just as much as you hahaha. Glad I own a Gs the same time you do!
Soooo.... We did OK?
@@Intaketv 100% mate haha felt your pain along the way
When are you gonna upload again? I wanna see how this build turns out
Nice video. What were the tire specs?
make sure to install a cooler or minifridge for your japanese brews
Thank you@!@!@!@
My spring broke
hopefully you saved me 500$ on installation!! wish me luck tmw
Put as many TV's inside that you can
6:31 that’s gonna leave a mark !
Vip is always leather and Woodgreen like a gentlemans club
Well, it came standard with that. We can improve on it. A gentleman's club also has women... We should install one of those.
What exhaust system does it have?
pls come back
Where you guys at?
loving the content! keep up the amazing work!
Will do our best and we also love dogs
Is there going to be more episodes??
Where is Intake! :(
300ZX update, pleaseeeeee
Still bust out need for speed underground every now and then 🤙
Get this man the keys 🔑
What’s your opinion on the previous model GS kind of reminds me of the 300 ZX tail lights
I like them too. I can see where you are going with the 300zx lights. There is a resemblance.
The intro and music made me subscribe 😂, but the video overall is REALLY good 🔥
New video anytime soon man? Hope you're doing ok and everything is well.
When’s the new content coming out?
Nice car , mine looks similar but is a 400
tools used?
How much coilovers ?
Damn that gs soooooo pretttty 😍😍😍
Any new videos rooster
A bit late to the party. Caught the last 5 mins of the live so here to watch from the start
Better late than never! And there is also the ability to hit replay!
@@Intaketv great vid mate. Needs moar low now 😉 and those brake need more big 👍🏻
are those Tiens? I am trying to find suspension for my gs300 and I don't know what to get, and what size are your wheels?
They are teins. The wheels are 19x10.5 on the rear and 9.5 up front.
I built my Lexus with tiens as well
genuine sheepskin seat covers is needed for sure haha.
Brother please return
Can you link that ebay for parts?
And that other source?
alcantara/starlight headliner
When’s the next video coming out?
I’m gonna get tired of re-watching vids in like 2 years
You, my good sir are fuckin awesome!!!
👍
Oh, and I don't want shorter vids from you so no rattle gun😉
I will endeavour with my brrrrr noise and hand tools
What happened to him doing videos
If I had to guess, he’s had a family and hasn’t had the time anymore
1000th like!
my ball joint doesnt want to come out sadly
Black interior w a a sub in the trunk
Beaded seat covers for the ultimate luxury taxi.
Oi, yeah nah, that was a sick episode.
Always relaxing to watch someone else flounder about not knowing what they’re doing either. Makes me feel like less of a hopeless stooge.
What the fuck did I just find lol... subscribed!
WHAT HAPPENED TO THE VIDEOS AND BEER?
bruh what happened ? wheres the content :(
Katana shift knob
What are the rims called??
Work D9R
@@Intaketv thanks mate going to buy and build one of these in a month or 2 and fuck the rims look mean as m’bro
Rip 🪦
*So what happened??? This was literally the last video on the Aristo*
Needs moreeee low.
😀😀😀😀😀😀😀😀
Gotta get some gold in the interior to show you're a baller
Like gold leaf... That's a great idea
Not low enough.
Good choice on the Asahi, now quit fucking spiders and let’s see some more Intake! How about a Christmas special? 😀👍
All black interior and the rolls Royce starlight in the headliner 💀
Great idea
What happened to this bloke?
what happened to this channel??
Y y’all stop making vids
Hear me out here mate because this is gonna sound weird. What about black leather with purple and white LED lighting and brushed stainless inserts? Make it look like some billionaire’s vodka bar/sex dungeon. Oh and sack off the middle seat in the back and replace with a fridge and an IPad.
What happen to this channel ??????
Weeb
needs to be sooooo much lower!