How To Make Resin Jewelry Using URE-FIL™ 19

URE-FIL™ 19 pure aluminum pellet filler can be used with Smooth-On® liquid epoxy and urethane
resins to improve thermal conductivity, dimensional stability, reduce shrinkage in large mass castings, etc. These fillers can also be used to add evenly distributed weight to metal cold-castings and to create artistic casting effects.
URE-FIL™ 19 are large grain aluminum pellets (1200 micron). Larger grain pellets will not fill areas of high detail as well as the smaller grain pellets but both pellet sizes can be used together for more uniform filling.
∙ URE-FIL™ 19 can be added to aluminum-filled urethane and epoxy resins for vacuum forming applications to increase thermal conductivity (even heat distribution) when casting parts for applications with higher temperature requirements.
∙ URE-FIL™ 19 will add evenly distributed weight to metal cold-castings to simulate the feel of solid metal reproductions at a reduced expense compared to metal foundry castings.
∙ URE-FIL™ 19 will lower exothermic (heat) temperatures during cure cycle (see chart on reverse side),
which reduces the shrinkage rate resulting in improved dimensional stability in large mass castings.
∙ URE-FIL™ 19 can be added to liquid urethane and epoxy resins to create metallic visual effects when
used with clear and colored liquid plastics.
Adult Supervision Required
Keep Out Of Reach Of Children
---
Make It Now! with Smooth-On
www.smooth-on.com
/ smoothon
/ smoothon
/ smoothon

[@beansproutmomo]

These look really interesting! Can this be melted down for aluminum casting as well?

[@smoothon]

Yes they could.

[@beansproutmomo]

@@smoothon super cool!

[@blacksmith9451]

Lool like dropplets

[@changamanga100]

Can I use these to make casting epoxy molds for use in thermoforming ?

[@smoothon]

Yes, contact our tech support team for more info.

[@Steven-lw8lg]

No pressure pot needed for this resin?

[@smoothon]

Not for this material. Smooth-Cast 325 is very low viscosity.

[@virgiem1213]

Where to buy the mold? Or, how to make the mold?

[@smoothon]

Check out this tutorial for more info as to how this mold was made: czcams.com/video/8HyVCVfZ_g8/video.html