How to use the MTN PRO Epoxy Primer

DTM anticorrosive epoxy primer with a strong adhesion to iron, steel, aluminum and electrogalvanized steel, providing the necessary adhesion for the color coat, whether it be water or solvent based. Good insulating properties against humidity.
-Good insulating properties agains humidity.
-Can be used in several different sectors, e.g. industrial or automotive.
-Grey finish.
0:19 Wear gloves and mask.
0:23 Sand, degrease and clean the surface with MTN PRO Solvent or MTN PRO Ethyl Alcohol 70% before painting.
0:31 Shake well for 1 minute. If you don't hear the sound of the inner ball, turn it upside down and keep shaking.
0:37 Test the distance and flow of paint on a test surface.
0:45 Apply 2 o 3 thin coats instead of one thick coat.
0:53 Recoatable after 10 minutes.
0:58 Dry-to-touch time is 20 minutes.
1:02 Total drying time is 2 hours.
1:10 Once finished, clean the nozzle by holding the spray can upside down and pressing until only gas comes out.
If you have any questions please contact us at [e-mail]
RECYCLE - REPAIR - RECOAT- REUSE