Can Cork Be Beautiful?
Vložit
- čas přidán 7. 12. 2023
- Cork is impermeable, which means liquid cannot penetrate it. I should have known that unprocessed cork would present some challenges, but I was not prepared for just how soft the cork actually was. When the customer approached me with the idea of using Portuguese cork in a project I was hooked, but I had issues sourcing the right sized cork rounds and ended up with way more than I needed. It was fortuitous, though, because I decided to start over with an entirely new casting. In the first casting, the colors mixed and lost their vibrance before the resin cured. I also discovered that my conveniently sized bucket was far too large for the final shape that I had planned. So, I was much more strategic in the 2nd casting. I decided to cast the vase and the base separately. In the first casting I had planned to part off a chunk for the base, which had required more resin and thus more risk of thermal issues in the resin. I also let the mixed and pigmented resin sit for about 18-20 hours before pouring. Thankfully, my shop stayed at about 50-60 degrees F the whole time. The result was ideal, and you can clearly see the green and red swirling together without mixing. I also had issues with resin leakage for both of the castings, and I remembered the Flex Paste trick championed by the one and only Cam Anderson of @BlacktailStudio which, of course, worked like a charm! The sphere was also a first, as I got to try out a new toy--the sphere jig, which will hopefully make more appearances. But I think the cork will get shelved until I figure out how to stabilize it properly. You might notice that I threw everything at this project with multiple coats of CA glue and penetrating epoxy. I quickly discovered why cork is used as bottle stops... it doesn't absorb liquid. Shocker, I know... So that dampens my excitement about using it in future projects, and it also instills doubt on whether stabilization would actually work, but I'm sure someone has figured it out. Perhaps the keen-eyed also noticed that the lip of the vase was actually quite wavy, which was caused by sanding. The soft cork basically disappeared under the sand paper but the resin, being quite hard, maintained it's shape. I ultimately had to embrace the chaos and allow the cork to be what it wanted. There was also a time crunch, as this piece was commissioned as a gift for someone for whom Portugal holds special significance. The shape of this piece was the product of some research into Portuguese pottery designs in combination with some of my own pedestal vase ideas. The shape was also inspired by a viewer who commented on a prior video of mine, lamenting that no one ever makes pedestal vases.
If you enjoyed the video, please smash that LIKE button and Share it with your friends! It really helps support my small business. Please drop a Comment below letting me know your thoughts. Also, thwack that Subscribe button so you don't miss any videos!
Thank you @TotalBoat for providing the epoxy used in this video:
TotalBoat Thickset Fathom Deep Pour Epoxy: www.totalboat.com/collections...
TotalBoat Tabletop Epoxy: www.totalboat.com/products/ta...
TotatBoat Clear UV Cure Resin: www.totalboat.com/collections...
Starbond's CZcams Channel: @StarbondAdhesives
/ starbondadhesives
Use Discount Code ADAMSEN15 for 15% all Starbond products!
Shop Starbond: bit.ly/3hf4oJO
My website and contact info:
www.adamsenwoodcraft.com
Music:
www.epidemicsound.com/referra...
Follow me on Instagram:
@adamsen_woodcraft
See what's up on Facebook:
/ adamsenwoodcraft
REFERRAL LINKS TO PRODUCTS I USE:
Kutzall sphere rotary burr: amzn.to/3eQdWx6
Starbond Clear Thin CA glue: amzn.to/3z0sZdz
Starbond Clear Medium CA glue: amzn.to/3Bb6aqr
Starbond Clear Thick CA glue: amzn.to/3oqiXxE
Starbond Activator: amzn.to/3v9r8Ca
TotalBoat Penetrating Epoxy: amzn.to/3zr1MSH
TotalBoat Thickset Epoxy: amzn.to/3PtTkrw
TotalBoat Tabletop Epoxy: amzn.to/3oke5tQ
Carter & Son 5/8" Bowl Gouge: amzn.to/2G5YV5g
Crown Diamond Parting Tool: amzn.to/2NIqsOj
Tormek T-8 Sharpener: amzn.to/30D2iKA
Easy Wood Tools Carbide Cutter: amzn.to/3z6E6Db
Easy Wood Tools Carbide Cutter: amzn.to/3yH6JVN - Zábava
Awestruck watching your video
❤
Speechless opening my box
❤
Tear struck, knowing it was created, especially for me❣️
Thank you, David ❣️
Thank you, 🩵 Hannes❣️
You’re very welcome! So glad you like it!
As a reptile keeper, I saw all those cork rounds and was immediately jealous. The terrarium terrains I could build with that! My geckos would be royalty!
Go get you some!
@@hannahstraining7476it's dummy expensive for a hobbyist like me. It's like $10/lb. Just the amount he fit in that bucket at the start would cost $50 or more.
I do buy it in small amounts. But the stuff I could build if I could afford how much he had!
My first reaction was, "Oh, that looks like cork! This should be entertaining... and interesting." My thoughts were right, and it was - always enjoy your videos, thanks for sharing.
Thanks Jeff!
That is STAGGERING!!! What on earth gave you the idea & did you envisage just how beautiful it would turn out😵💫
You are a fabulous artist! And the camera work was pretty impressive too.
Thanks Beverley!
Many would stop at the first piece and a few more with the second part. You and your creativity always go the extra steps for a piece of art. Thanks!
Beautiful.... Thanx for sharing your process!!! ✌😎👍
Thanks for watching!
Absolutely gorgeous, beautiful work Mr. Adamsen
Wow, that’s gorgeous! I’m sure your customer is thrilled with the piece!
Thanks!
Well done! Beautiful as always! Loved seeing the first try included!
Thank you!
You always have the most beautiful designs. Just amazing. Thank you for sharing.
Thank you so much!
I'm always so delighted watching your videos, David. No matter what materials you work with, I can be sure it's going to be a beautiful work of art. Thank you so much for sharing with the rest of us the making of this absolutely gorgeous piece.
Thanks very much! I appreciate you watching!
I'm absolutely *amazed* by what you do and the beautiful things you create, but I'm just as amazed by all the tools that you use and how well you use them. Awesome video! Thank you!
Cheers Mike!
❤❤Holy Freaking Cow! Lovely. So many intricate steps! You must have spent so much time and money creating this beautiful work of art. ❤❤❤
Thank you! Yes this on took some planning for sure.
Persistence paid off! Way to work it until you get what you want. Hope the person who receives it truly enjoys it!
Thank you!
In answer to your video title, I would say YES! In the right hands cork is very beautiful!
Thank you!
Unreal. Thank you for this
Greetings from Portugal. Thank you for your lovely tribute to our cork. 💚💛❤
You’re so welcome! Cheers from USA!
David,
That was truly a masterful work of art. Who knew that cork could be used for more than just floor covering and sound proofing. Amazingly beautiful as breathing. More. Bravo!
👍🏼👍🏼👍🏼👍🏼👍🏼
Thank you very much!
This is absolutely stunning!!
Thank you so much!!
I wait and wait until one of your videos appears! I never leave the end of the video disappointed. You truly are gifted with the ability to see the beauty in all of your pieces. I watch many CZcamsrs and for some reason I always remember the thumbs up!! Great work….
Thanks so much, Roxann!
The most beautiful piece I saw it till now ❤️
I just love the way that you continue to fight and not give up. And your pieces always end up being gorgeous. I can't even imagine trying cork. Great job, and please keep sharing your adventures. Thank you!
Thank you so much!
Fantastic, David. That was a lot of work, but the result was outstanding.
Bill
Thanks Bill!
I would love to have that first piece you started. I think it was gorgeous and would make a beautiful lamp
Thank you for reminding me of my portuguese heritage 😁 beautiful piece.
Cheers!
Another gorgeous piece David. The resin colors you picked really make your turning pop.
Thank you for sharing.
Thank you, Carl!
Absolutely beautiful
Thank you!
Absolutely Stunning wood work 😍
Thank you very much!
You took the words right out of my mouth. Stunning art!
And... Oh my! All of those tools!
"Can Cork Be Beautiful?"
Given it's this channel, at 12 seconds into the vid I'm 100% sure that it will be beautiful. ❤
You’re very kind. Thanks!
Very interesting project! I never thought in the first place that cork has these properties and I literally feel your hardships! Well made!
The mottled look with the cork and the resin is stunning.
Thanks Leona!
That is nothing short of *sensational* !!! 👋👋👋👋👋👋👋
Thanks!!
Love your page mate. I’m gonna grab a lathe myself when I get a house and a garage. All the way from Sydney, Australia 🇦🇺
That is beautiful. It may represent Portugal, but it has such a Christmas feel. Love it!
Thanks! Yeah it was rather serendipitous!
@@DavidAdamsen I love all your work! A few tips I picked up from other creators: if you have a difficult medium that is delicate like cork, a stabilizing resin can help if it's soaked before hand. Also, if you want more separation in your resin colors, let it sit and thicken for a bit before you pour it. You probably already know this, but if you don't, I hope you find it helpful!
@@CourtneyClark01 the thing about cork though is that it is impermeable. It seemed not even super thin epoxy or CA glue soaked into it at all. But I did let the casting resin sit overnight before pouring.
Absolutely stunning piece! It looks like a goblet that would be on a giant's table. Incredible work bringing out the beauty of such a difficult wood🩷
Thank you very much!
Now that’s art my friends. The resin colors are simply gorgeous ❤️😍🇺🇸
Thank you so much!
BEAUTIFUL!!!! ❤
As usual, Just amazing!
Thanks Nancy!
Totally gorgeous work!
Thank you!
@@DavidAdamsen you’re welcome
Wow always amazing work! Awesome! Always worth the wait.
Thank you!
You're half artist, half mad scientist. 😉 You take risks that in the end work out to become beautiful creations! 👏👏
Thank you, Lynn!
Absolutely stunning!
Very stunning and beautiful piece David! Im sure Portugal would be proud!!! 👏🏾👏🏾👍🏾👍🏾
Thank you!
That’s some next level artistry. Spider-Man’s web shooters got nothing on you with a carving tool.
Thanks!
Beautiful piece Dave. Thanks for sharing
Thanks!!
It's gorgeous !
What an amazing piece. It’s just beautiful. Thanks for sharing.
Thank you too!
You Sir do amazing work. Thanks for sharing your videos with us. I look forward to seeing what you will create next
Thanks Jeff!
Artistry at the best of turning and a great show of your imagination thank you for sharing ❤
Thanks Trevor!
Very beautiful. One heck of a wine glass...
A very interesting piece. Great job getting the proportions right.
Thanks Doug!
Lovely colours. I imagine it would be easier using cork for larger items if trying to make the finished product less heavy than using, say, the root of an oak tree.
As always, I am in awe of your talent. Thank you for sharing. ❤
Thanks!! Yes, the only problem with cork is that it is impermeable, so it is virtually impossible to stabilize.
Ahhh, yes. I couldn’t put my finger on it. That impermeability must also curb some creativity, having to work a certain way with cork. @@DavidAdamsen Thank you for your response.
Absolutely incredible
Thanks!
I was wondering where you were going with the turning and whether it would turn out well. I like the color scheme and the finish. Everything seemed to work out well in the end. For a second, was not sure if cork would turn well. To my surprise with some resin, it did!!!! In the end, it turned out beautifully, David.
Cheers! Yeah I had the same misgivings, and the final piece isn’t perfect but it’s the beat I could do without a way to stabilize the cork in a vacuum chamber.
I REALLY like those Freud carbide Forstner bits. They seem to work much better than traditional Forstner bit designs. Great work as usual! Thanks for sharing!
You had me a little confused and wondering, UNTIL the end
WOW ! ! !
What an awesome piece of art ..
Thanks for sharing...
The Frye Guy
Thank you!
Sorry...I don't have telegram... I can text though !?!?!@@DavidAdamsen
Should I avoid temptation to say that piece is a corker? Aww Too late.
Turned out really great David!
Thanks Dana!
This one is a real masterpiece!!🎉❤
Another outstanding piece. Thank you for sharing David.
Thanks so much!
Lots of work, stunning result!! 👊👊🤩🤩
Thanks!
Absolutely gorgeous, the color and the cork looks amazing together!!!
Glad I didn't have to clean everything up 😮
Thanks! I try not to think about the cleanup 😅
@@DavidAdamsen 😂😂😂
Simply Outstanding, truly a beautiful work of art.
Thank you!
Yup that's pretty Awesome as usual David, great video thumbs up as always
Thanks Doug!
Beautiful
Thank you
Absolutely beautiful! You have a keen eye🥰
Thanks!
It's amazing to watch a true artist at work. I wish I could buy one of David Adamsen's pieces.
Lovely work, David, and one of your videos wouldn’t be the same without the resin spaghetti off the lathe
Cheers! Thanks for watching!
Wow!!
Beautiful ❤
Thank you!
Stunning work of art David.Keep creating beautiful one of a kinds.God bless.
Olá David! Seu trabalho é extremamente encantador,!
Amo assistir seus vídeos.
Obrigada por compartilhar seus trabalhos incríveis.Saúde e paz!Seja sempre abençoado! Forte abraço 🇧🇷🇧🇷👏👏👏
Thanks so much!
That is just absolutely gorgeous! Very talented!
Thanks!
Wow! What an interesting and unique piece!
As a felow artist and as a Portuguese i deeply thank you for making and sharing this amazing work of art.
Thank you too!
What a phenomenal piece you've created. It's so different and one of a kind. You've inspired me to attempt to create one myself. Thank you😊
Thanks so much! Happy turning!
Parabéns 👏👏👏 verdadeira obra de arte
Thank you!
Remarkable!, stunning
Absolutely stunning, I love it
Thank you! Cheers!
Realmente fantástico, surreal.
Really wasn't expecting much from that cork but as the man in orthopedic shoes said, "I stand corrected".
Thanks Steve!
Wow! That is amazing!
Thank you, Lynn!
Amazing work!!
Nice demo ranch shirt as well
They turned really nice and i love the colours. ❤❤😊😊
Thanks Karen!
Stunning work, David! Really well done!!! 😃
But it didn't look fun to work with cork! 😬
Anyway, stay safe there with your family! 🖖😊
And happy holidays!
Thanks man, I appreciate that. Same to you!
Amazing work, brother! Another epic project!
Thank you, Seth!
Yes, cork can be beautiful!
🤌
Turned out just beautiful
Thanks Lynda!
That. Is. Amazing.
Hey David! Nice job on the project! I’ve been a fan of yours for a while just forgot about you when you had broken your arm back in 2019 I believe it was?! Great to see its functioning like nothing ever happened. Also remember some of your old works from those days! You’re the one that’s inspired me to do my own woodworking. Can’t thank you enough brother! Keep up the good work!😎👍🏻
Hey, thanks so much! I appreciate that.
Loved the color selection on this one. Always happen when I see a new video drop.
Thanks so much!
Did I tell you that I am a 70 yr old quilter? I quilt w 90 yr olds that have done the same thing for the last CENTURY… soooo…I watch your channel bcz you think outside of the box providing inspiration for ME….here is my comment: 👍here is ME looking at you, KID! HOOORAY
Thanks so much for watching!
Great job! Look awesome!!👍
Beautiful piece, beautiful edits on the video…Kudos!
Thank you, Tony!
Wow. Stunning and elegant
🥰
Thank you! 😊
I absolutely love watching your videos, not only are they entertaining, but they are watching a master at his work, but even the mistakes are good too...
Please make more.... soon....
And... You make so much mess, each time, and then it must take you forever to clean up, and then you do it all over again and again, but its spotless each time... 😂 like how do you do that?
Anyways... thank you...
Thanks so much! Yeah I try not to think about the mess…
Speechless
Stunning 👏👏👏
Just Beautiful, what more can you say!
Thank you!
❤ Beautiful work!
Thank you!
Breathtaking! ❤
Thanks!
I am speechless it is so beautiful. You are an amazing artist just wow.
Thanks so much!