South Texas Banshee DC kit for stock harness.
Vložit
- čas přidán 7. 07. 2021
- Tank mount styles are also available. This is a great setup because you are not tied to your regulator or battery. You can alway upgrade or change them.
www.southtexasbanshee.com/pro... - Auta a dopravní prostředky
Miss the vids man. Keep on keeping on!
The best in the game!!!
Ok, will do...thanks a lot! just got done with a motor rebuild, n did it all so far with the help of ur videos..so thanks a lot! gotta keep the banshee alive man, its the baddest four wheeler ever built in my opinion👍
also i noticed that in order for me to see the dot in the carb site glass, i have to have the throttle adjusters turned almost all the way out on top of the carbs?!? do i need a new throttle cable u think??
Hell, I'm doing good to keep mine running. I'm about ready to burn the damn thing.
Do you float stator for ppl and how much do you charge
Nice kit, I'm getting ready to pull the trigger. Particularly because I like your clean connector job and not the cheap knock of connectors. My plan is to put this in a Gen 1 Blaster. All looks good but I can't say 100% if the battery will sit on its side under the seat on the Blaster. Otherwise this looks like it would bolt up once I float the stator. Can you tell me if that's the case or if not any modification I might need to do for the Blaster? Thanks in advance.
Yep just need to float the stator. Here is the link for the 88-02.
The batter will fit green in the little corner tool box. You will need to trim like an 1/8 off the top edge to allow the wire to pass though and not be pinched. I’ve got a of some here from a customer….
www.southtexasbanshee.com/product-page/88-02-dc-harness-with-battery-and-regulator
Would I be able to run speakers ?
So that Battery for raptor? Or what is name?
I'd like to buy one as soon as they are available. Where will I find a listing?
You can buy one now. Message me 361-243-0431
Hey kevin, have u ever had one pipe go cold, everytime u hit the mid range on ur throttle?? Idles fine, and i syncted the carbs with the same type of guage u use... but every time i get on it, one cylinder stops firing it sounds like?? please help!!?
Check to be sure both your needles are on the same setting and that they match. That’s a needle issue. Also be sure your mains are the same size
Need it for 2000 stock banshee
Do everything is plug & play the only thing I need to do is float my stator
Do you still have to float the stator?
2:15
So I bought this dc converter, where do I connect this yellow with red stripe plug coming out of the trail tech regulator
the trail tech regulator installation manual states, the yellow/red wire is not in use, if you just want to use it for charging batteries. so you don't need yellow/red
Why go DC tho 🤔 do you gain any benefits running it
1) You lose the flicker
2) Some LED aren’t happy on AC
3) Allows lights to be run with engine off. Example…light whips/accent lights while parked (so you can look cool) lol
4) some guys use led strips under the tank for “trouble lights” at night to see their engine.
5) gotta have it if your a road legal guy for horn and turn signals
Could u install a bigger battery if u want.?????
of course you can, but the OEM Stator only generates around 75 Watts, so a bigger Batt with more capacity, would not make much sense. this small 1,3 aH is charging faster and the risks of discharge are way lower. so far i know. i run this plug and play setup from STB for around two years, without fuses in the circuit. my Shee has LED Hazards, LED Turn lights with integrated taillights and a couple of more things. it works great. but Battery lost a little of its capacity. i've too much lights stuff on my shee because i need it for a street legal Shee. the headlights are still 2x 35 Watts lightbulbs. i'm still wondering why it works this long lol.
Is on ebay ?
I haven’t listed it just yet. Feel free to message me 361-243-0431
What battery size is this?
Mightymax Batt 12V 1.3Ah - L= 9,7cm / W= 4,2cm / H= 5,2cm
@@mske903 thank you, I'll look it up👍🏼
Hey man I need this asap lol....please send me the link please. I also talked to you on the banshee group on fb
361-243-0431 hit me up
361-243-0431 hit me up
@@kevingalindo1 hey I did. Never got anything from you
@@dominiquewilliams2559 text me right now
@@kevingalindo1 just did
Do you sell these kits??
Right here man
www.southtexasbanshee.com/product-page/banshee-dc-conversion-kit-all-years
@@kevingalindo1 heck thanks man love your videos super helpful
@@kevingalindo1 you still have to float stator correct?
@@notlocw yep, needs to be floated
@@kevingalindo1 that’s what I thought 🤘🏻
Braap Nation. Can’t reply for some reason. 361-243-0431 message me
How i can buy one ?
361-243-0431 hit me up