Wow! Amazing, are you controlling the virtual decks through the rca cables conected to the bcd-3000? How do you do it or where I can find these type lp? Thanks (I dont speak englisj verywell)
Hi yes this is a software called DJay Pro and the LPs are called "DVS" vinyl specifically for that software. The tone from the record goes in through the RCA cables and is converted into control of the music! Also here we are controlling the mixer on the screen using MIDI. Good luck!
have you tested the bdc3000 with a microphone? I am trying to use it as an audio interface for voice-overs, but the voice is super quiet and I am not quite sure why.
There is no way on DJay Pro for Mac to send a MIDI command to change the A Deck input to pass through audio (say playing an actual vinyl record) or change that audio to Mic. Since the iPhone setup has no DVS audio in, though, a mic may work, I have been meaning to try this... may make another video if I get it going. I had no trouble with an old version of Traktor handling the audio in from vinyl, but I don't believe the mic setup was working... for now I use a separate mixing board since I need to have some "oh sh*t" inputs ready to fade in, no prob patching a mic in there...
@@DJGEOnet thanks for the response. I finally managed to send a MIDI message to switch inputs using MIXXX, but I wish there was a way to send it through the OS, in order to use the mic with other softwares. (I just learned about midi messages, so I had to learn from Scratch) Again, thanks for the answer!
@@cabbanisbrasilI was able to use SendMIDI from the MacOS Terminal to change the Channel 1-2 input to Mic. Initial testing with Audacity I did notice that the mic worked very faintly when the input was set to the default Phono input. Sending the program change turned it on like a champ! czcams.com/video/aTrEzXKqoc4/video.htmlsi=suUJ5J_6-3DHohZV
hi, I was thinking of buying it too for my DVS set up... do you know if the Behringer BCD 3000 could work with a serat timecode vinyl and rekordbox as software?
Hey, so I used the BCD-3000 with Traktor and old school Final Scratch time code vinyl which worked fine so I think the key is just the midi setup for the knobs and if the software likes the time code vinyl. As I showed in another video MacOS sees the Behringer as a sound card and that's the key. Thinking of trying Serato too!
Wow! Amazing, are you controlling the virtual decks through the rca cables conected to the bcd-3000? How do you do it or where I can find these type lp? Thanks (I dont speak englisj verywell)
Hi yes this is a software called DJay Pro and the LPs are called "DVS" vinyl specifically for that software. The tone from the record goes in through the RCA cables and is converted into control of the music! Also here we are controlling the mixer on the screen using MIDI. Good luck!
@@DJGEOnet thanks a lot for the explanation, very clear ❤️
hi dear, great work. Need to do something in IOS ipad or iphone for let djay reconize the midi controller?
have you tested the bdc3000 with a microphone? I am trying to use it as an audio interface for voice-overs, but the voice is super quiet and I am not quite sure why.
There is no way on DJay Pro for Mac to send a MIDI command to change the A Deck input to pass through audio (say playing an actual vinyl record) or change that audio to Mic. Since the iPhone setup has no DVS audio in, though, a mic may work, I have been meaning to try this... may make another video if I get it going. I had no trouble with an old version of Traktor handling the audio in from vinyl, but I don't believe the mic setup was working... for now I use a separate mixing board since I need to have some "oh sh*t" inputs ready to fade in, no prob patching a mic in there...
@@DJGEOnet thanks for the response. I finally managed to send a MIDI message to switch inputs using MIXXX, but I wish there was a way to send it through the OS, in order to use the mic with other softwares.
(I just learned about midi messages, so I had to learn from Scratch)
Again, thanks for the answer!
@@cabbanisbrasilI was able to use SendMIDI from the MacOS Terminal to change the Channel 1-2 input to Mic. Initial testing with Audacity I did notice that the mic worked very faintly when the input was set to the default Phono input. Sending the program change turned it on like a champ!
czcams.com/video/aTrEzXKqoc4/video.htmlsi=suUJ5J_6-3DHohZV
hi, I was thinking of buying it too for my DVS set up... do you know if the Behringer BCD 3000 could work with a serat timecode vinyl and rekordbox as software?
Hey, so I used the BCD-3000 with Traktor and old school Final Scratch time code vinyl which worked fine so I think the key is just the midi setup for the knobs and if the software likes the time code vinyl. As I showed in another video MacOS sees the Behringer as a sound card and that's the key. Thinking of trying Serato too!
I trust... then I will buy it second hand and thanks for answering me @@DJGEOnet
Hi dear, does this Dj controller serves as an audio interface?
If yes how great is it
Yes it is an audio interface and yes I think it sounds fine. Specs are available on the Behringer site...
Wow in spanish please 😅
Hi! Do you know if it work on android? Thank you
I have not had any luck getting it to work on Android or PC, and those are what I had first so I really tried. Mac and iOS just worked!